KaydedilenlerDerginizi ekleyin

Dergiler / Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi / 2026 / Cilt: 41 Sayı: 1

Nano boyutta hBN kaplamanın pil ayırıcılarının fiziksel özelliklerine etkisi

Influence of nanoscale hBN coating on the physical properties of battery separators

Benan Elmusa(ESKISEHIR TECHNICAL UNIVERSİTY)0000-0002-1722-2561
İrfan Töre(ESKİŞEHİR TEKNİK ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0009-0006-0234-241X
Nuran Ay(ESKİŞEHİR TEKNİK ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0000-0002-2228-9904
Sayfa
183–200
Yayın Tarihi
2026-02-20
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

XRD ve FTIR analizleri, hBN kaplamanın başarıyla gerçekleştiğini göstermektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Şarj edilebilir lityum iyon piller (LİP) günümüzde taşınabilir cihazlar ve elektrikli araçlar gibi tüm elektronik cihazlarda kullanılmaktadır.
📊
Temel Bulgular & Veri:Pillerde anot ve katot arasında bulunan ayırıcının temel işlevi pillerin içindeki elektrokimyasal reaksiyona doğrudan dahil olmayıp, şarj-deşarj işlemleri sırasında iyonların verimli bir şekilde aktarılmasını sağlamaktır.
💡
Sonuç & Katkı:XRD ve FTIR analizleri, hBN kaplamanın başarıyla gerçekleştiğini göstermektedir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Hekzagonal bor nitrür · lityum iyon pil ayırıcı · ıslatılabilirlik

Özet

Şarj edilebilir lityum iyon piller (LİP) günümüzde taşınabilir cihazlar ve elektrikli araçlar gibi tüm elektronik cihazlarda kullanılmaktadır. Pillerde anot ve katot arasında bulunan ayırıcının temel işlevi pillerin içindeki elektrokimyasal reaksiyona doğrudan dahil olmayıp, şarj-deşarj işlemleri sırasında iyonların verimli bir şekilde aktarılmasını sağlamaktır. Ticari olarak çeşitli polimerler ve cam fiber ayırıcılar kullanılmaktadır. Bu çalışmada, Celgard 3501(3501), cam fiber Gelon (GF) ve Whatman GF/D cam fiber (WT) ayırıcılar kullanılmıştır. Nano hBN ile hazırlanan farklı çözeltiler ayırıcılara kaplanarak ayırıcıların temel fiziksel özellikleri incelenmiştir. Tüm ayırıcıların faz analizleri (XRD), FTIR analizleri, katlanma davranışı, temas açıları ölçümü, sıcaklığa karşı davranışları, mikroyapıları incelenmiş, kalınlık ve ağırlık değişimi ölçülmüştür. XRD ve FTIR analizleri, hBN kaplamanın başarıyla gerçekleştiğini göstermektedir. Ayırıcıların temas açısı ölçümleri sonuçlarına göre, nano hBN kaplamanın ıslanabilirliği artırdığını, özellikle 3501 kodlu ayırıcıda daha fazla ıslanabilirlik sağladığını ortaya koymuştur. Termal analizlerin sonuçları, nano hBN kaplı ayırıcıların yüksek sıcaklıklarda bile boyutsal stabilitesini koruduğu belirlenmiştir. Kaplama çözeltisinde bağlayıcı olarak kullanılan PVDF miktarına göre ayırıcıların yüzey morfolojisi ve gözenekliliği etkilenmiştir. Sonuçlar, nano hBN kaplamanın, lityum iyon pillerde kullanılan ayırıcıların güvenliği ve performansını artırma potansiyeline sahip olduğunu göstermektedir.

