KaydedilenlerDerginizi ekleyin

Dergiler / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2026 / Cilt: 31 Sayı: 6

İnşaat sektöründe iş sağlığı ve güvenliğinde IoT uygulamaları: Bibliyometrik, görsel ve yöntem analizleri

IoT applications in occupational health and safety in the construction industry: Bibliometric, visual, and methods analyses

Şerife Ak(AFYON KOCATEPE UNIVERSITY)
Sayfa
1019–1035
Yayın Tarihi
2025-11-13
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Araştırmacıların literatürdeki önemli değişiklikleri ve eğilimleri fark etmelerine katkı sağlayacaktır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Nesnelerin interneti (IoT) teknolojinin günlük yaşama entegre edilmesinde kullanılan önemli yöntemlerden biri haline gelmiştir.
📊
Temel Bulgular & Veri:Çalışmaya Web of Science (WoS) veri tabanından 72, Scopus veri tabanından 8 adet olmak üzere toplam 80 makale dâhil edilmiştir.
💡
Sonuç & Katkı:Araştırmacıların literatürdeki önemli değişiklikleri ve eğilimleri fark etmelerine katkı sağlayacaktır.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:8 adet
⚙️Değişkenler:Nesnelerin İnterneti · IoT · İş Sağlığı ve Güvenliği

Özet

Nesnelerin interneti (IoT) teknolojinin günlük yaşama entegre edilmesinde kullanılan önemli yöntemlerden biri haline gelmiştir. IoT’un gelişen uygulama alanlarından biri de inşaat sektörüdür. İnşaat sektöründe halen güncel ve gelişime açık konulardan biri de iş sağlığı ve güvenliğidir (İSG). Dolayısıyla bu çalışma inşaat sektöründe giderek büyüyen bir araştırma alanı olan IoT teknolojisinin İSG alanındaki uygulamaların bir haritasını sunmayı amaçlamaktadır. Çalışmaya Web of Science (WoS) veri tabanından 72, Scopus veri tabanından 8 adet olmak üzere toplam 80 makale dâhil edilmiştir. Toplanan verilerin bibliyometrik analizinde, metin madenciliğinde ve görsel haritaların oluşturulmasında Bibliometrix ve Vosviewer araçları kullanılmıştır. Ayrıca incelenen yayınlar, kullanılan yöntemler bakımından kategorilere ayrılarak analiz edilmiştir. Çalışma, mevcut gündemin niş temalarda belirlenen anahtar kelimelerin motor temalarda belirlenen anahtar kelimeler ile birleştirilerek genişletilmesi gerektiği sonucunu ortaya çıkarmıştır. Bu çalışma, alandaki araştırmalarla ve yeniliklerle ilgilenen araştırmacılara güncel bir özet sunmaktadır. Araştırmacıların literatürdeki önemli değişiklikleri ve eğilimleri fark etmelerine katkı sağlayacaktır.

Abstract

The Internet of Things (IoT) has become an indispensable methodology for integrating technology into the fabric of daily life. The construction industry is one of the emerging application areas of the IoT. In the construction industry context, occupational health and safety (OHS) represents a critical and developing IoT application area. Consequently, the objective of this study is to present a map of the applications of IoT technology in the OHS field, a rapidly developing research area within the construction industry. A total of 80 publications were included in the study, comprising 72 from the Web of Science (WoS) database and 8 from the Scopus database. The bibliometric analysis of the collected data, text mining, and the creation of visual maps were conducted using the Bibliometrix and VOSviewer tools. The reviewed publications were also analyzed by categorizing them according to the methods employed. The study revealed that the current agenda should be expanded by combining the keywords identified in niche themes with the keywords identified in motor themes. This study offers a comprehensive and up-to-date overview for researchers interested in research and innovations. The study will facilitate identifying essential changes and trends in the literature for researchers.

🔖

Bu Makaleye Atıf Yap

Ak, Ş. (2025). İnşaat sektöründe iş sağlığı ve güvenliğinde IoT uygulamaları: Bibliyometrik, görsel ve yöntem analizleri. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 31 Sayı: 6, 1019–1035. https://doi.org/10.5505/pajes.2025.43678

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (113)

