KaydedilenlerDerginizi ekleyin

Dergiler / Gazi Beden Eğitimi ve Spor Bilimleri Dergisi / 2026 / Volume: 29 Issue: 3

Düşük Maliyetle Geliştirilen Bir Kuvvet Platformunun Doğrulama Çalışması

The Validation Study of a Low-Cost Force Platform

İzzet İnce(Ankara Yıldırım Beyazıt Üniversitesi, Spor Bilimleri Fakültesi, Antrenörlük Eğitimi Bölümü)0000-0002-6566-5201
Sayfa
—
Yayın Tarihi
2024-07-31
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Geçerlik analizleri, t-testi sonuçları AS için önemsiz bulunurken (p=0.263), ASRK için anlamlı bir fark (p=0.001) tespit edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu araştırmada, donanımı ve yazılımı yazar tarafından geliştirilen bir kuvvet platformunun test-tekrar test güvenilirliği ve eş zamanlı ölçüm geçerliği değerlendirilmiştir.
📊
Temel Bulgular & Veri:Araştırmaya 17 katılımcı dahil edilmiş, her bir test için 60 veri analize alınmıştır.
💡
Sonuç & Katkı:Geçerlik analizleri, t-testi sonuçları AS için önemsiz bulunurken (p=0.263), ASRK için anlamlı bir fark (p=0.001) tespit edilmiştir.
🔬Tür:Uygulamalı Anket & Alan Araştırması
📍Kapsam:17 katılımcı
⚙️Değişkenler:Kinetics and kinematics · Power · Jump

Özet

Bu araştırmada, donanımı ve yazılımı yazar tarafından geliştirilen bir kuvvet platformunun test-tekrar test güvenilirliği ve eş zamanlı ölçüm geçerliği değerlendirilmiştir. Araştırmaya 17 katılımcı dahil edilmiş, her bir test için 60 veri analize alınmıştır. Güvenirlik için aktif sıçrama yüksekliği (AS), aktif sıçrama maksimal kuvvet (ASMK) ve izometrik orta uyluk çekiş (İOUÇ) testleri uygulanmıştır. Geçerlik için bir ticari kuvvet platformu kriter cihaz olarak kullanılmış ve 1000 Hz örnekleme hızıyla AS ile AS relatif kuvvet (ASRK) testleri uygulanmıştır. Güvenirlik analizleri sınıf içi korelasyon katsayısı (ICC), varyasyon katsayısı (CV), ölçümlerin standart hatası (SEm) ve algılanabilir minimum değişim (MDC) üzerinden yapılmıştır. Geçerlik analizlerinde ise eşli örneklemler t-testi, Blant-Altman analizi ve regresyon analizleri kullanılmıştır. Güvenirlik analizlerinde, ICC değerleri yüksek düzeyde (0.988 - 0.995) bulunurken, CV değerleri %2.30 ile %4.91 aralığında değişmiştir. SEM değerleri AS için 0.93 cm, ASMK için 47.47 N ve İOUÇ için 90.05 N olarak belirlenmiştir. MDC değerleri AS için 2.59 cm, ASMK için 130.47 N ve İOUÇ için 32.49 N aralığında yer almıştır. Geçerlik analizleri, t-testi sonuçları AS için önemsiz bulunurken (p=0.263), ASRK için anlamlı bir fark (p=0.001) tespit edilmiştir. Blant- Altman analizi sonuçlarına göre mutlak fark ortalaması AS için 0.00016 cm (-0.010 cm - 0.008 cm), ASRK için 0.015 N (-0.215 N - 0.286 N) olarak bulunmuştur. Regresyon analizinde, R2 değerleri yüksek (0.967 - 0.988) bulunmuş, her iki ölçümde de regresyon kesim noktası güven aralığı 0değerini içermiştir, eğim noktası güven aralığı ise 1 değerini içermiştir. Bu araştırmanın sonuçları, geliştirilen cihazın test-tekrar test güvenirliğinin ve eş zamanlı geçerliğinin yüksek düzeyde olduğunu ve uygulamada kullanılabilecek yeterliliğe sahip olduğunu göstermektedir.