Abstract

Rechargeable lithium-ion batteries (LIB) are currently used in all electronic devices such as portable devices and electric vehicles. The main function of the separator between the anode and cathode in the batteries is not directly involved in the electrochemical reaction inside the battery, but to ensure the efficient transfer of ions during the charge-discharge processes. Various polymers and glass fiber separators are used commercially. In this study, Celgard 3501, Gelon glass fiber and Whatman GF/D separators were utilized. Different solutions prepared with nano hBN were coated on the separators and the basic physical properties of the separators were investigated. Phase analysis (XRD), FTIR analysis, folding behavior, contact angle measurement, behavior against temperature, microstructure of all separators were examined, thickness and weight change were measured. XRD and FTIR analyses show that the nano hBN coating was successfully realized. According to the results of the contact angle measurements of the separators, it was revealed that the nano hBN coating increased the wettability, especially in the separator code 3501, it provided more wettability. Thermal analysis results showed that nano hBN coated separators maintained their dimensional stability even at high temperatures. The surface morphology and porosity of the separators were affected by the amount of PVDF used as a binder in the coating solution. The results indicate that nano hBN coating has the potential to improve the safety and performance of separators used in lithium-ion batteries.

🔖

Bu Makaleye Atıf Yap

Elmusa, B., Töre, İ., Ay, N. (2026). Nano boyutta hBN kaplamanın pil ayırıcılarının fiziksel özelliklerine etkisi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, Cilt: 41 Sayı: 1, 183–200. https://doi.org/10.17341/gazimmfd.1587547

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (91)