Abstract

In this study, the test-retest reliability and concurrent validity of a force platform, developed by the author with custom hardware and software, were evaluated. Seventeen participants were included in the study, with 60 data points analyzed for each test. For reliability assessment, counter movement jump (CMJ), counter movement jump force (CMJF), and isometric mid-thigh pull (IMTP) tests were conducted. For validity, a commercial force platform was used as the criterion device,and CMJ and CMJ relative force (CMJRF) tests were conducted at a sampling rate of 1000 Hz. Reliability analyses included intraclass correlation coefficients (ICC), coefficients of variation (CV), standard error of measurements (SEM), and minimal detectable change (MDC). Validity analyses included paired samples t-tests, Bland Altman analyses, and regression analyses. In reliability analyses, ICC values were found to be high (0.988 - 0.995), while CV values ranged from 2.30% to 4.91%. SEM values were determined to be 0.93 cm for CMJ, 47.47 N for CMJF, and 90.05 N for IMTP.MDC values ranged from 2.59 cm for CMJ to 130.47N for CMJF and 32.49N for IMTP. Validity analyses revealed no significant differences for CMJ (p=0.263) but significant differences for CMJRF (p=0.001) in t-test results. According to Bland-Altman analysis, the mean absolute difference was 0.00016 cm for CMJ (-0.010 cm - 0.008 cm) and 0.015 N for CMJRF (-0.215 N - 0.286 N). Regression analyses showed high R2 values (0.967 - 0.988), with regression intercept confidence intervals containing 0 and slope confidence intervals containing 1 for both measurements. The results of this study indicate that the developed device exhibits high levels of test-retest reliability and concurrent validity, demonstrating suitability for practical application.

🔖

Bu Makaleye Atıf Yap

İnce, İ. (2024). Düşük Maliyetle Geliştirilen Bir Kuvvet Platformunun Doğrulama Çalışması. Gazi Beden Eğitimi ve Spor Bilimleri Dergisi, Volume: 29 Issue: 3. https://doi.org/10.53434/gbesbd.1428875

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (69)