  1. Ji D., Kim J., Trend of developing aqueous liquid and gel electrolytes for sustainable, safe, and high-performance Li-ion batteries, Nano-Micro Lett., 16 (1), 1-18, 2024.
  2. Khramenkova A.V., Fadeev S.S., Novikov V.P., Binder-free hybrid materials based on carbon fibers modified with metal oxides as anode materials for lithium-ion batteries, Appl. Phys. A., 130 (3), 2024.
  3. Yılmaz, H., Aras, M., Study of the effect of calendering parameters on physical and electrochemical properties in lithium-ion battery electrodes, Journal of the Faculty of Engineering and Architecture of Gazi University, 39 (3), 1427-1438, 2024.
  4. Pampal E.S., Stojanovska E., Simon B., Kilic A., A review of nanofibrous structures in lithium ion batteries, J. Power Sources, 300, 199-215, 2015.
  5. Scrosati B., Garche J., Lithium batteries: Status, prospects and future, J. Power Sources, 195 (9), 2419-2430, 2010.
  6. Rahman M.M., Manzoor A., Deng J., High temperature and high rate lithium-ion batteries with boron nitride nanotubes coated polypropylene separators, Energy Storage Mater., 19, 352-359, 2019.
  7. Polat D., Keleş Ö., Lityum İyon Pil Teknolojisi, TMMOB Metal. Müh. Odası, 42-48, 2012.
  8. Elmusa B., Ay N., Lityum iyon pilleri ayırıcılarında hekzagonal bor nitrür kullanımı ve gelişmeler, J. Boron, 7 (1), 440-452, 2022.
  9. Waqas M., Ali S., Lv W., High-performance PE-BN/PVDF-HFP bilayer separator for lithium-ion batteries, Adv. Mater. Interfaces, 1801330, 1-10, 2019.
  10. Waqas M., Ali S., Feng C., A robust bi-layer separator with Lewis acid-base interaction for high-rate capacity lithium-ion batteries, Compos. Part B Eng., 177, 107448, 2019.
  11. Slavova M., Slavov I., Terziev V., Application of zeolite and comparable porous materials for enhancing the performance of different types of secondary batteries: A review article, J. Energy Storage, 98, 112949, 2024.
  12. Zhang S.S., A review on electrolyte additives for lithium-ion batteries, J. Power Sources, 162, 1379-1394, 2006.
  13. De Moraes A.C.M., Hyun W.J., Luu N.S., Phase-inversion polymer composite separators based on hexagonal boron nitride nanosheets for high-temperature lithium-ion batteries, ACS Appl. Mater. Interfaces, 12 (7), 8107-8114, 2020.
  14. Feng Y., Interface engineering of quasi-solid poly (vinylidene fluoride) separators for next-generation lithium ion batteries, Coord. Chem. Rev., 518, 216104, 2024.
  15. Liang T., Evolution from passive to active components in lithium metal and lithium-ion batteries separators, Mater. Today Energy, 45, 101684, 2024.
  16. Yuan M., Liu K., Rational design on separators and liquid electrolytes for safer lithium-ion batteries, J. Energy Chem., 43, 58-70, 2020.
  17. Li P., Fast thermal responsive separators toward long life and safe lithium metal batteries, Energy Storage Mater., 17 (4), 2746-2754, 2024.
  18. Chen A., New flexible separators for modification of high-performance lithium-sulfur batteries, J. Alloys Compd., 1005, 176146, 2024.
  19. Song C., Chen Z., Duan C., Polydopamine-boron nitride nanosheet composites with core-shell structures modified PMIA separator for enhanced performance of high-power lithium-ion batteries, J. Energy Storage, 98, 113020, 2024.
  20. Zhai R., Bioinspired OH-BNNS/aramid fiber separator with high mechanical and temperature-tolerant properties for lithium metal batteries, J. Alloys Compd., 992, 174600, 2024.
  21. Prosini P.P., Villano P., Carewska M., A novel intrinsically porous separator for self-standing lithium-ion batteries, Electrochim. Acta, 48 (3), 227-233, 2002.
  22. Zhu J., Understanding glass fiber membrane used as a novel separator for lithium-sulfur batteries, J. Memb. Sci., 504, 89-96, 2016.
  23. Djian D., Alloin F., Martinet S., Lithium-ion batteries with high charge rate capacity Influence of the porous separator, J. Power Sources, 172 (1), 416-421, 2007.
  24. Lee H., Alcoutlabi M., Watson J.V., Zhang X., Polyvinylidene fluoride-co-chlorotrifluoroethylene and polyvinylidene fluoride-co-hexafluoropropylene nanofiber-coated polypropylene microporous battery separator membranes, J. Polym. Sci. Part B Polym. Phys., 51 (5), 349-357, 2013.
  25. Li S.L., Ai X.P., Yang H.X., Cao Y.L., A polytriphenylamine-modified separator with reversible overcharge protection for 3.6 V-class lithium-ion battery, J. Power Sources, 189 (1), 771-774, 2009.
  26. Alcoutlabi M., Lee H., Watson J.V., Zhang X., Preparation and properties of nanofiber-coated composite membranes as battery separators via electrospinning, J. Mater. Sci., 48 (6), 2690-2700, 2013.
  27. Kim J.Y., Lee Y., Lim D.Y., Plasma-modified polyethylene membrane as a separator for lithium-ion polymer battery, Electrochim. Acta, 54 (14), 3714-3719, 2009.
  28. Kim K.J., Kim Y.H., Song J.H., Effect of gamma ray irradiation on thermal and electrochemical properties of polyethylene separator for Li ion batteries, J. Power Sources, 195 (18), 6075-6080, 2010.
  29. Ryou M.H., Lee Y.M., Park J.K., Choi J.W., Mussel-inspired polydopamine-treated polyethylene separators for high-power Li-ion batteries, Adv. Mater., 23 (27), 3066-3070, 2011. 30. Wu M.S., Chiang P.C.J., Lin J.C., Jan Y.S., Correlation between electrochemical characteristics and thermal stability of advanced lithium-ion batteries in abuse tests short-circuit tests, Electrochim. Acta, 49 (11), 1803-1812, 2004. 31. Love C.T., Thermomechanical analysis and durability of commercial micro-porous polymer Li-ion battery separators, J. Power Sources, 196 (5), 2905-2912, 2011.
  30. Arora P., Zhang Z., Battery Separators, Chem. Rev., 104 (10), 4419-4462, 2004.
  31. Kim D.W., Electrochemical characterization of poly(ethylene-co-methyl acrylate)-based gel polymer electrolytes for lithium-ion polymer batteries, J. Power Sources, 87 (1), 78-83, 2000.
  32. Takemura D., A powder particle size effect on ceramic powder based separator for lithium rechargeable battery, J. Power Sources, 146 (1-2), 779-783, 2005.
  33. Yu Z., Wang X., Bian H., Enhancement of the heat conduction performance of boron nitride/cellulosic fibre insulating composites, PLoS One, 13 (7), 1-10, 2018.
  34. Yang C.M., Kim H.S., Na B.K., Gel-type polymer electrolytes with different types of ceramic fillers and lithium salts for lithium-ion polymer batteries, J. Power Sources, 156 (2), 574-580, 2006.
  35. Batyrgali N., Yerkinbekova Y., Tolganbek N., Recent advances on modification of separator for Li/S batteries, ACS Appl. Energy Mater., 6 (2), 588-604, 2023.
  36. Park J.H., Close-packed SiO2/poly(methyl methacrylate) binary nanoparticles-coated polyethylene separators for lithium-ion batteries, J. Power Sources, 195 (24), 8306-8310, 2010.
  37. Jeong H.S., Lee S.Y., Closely packed SiO2 nanoparticles/poly(vinylidene fluoride-hexafluoropropylene) layers-coated polyethylene separators for lithium-ion batteries, J. Power Sources, 196 (16), 6716-6722, 2011.
  38. Jeong H.S., Kim D.W., Jeong Y.U., Lee S.Y., Effect of phase inversion on microporous structure development of Al2O3/poly(vinylidene fluoride-hexafluoropropylene)-based ceramic composite separators for lithium-ion batteries, J. Power Sources, 195 (18), 6116-6121, 2010.
  39. Kim K.M., Park N.G., Ryu K.S., Chang S.H., Characteristics of PVdF-HFP/TiO2 composite membrane electrolytes prepared by phase inversion and conventional casting methods, Electrochim. Acta, 51 (26), 5636-5644, 2006.
  40. Miao R., PVDF-HFP-based porous polymer electrolyte membranes for lithium-ion batteries, J. Power Sources, 184 (2), 420-426, 2008.
  41. Xiang Y., Advanced separators for lithium-ion and lithium-sulfur batteries: A review of recent progress, ChemSusChem, 9 (21), 3023-3039, 2016.
  42. Luiso S., Fedkiw P., Lithium-ion battery separators: Recent developments and state of art, Curr. Opin. Electrochem., 20, 99-107, 2020.
  43. Zhi M., Review of prevention and mitigation technologies for thermal runaway in lithium-ion batteries, Aerosp. Traffic Saf., 1 (1), 55-72, 2024.
  44. Yang Q.J., Reasonable suppression of polysulfides/polyselenides shuttle based on MXene in Na-SeS2 batteries, Rare Met., 42 (5), 1594-1602, 2023.
  45. Zhou H., Cellulose filter papers derived separator featuring effective ion transferring channels for sodium-ion batteries, J. Power Sources, 558, 232649, 2023.