  1. Ashworth, B., Hogben, P., Singh, N., Tulloch, L. ve Cohen, D. D. (2018). The Athletic Shoulder (ASH) test: reliability of a novel upper body isometric strength test in elite rugby players. BMJ Open Sport Exerc Med, 4(1), e000365. doi:10.1136/bmjsem-2018-000365
  2. Atkinson, G. veNevill, A. M. (1998). Statistical methods for assessing measurement error (reliability) in variables relevant to sports medicine. Sports Medicine, 26(4), 217-238. doi:10.2165/00007256-199826040-00002
  3. Badby, A. J., Mundy, P. D., Comfort, P., Lake, J. P. ve McMahon, J. J. (2023). The validity of Hawkin Dynamics wireless dual force plates for measuring countermovement jump and drop jump variables. Sensors, 23(10), 4820.
  4. Barbalho, M., Kleiner, A. F. R., Callegari, B., de Lima, R. C., da Silva Souza, G., e Silva, A. d. A. C. ve Coswig, V. S. (2020). Assessing interlimb jump asymmetry in young soccer players: the my jump 2 APP. International Journal of Sports Physiology and Performance, 16(1), 19-27.
  5. Beckerman, H., Roebroeck, M., Lankhorst, G., Becher, J., Bezemer, P. D. ve Verbeek, A. (2001). Smallest real difference, a link between reproducibility and responsiveness. Quality of Life Research, 10, 571-578.
  6. Beckham, G., Suchomel, T. ve Mizuguchi, S. (2014). Force plate use in performance monitoring and sport science testing. New Studies in Athletics, 29(3), 25-37.
  7. Beingolea, J. R., Rodrigues, H. A., Zegarra, M., Sulla-Espinoza, E., Torres-Silva, R. ve Rendulich, J. (2021). Designing a multiaxial extensometric force platform: a manufacturing experience. Electronics, 10(16). doi:10.3390/electronics10161907
  8. Celik, H., Yildirim, A., Unver, E., Mavili, C., Yilmaz, E., Ozturk, F.,. Alpan Cinemre, S. (2023). Force-time analysis of the drop jump: reliability of jump measures and calculation methods for measuring jump height. Measurement in Physical Education and Exercise Science, 1-14.
  9. Cormack, S. J., Newton, R. U., McGuigan, M. R. ve Doyle, T. L. (2008). Reliability of measures obtained during single and repeated countermovement jumps. International Journal Sports Physiol Perform, 3(2), 131-144. doi:10.1123/ijspp.3.2.131
  10. Courel-Ibanez, J., Martinez-Cava, A., Moran-Navarro, R., Escribano-Penas, P., Chavarren-Cabrero, J., Gonzalez-Badillo, J. J. ve Pallares, J. G. (2019). Reproducibility and repeatability of five different technologies for bar velocity measurement in resistance training. Ann Biomed Eng, 47(7), 1523-1538. doi:10.1007/s10439-019-02265-6
  11. Çelik, H., Mavili, C., Yılmaz, E., Ünver, E., Öztürk, F., Bulut, S.,. Cinemre, Ş. A. (2023). Genç basketbol oyuncularında izometrik orta uyluk çekme testinin güvenirliği. Spor Bilimleri Dergisi, 34(2), 59-70. doi:10.17644/sbd.1180205
  12. Duarte, M. ve Freitas, S. M. (2010). Revisão sobre posturografia baseada em plataforma de força para avaliação do equilíbrio. Brazilian Journal of Physical Therapy, 14, 183-192.
  13. Eagles, A. N., Sayers, M. G. L., Bousson, M. ve Lovell, D. I. (2015). Current methodologies and implications of phase identification of the vertical jump: A systematic review and meta-analysis. Sports Medicine, 45, 1311-1323.
  14. Eythorsdottir, I. E. T. (2022). The force platform project: how to compare jump height measured by different force platform systems?
  15. Fransz, D. P., Huurnink, A., Kingma, I., Verhagen, E. A. ve van Dieen, J. H. (2013). A systematic review and meta-analysis of dynamic tests and related force plate parameters used to evaluate neuromusculoskeletal function in foot and ankle pathology. Clin Biomech (Bristol, Avon), 28(6), 591-601.
  16. García-López, J., Morante, J. C., Ogueta-Alday, A. ve Rodríguez-Marroyo, J. A. (2013). The type of mat (contact vs. photocell) affects vertical jump height estimated from flight time. The Journal of Strength & Conditioning Research, 27(4), 1162-1167.
  17. Garnacho-Castaño, M. V., López-Lastra, S. ve Maté-Muñoz, J. L. (2015). Reliability and validity assessment of a linear position transducer. Journal of Sports Science & Medicine, 14(1), 128.