  46. Ponnada S., Kiai M.S., Gorle D.B., Application of facile graphene oxide binders with nanocomposites for efficient separator performance in lithium sulfur batteries, Energy Fuels, 35 (15), 12619-12627, 2021.
  47. Ashraf M.A., Aligned bilayer of single-walled carbon nanotubes suppresses the polysulfide shuttle in Li-S batteries, ACS Appl. Energy Mater., 5 (12), 15649-15655, 2022.
  48. Zhi C., Bando Y., Tang C., Large-scale fabrication of boron nitride nanosheets and their utilization in polymeric composites with improved thermal and mechanical properties, Adv. Mater., 21 (28), 2889-2893, 2009.
  49. Zheng Z., Cox M.C., Li B., Surface modification of hexagonal boron nitride nanomaterials: A review, J. Mater. Sci., 53 (1), 66-99, 2018.
  50. Sharma V., Kagdada H.L., Jha P.K., Thermal transport properties of boron nitride based materials: A review, Renew. Sustain. Energy Rev., 120, 109622, 2020.
  51. Li C., Bando Y., Zhi C., Huang Y., Golberg D., Thickness-Dependent Bending Modulus of Hexagonal Boron Nitride Nanosheets, Nanotechnology, 20 (38), 385707, 2009.
  52. Mateti S., Sultana I., Chen Y., Kota M., Rahman M.M., Boron Nitride-Based Nanomaterials: Synthesis and Application in Rechargeable Batteries, Batteries, 9 (7), 344, 2023.
  53. Dover Flexo Electronics, Inc., Battery manufacturing tension control, https://dfe.com/applications/battery-manufacturing-tension-control/, 2021.
  54. Linden D., Reddy T., Handbook of Batteries, 3rd ed., McGraw-Hill Professional, ISBN 0071359788, 2002.
  55. Malzeme Bilimi ve Mühendislik Sitesi, Tesla bataryalarının bileşenleri ve sağladığı faydalar [Components and Benefits of Tesla Batteries], https://malzemebilimi.net/tesla-bataryalarinin-bilesenleri-ve-sagladigi-faydalar.html, 2021.
  56. Zhang S.S., Jow T.R., Amine K., Henriksen G.L., LiPF₆–EC–EMC electrolyte for Li-ion battery, J. Power Sources, 107 (1), 18–23, 2002.
  57. Hong J., Thermodynamically and physically stable dendrite-free Li interface with layered boron nitride separators, ACS Sustain. Chem. Eng., 9 (11), 4185-4193, 2021.
  58. Chen Y., Kang Q., Jiang P., Huang X., Rapid, high-efficient and scalable exfoliation of high-quality boron nitride nanosheets and their application in lithium-sulfur batteries, Nano Res., 14 (7), 2424-2431, 2021.
  59. Liu J., et al., Hexagonal Boron Nitride-Coated Polyimide Ion Track Etched Separator with Enhanced Thermal Conductivity and High-Temperature Stability for Lithium-Ion Batteries, ACS Appl. Energy Mater., 5 (7), 8639–8649, 2022.
  60. Shi J., Yao Y., Xue L., Li K., Ning J., Jiang F., Huang F., Application of magnetron sputtering to deposit a multicomponent separator with polysulfide chemisorption and electrode stabilization for high-performance lithium sulfur batteries, Surf. Coat. Technol., 405, 126580, 2021.
  61. de Moraes A.C.M., Hyun W.J., Seo J.W.T., Downing J.R., Lim J.M., Hersam M.C., Ion‐conductive, viscosity‐tunable hexagonal boron nitride nanosheet inks, Adv. Funct. Mater., 29 (39), 1902245, 2019.
  62. Garg S., Singh A.K., Parmar A.S., Hexagonal boron nitride decorated polypropylene separator for dendritic free sodium deposition and stripping, J. Electrochem. Soc., 170 (12), 120513, 2023.
  63. Yang Y., et al., Ultrafast self-assembly of supramolecular hydrogels toward novel flame-retardant separator for safe lithium ion battery, J. Colloid Interface Sci., 649, 591–600, 2023.
  64. Lei Y., et al., Defect-driven ion storage on hexagonal boron nitride for fire-safe and high-performance lithium-ion batteries, Chem. Eng. J., 498, 155347, 2024.
  65. Sergi C., Sarasini F., Tirillò J., Santulli C., Influence of reprocessing cycles on the morphological, thermal and mechanical properties of flax/basalt hybrid polypropylene composites, Sustain. Mater. Technol., 36, e00648, 2023.
  66. Wang S., Ajji A., Guo S., Xiong C., Preparation of microporous polypropylene/titanium dioxide composite membranes with enhanced electrolyte uptake capability via melt extruding and stretching, Polymers, 9 (3), 110, 2017.
  67. Kaland H., Fagerli F.H., Hadler‐Jacobsen J., Zhao‐Karger Z., Fichtner M., Wiik K., Wagner N.P., Performance study of MXene/carbon nanotube composites for current collector‐ and binder‐free Mg–S batteries, ChemSusChem, 14 (8), 1864–1873, 2021.