  18. Gençoğlu, C., Ulupınar, S., Özbay, S., Turan, M., Savaş, B. Ç., Asan, S. ve İnce, İ. (2023). Validity and reliability of “My Jump app” to assess vertical jump performance: a meta-analytic review. Scientific Reports, 13(1), 20137.
  19. González-Badillo, J. J. ve Sánchez-Medina, L. (2010). Movement velocity as a measure of loading intensity in resistance training. International journal of Sports Medicine, 347-352.
  20. Hatze, H. (1998). Validity and Reliability of methods for testing vertical jumping performance. Journal of Applied Biomechanics, 14(2), 127-140. doi:10.1123/jab.14.2.127
  21. Hopkins, W. G. (2000). Measures of reliability in sports medicine and science. Sports Medicine, 30, 1-15.
  22. Hopkins, W. G. (2014). A scale of magnitudes for effect statistics. 2002. A new view of statistics from http://sportsci. org/resource/stats/effectmag. html. Accessed, 1.
  23. Hori, N., Newton, R. U., Andrews, W. A., Kawamori, N., McGuigan, M. R. ve Nosaka, K. (2008). Does performance of hang power clean differentiate performance of jumping, sprinting, and changing of direction? The Journal of Strength & Conditioning Research, 22(2), 412-418.
  24. İnce, İ. (2019). Effects of split style olympic weightlifting training on leg stiffness vertical jump change of direction and sprint in collegiate volleyball players. Universal Journal of Educational Research, 7(1), 24-31.
  25. İnce, I. ve Ulupınar, S. (2020). Prediction of competition performance via selected strength-power tests in junior weightlifters. The Journal of Sports Medicine and Physical Fitness, 60(2), 236-243.
  26. İnce, İ., Ulupınar, S. ve Özbay, S. (2020). Body composition isokinetic knee extensor strength and balance as predictors of competition performance in junior weightlifters. Isokinetics and Exercise Science, 28(2), 215-222.
  27. James, L. P., Roberts, L. A., Haff, G. G., Kelly, V. G. ve Beckman, E. M. (2017). Validity and reliability of a portable isometric mid-thigh clean pull. The Journal of Strength & Conditioning Research, 31(5), 1378-1386.
  28. Kellis, S. E., Tsitskaris, G. K., Nikopoulou, M. D. ve Mousikou, K. C. (1999). The evaluation of jumping ability of male and female basketball players according to their chronological age and major leagues. The Journal of Strength & Conditioning Research, 13(1), 40-46.
  29. Keogh, C., Collins, D., Warrington, G. ve Comyns, T. (2020). Intra-trial reliability and usefulness of isometric mid-thigh pull testing on portable force plates. Journal of Human Kinetics, 71(1), 33-45.
  30. Królikowska, A., Mika, A., Plaskota, B., Daszkiewicz, M., Kentel, M., Kołcz, A.,. Reichert, P. (2022). Reliability and validity of the athletic shoulder (ASH) test performed using portable isometric-based strength training device. Biology, 11(4), 577.
  31. Lake, J., Mundy, P., Comfort, P., McMahon, J. J., Suchomel, T. J. ve Carden, P. (2018). Concurrent validity of a portable force plate using vertical jump force-time characteristics. J Appl Biomech, 34(5), 410-413. doi:10.1123/jab.2017-0371
  32. Lindberg, K., Solberg, P., Bjørnsen, T., Helland, C., Rønnestad, B., Thorsen Frank, M.,. Paulsen, G. (2022). Strength and power testing of athletes: a multicenter study of test–retest reliability. International journal of Sports Physiology and Performance, 17(7), 1103-1110. doi:10.1123/ijspp.2021-0558
  33. Linthorne, N. P. (2001). Analysis of standing vertical jumps using a force platform. American Journal of Physics, 69(11), 1198-1204.
  34. Lombard, W., Reid, S., Pearson, K. ve Lambert, M. (2017). Reliability of metrics associated with a counter-movement jump performed on a force plate. Measurement in Physical Education and Exercise Science, 21(4), 235-243.
  35. Ludbrook, J. (1997). Special article comparing methods of measurement. Clinical and Experimental Pharmacology and Physiology, 24(2), 193-203.
  36. Maffiuletti, N. A., Aagaard, P., Blazevich, A. J., Folland, J., Tillin, N. ve Duchateau, J. (2016). Rate of force development: physiological and methodological considerations. Eur J Appl Physiol, 116(6), 1091-1116. doi:10.1007/s00421-016-3346-6
  37. Manske, R. ve Reiman, M. (2013). Functional performance testing for power and return to sports. Sports Health, 5(3), 244-250.
  38. Marques, M., Saavedra, F., Abrantes, C. ve Aidar, F. (2011). Associations between rate of force development metrics and throwing velocity in elite team handball players: a short research report. Journal of Human Kinetics, 29(Special-Issue), 53-57.
  39. Matheson, L. A., Duffy, S., Maroof, A., Gibbons, R., Duffy, C. ve Roth, J. (2013). Intra- and inter-rater reliability of jumping mechanography muscle function assessments. J Musculoskelet Neuronal Interact, 13(4), 480-486.
  40. McLellan, C. P., Lovell, D. I. ve Gass, G. C. (2011). The role of rate of force development on vertical jump performance. The Journal of Strength & Conditioning Research, 25(2), 379-385.
  41. Merrigan, J. J., Stone, J. D., Hornsby, W. G. ve Hagen, J. A. (2021). Identifying reliable and relatable force–time metrics in athletes—considerations for the isometric mid-thigh pull and countermovement jump. Sports, 9(1), 4.
  42. Merrigan, J. J., Strang, A., Eckerle, J., Mackowski, N., Hierholzer, K., Ray, N. T.,. Briggs, R. A. (2024). Countermovement Jump Force-Time Curve Analyses: Reliability and Comparability Across Force Plate Systems. The Journal of Strength & Conditioning Research, 2024, 38.1: 30-37.
  43. Moir, G. L., Garcia, A. ve Dwyer, G. B. (2009). Intersession reliability of kinematic and kinetic variables during vertical jumps in men and women. International Journal of Sports Physiology And Performance, 4(3), 317-330. doi:10.1123/ijspp.4.3.317
  44. Nimphius, S., McGuigan, M. R. ve Newton, R. U. (2010). Relationship between strength, power, speed, and change of direction performance of female softball players. The Journal of Strength & Conditioning Research, 24(4), 885-895.
  45. Olds, M., McLaine, S. ve Magni, N. (2023). Validity and Reliability of the Kinvent Handheld Dynamometer in the Athletic Shoulder Test. Journal of Sport Rehabilitation, 1(aop), 1-9.
  46. Pardos-Mainer, E., Lozano, D., Torrontegui-Duarte, M., Cartón-Llorente, A. ve Roso-Moliner, A. (2021). Effects of strength vs. plyometric training programs on vertical jumping, linear sprint and change of direction speed performance in female soccer players: a systematic review and meta-analysis. Int J Environ Res Public Health, 18(2). doi:10.3390/ijerph18020401
  47. Patoz, A., Lussiana, T., Breine, B., Gindre, C. ve Malatesta, D. (2022). A single sacral-mounted inertial measurement unit to estimate peak vertical ground reaction force, contact time, and flight time in running. Sensors, 22(3), 784.
  48. Perez-Castilla, A., Piepoli, A., Delgado-García, G., Garrido-Blanca, G. ve García-Ramos, A. (2019). Reliability and concurrent validity of seven commercially available devices for the assessment of movement velocity at different intensities during the bench press. The Journal of Strength & Conditioning Research, 33(5), 1258-1265.
  49. Peterson Silveira, R., Stergiou, P., Carpes, F. P., Castro, F. A. d. S., Katz, L. ve Stefanyshyn, D. J. (2017). Validity of a portable force platform for assessing biomechanical parameters in three different tasks. Sports Biomechanics, 16(2), 177-186.
  50. Prue, P., McGuigan, M. ve Newton, R. (2010). Influence of strength on magnitude and mechanisms of adaptation to power training. Med. Sci. Sports Exerc, 42, 1566-1581.
  51. Ramirez-Campillo, R., Andrade, D. C., Nikolaidis, P. T., Moran, J., Clemente, F. M., Chaabene, H. ve Comfort, P. (2020). Effects of plyometric jump training on vertical jump height of volleyball players: a systematic review with meta-analysis of randomized-controlled trial. J Sports Sci Med, 19(3), 489-499.
  52. Raymond, F., Lussier, B., Dugas, F., Charbonneau, M., Croteau, F., Kennedy, C. ve Berryman, N. (2018). Using portable force plates to assess vertical jump performance: A metrological appraisal. Sports, 6(4), 149.