  68. Arslan K., Murathan A. M., Murathan H. B., Effect of reaction time on synthesis of boron nitride microtube (BNMT), Journal of the Faculty of Engineering and Architecture of Gazi University, 32 (3), 977–986, 2017.
  69. Maestre C., Li Y., Garnier V., Steyer P., Roux S., Plaud A., Loiseau A., et al., From the synthesis of hBN crystals to their use as nanosheets in van der Waals heterostructures, 2D Mater., 9 (3), 035008, 2022.
  70. Yuan S., Toury B., Journet C., Brioude A., Synthesis of hexagonal boron nitride graphene-like few layers, Nanoscale, 6 (14), 7838-7841, 2014.
  71. Matović B., Synthesis and characterization of nanocrystaline hexagonal boron nitride powders: XRD and luminescence properties, Ceram. Int., 42 (15), 16655-16658, 2016.
  72. Chen X., Growth of hexagonal boron nitride films on silicon substrates by low-pressure chemical vapor deposition, J. Mater. Sci. Mater. Electron., 32 (3), 3713-3719, 2021.
  73. Zhang B., High-efficient liquid exfoliation of boron nitride nanosheets using aqueous solution of alkanolamine, Nanoscale Res. Lett., 12 (1), 1-6, 2017.
  74. Mohamadi S., Preparation and Characterization of PVDF/PMMA/Graphene Polymer Blend Nanocomposites by Using ATR-FTIR Technique, Infrared Spectroscopy-Materials Science, Engineering and Technology, 1, 213–232, 2012.
  75. Ali S., Highly efficient PVDF-HFP/colloidal alumina composite separator for high-temperature lithium-ion batteries, Adv. Mater. Interfaces, 5 (5), 1701147, 2018.
  76. Waqas M., Ali S., Feng C., Recent development in separators for high-temperature lithium-ion batteries, Small, 15, 1901689, 2019.
  77. Sundaram N.T.K., Subramania A., Microstructure of PVdF-co-HFP based electrolyte prepared by preferential polymer dissolution process, J. Membr. Sci., 289 (1-2), 1-6, 2007.
  78. Dhar Y., Han Y., Current developments in biofilm treatments: Wound and implant infections, Eng. Regen., 1, 64-75, 2020.
  79. Yin X., Thermal conductive 2D boron nitride for high-performance all-solid-state lithium-sulfur batteries, Adv. Sci., 7 (19), 1-7, 2020.
  80. Kirchhöfer M., Von Zamory J., Paillard E., Passerini S., Separators for li-ion and li-metal battery including ionic liquid based electrolytes based on the TFSI- and FSI- anions, Int. J. Mol. Sci., 15 (8), 14868-14890, 2014.
  81. Yuennan J., Nawae S., Tohluebaji N., Preparation of superhydrophobic surface on P(VDF-HFP) fibers by electrospinning technique, J. Phys. Conf. Ser., 1719 (1), 2021.
  82. Baldwin R.S., Guzik M., Skierski M., Properties and Performance Attributes of Novel Co-Extruded Polyolefin Battery Separator Materials: Mechanical Properties-Part 1, NASA/TM-2011-216979/Part 1, 2011
  83. Wang B., Highly thermally conductive PVDF-based ternary dielectric composites via engineering hybrid filler networks, Compos. Part B Eng., 191, 107978, 2020.
  84. Dai X., Research progress on high-temperature resistant polymer separators for lithium-ion batteries, Energy Storage Mater., 51, 638-659, 2022.
  85. Wang L., Liu J., Haller S., Wang Y., Xia Y., A scalable hybrid separator for a high performance lithium-sulfur battery, Chem. Commun., 51 (32), 6996-6999, 2015.
  86. Zhao Z., Aluminum silicate fiber membrane A costeffective substitute for fiber glass separator in LiO2 battery, Mater. Today Energy, 17, 1-7, 2020.
  87. Ma X., High efficient recycling of glass fiber separator for sodium-ion batteries, Ceram. Int., 49 (14), 23598-23604, 2023.
  88. Li Y., Glass fiber separator coated by porous carbon nanofiber derived from immiscible PAN/PMMA for high-performance lithium-sulfur batteries, J. Memb. Sci., 552, 31-42, 2018.
  89. Ma X., Efficient utilization of glass fiber separator for low-cost sodium-ion batteries, Int. J. Miner. Metall. Mater., 30 (10), 1878-1886, 2023.
  90. Hsia T.N., Superdry poly(vinylidene fluoride-co-hexafluoropropylene) coating on a lithium anode as a protective layer and separator for a high-performance lithium-oxygen battery, J. Colloid Interface Sci., 626, 524-534, 2022.
  91. Kong L., Li Y., Feng W., Strategies to Solve Lithium Battery Thermal Runaway: From Mechanism to Modification, Electrochemical Energy Reviews, 4, 4, 2021.