  53. Ridwan, M., Lan, M. F., Fauzi, M. ve Weeratunga, K. (2017). Development and validation of a force platform to measure ground reaction forces of national athletes. Paper presented at the 2017 12th IEEE Conference on Industrial Electronics and Applications (ICIEA).
  54. Rodriguez-Rosell, D., Pareja-Blanco, F., Aagaard, P. ve Gonzalez-Badillo, J. J. (2018). Physiological and methodological aspects of rate of force development assessment in human skeletal muscle. Clin Physiol Funct Imaging, 38(5), 743-762. doi:10.1111/cpf.12495
  55. Salaj, S. ve Markovic, G. (2011). Specificity of jumping, sprinting, and quick change-of-direction motor abilities. The Journal of Strength & Conditioning Research, 25(5), 1249-1255.
  56. Samozino, P., Morin, J.-B., Hintzy, F. ve Belli, A. (2008). A simple method for measuring force, velocity and power output during squat jump. Journal of Biomechanics, 41(14), 2940-2945.
  57. Silva, M. G., Moreira, P. V. S. ve Rocha, H. M. (2017). Development of a low cost force platform for biomechanical parameters analysis. Research on Biomedical Engineering, 33(3), 259-268. doi:10.1590/2446-4740.01217
  58. Souza, A. A., Bottaro, M., Rocha, V. A., Lage, V., Tufano, J. J. ve Vieira, A. (2020). Reliability and test-retest agreement of mechanical variables obtained during countermovement jump. Int J Exerc Sci, 13(4), 6-17.
  59. Suchomel, T. J., Techmanski, B. S., Kissick, C. R. ve Comfort, P. (2023). Reliability, validity, and comparison of barbell velocity measurement devices during the jump shrug and hang high pull. Journal of Functional Morphology and Kinesiology, 8(1), 35.
  60. Thomas, C., Dos’Santos, T., Comfort, P. ve Jones, P. A. (2017). Between-session reliability of common strength- and power-related measures in adolescent athletes. Sports, 5(1), 15.
  61. Thompson, S. W., Rogerson, D., Dorrell, H. F., Ruddock, A. ve Barnes, A. (2020). The Reliability and validity of current technologies for measuring barbell velocity in the free-weight back squat and power clean. Sports, 8(7), 94.
  62. Ulupınar, S. ve İnce, İ. (2021). Prediction of competition performance via commonly used strength-power tests in junior female weightlifters. Isokinetics and Exercise Science, 29(3), 309-317.
  63. Ulupınar, S. ve İzzet, İ. (2021). Spor Bilimlerinde etki büyüklüğü ve alternatif istatistik yaklaşımları. Spormetre Beden Eğitimi ve Spor Bilimleri Dergisi, 19(1), 1-17.
  64. Weyand, P. G., Sandell, R. F., Prime, D. N. ve Bundle, M. W. (2010). The biological limits to running speed are imposed from the ground up. Journal of Applied Physiology, 108(4), 950-961.
  65. Celik, H., Yildirim, A., Unver, E., Mavili, C., Yilmaz, E., Ozturk, F.,. Alpan Cinemre, S. (2023). Force-time analysis of the drop jump: reliability of jump measures and calculation methods for measuring jump height. Measurement in Physical Education and Exercise Science, 1-14.
  66. Çelik, H., Mavili, C., Yılmaz, E., Ünver, E., Öztürk, F., Bulut, S.,. Cinemre, Ş. A. (2023). Genç basketbol oyuncularında izometrik orta uyluk çekme testinin güvenirliği. Spor Bilimleri Dergisi, 34(2), 59-70. doi:10.17644/sbd.1180205
  67. Królikowska, A., Mika, A., Plaskota, B., Daszkiewicz, M., Kentel, M., Kołcz, A.,. Reichert, P. (2022). Reliability and validity of the athletic shoulder (ASH) test performed using portable isometric-based strength training device. Biology, 11(4), 577.
  68. Lindberg, K., Solberg, P., Bjørnsen, T., Helland, C., Rønnestad, B., Thorsen Frank, M.,. Paulsen, G. (2022). Strength and power testing of athletes: a multicenter study of test–retest reliability. International journal of Sports Physiology and Performance, 17(7), 1103-1110. doi:10.1123/ijspp.2021-0558
  69. Merrigan, J. J., Strang, A., Eckerle, J., Mackowski, N., Hierholzer, K., Ray, N. T.,. Briggs, R. A. (2024). Countermovement Jump Force-Time Curve Analyses: Reliability and Comparability Across Force Plate Systems. The Journal of Strength & Conditioning Research, 2024, 38.1: 30-37.