  1. McDonald MA, Lipscomb HJ, Bondy J, Glazner J. “’Safety is everyone’s job’: The key to safety on a large university construction site”. Journal of Safety Research, 40(1), 53-61, 2009. doi:10.1016/j.jsr.2008.12.005
  2. Rozenfeld O, Sacks R, Rosenfeld Y. “‘CHASTE’: construction hazard assessment with spatial and temporal exposure”. Construction Management and Economics, 27(7), 625-638, 2009. doi:10.1080/01446190903002771
  3. Gibb A, Haslam R, Gyi D, Hide S, Duff R. “What causes accidents?” Proceedings of the Institution of Civil Engineers: Civil Engineering, 159(2 SPEC. ISS.), 46-50, 2006. doi:10.1680/cien.159.6.46
  4. Haslam RA, Hide SA, Gibb AGF, Gyi DE, Pavitt T, Atkinson S, Duff AR. “Contributing factors in construction accidents”. Applied Ergonomics, 36(4), 401-415, 2005. doi:10.1016/j.apergo.2004.12.002
  5. Oke AE, Arowoiya VA, Akomolafe OT. “Influence of the internet of things’ application on construction project performance”. International Journal of Construction Management, 22(13), 2517-2527, 2022. doi:10.1080/15623599.2020.1807731
  6. Thibaud M, Chi H, Zhou W, Piramuthu S. “Internet of things (IoT) in high-risk environment, health and safety (EHS) industries: A comprehensive review”. Decision Support Systems. 108, 79-95, 2018. doi:10.1016/j.dss.2018.02.005
  7. Uygunoğlu T, Topçu İ. “Nesnelerin internetinin (IoT) inşaat mühendisliğindeki rolü: RFID, uygulamaları”. International Journal of 3D Printing Technologies and Digital Industry, 4, 270-277, 2020. doi:10.46519/ij3dptdi.797659
  8. Gündüz MZ, Daş R. “Nesnelerin interneti: Gelişimi, bileşenleri ve uygulama alanları”, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 24(2), 327-335, 2018.
  9. Wu F, Wu T, Yuce MR. “An Internet-of-things (IoT) network system for connected safety and health monitoring applications”. Sensors, 19(1), 1-21, 2019. doi:10.3390/s19010021
  10. Khalil EA, Özdemir S. “Nesnelerin internetine genel bir bakış: Kavram, özellikler, zorluklar ve fırsatlar”, Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 24(2), 311-326, 2018.
  11. Kanan R, Elhassan O, Bensalem R. “An IoT-based autonomous system for workers’ safety in construction sites with real-time alarming, monitoring, and positioning strategies”. Automation in Construction, 88, 73-86, 2018. doi:10.1016/j.autcon.2017.12.033
  12. Yang X, Yu Y, Shirowzhan S, Sepasgozer S, Li H. “Automated PPE-tool pair check system for construction safety using smart IoT”. Journal of Building Engineering, 32, 1-12, 2020. doi:10.1016/j.jobe.2020.101721
  13. Chung WWS, Tariq S, Mohandes SR, Zayed T. “IoT-based application for construction site safety monitoring”. International Journal of Construction Management, 23(1), 58-74, 2020. doi:10.1080/15623599.2020.1847405
  14. Okpala I, Nnaji C, Karakhan AA. “Utilizing emerging technologies for construction safety risk mitigation”. Practice Periodical on Structural Design and Construction, 25(2), 2020. doi:10.1061/(ASCE)SC.1943-5576.0000468
  15. Prabha D, Devi Meenakshi A, Darshini B, Soundariya K. “IoT application for safety and health monitoring system for construction workers”. 5th International Conference on Trends in Electronics and Informatics (ICOEI). Tirunelveli, India, 3-5 June 2021. doi:10.1109/ICOEI51242.2021.9452911
  16. Wang X, Liu C, Song X, Cui X. “Development of an internet-of-things-based technology system for construction safety hazard prevention”. Journal of Management in Engineering, 38(3), 2022. doi:10.1061/(ASCE)ME.1943-5479.0001035
  17. Zhang M, Ghodrati N, Poshdar M, Seet BC, Yongchareon S. “A construction accident prevention system based on the internet of things (IoT)”. Safety Science, 159, 1-14, 2023. doi:10.1016/j.ssci.2022.106012
  18. Yuan H, Yang H, Li R, Wang J, Tian L. “Personal safety monitoring system of electric power construction site based on AIoT technology”. Journal of Intelligent & Fuzzy Systems, 46(1), 493-504, 2024. doi:10.3233/JIFS-235087
  19. Häikiö J, Kallio J, Mäkelä SM, Keränen J. “IoT-based safety monitoring from the perspective of construction site workers”. International Journal of Occupational and Environmental Safety, 4(1), 1-14, 2020. doi:10.24840/2184-0954_004.001_0001
  20. Tabatabaee S, Mohandes SR, Ahmed RR, Mahdiyar A, Arashpour M, Zayed T, Ismail S. “Investigating the barriers to applying the internet-of-things-based technologies to construction site safety management”. International Journal of Environmental Research and Public Health, 19(2), 868, 2022. doi:10.3390/ijerph19020868
  21. Waqar A, Khan MB, Shafiq N, Skrzypkowski K, Zagórski K, Zagórska A. “Assessment of challenges to the adoption of IoT for the safety management of small construction projects in Malaysia: Structural equation modeling approach”. Applied Sciences, 13(5), 1-24, 2023. doi:10.3390/app1305334
  22. Page MJ, McKenzie JE, Bossuyt PM, Boutron I, Hoffmann TC, Mulrow CD, Shamseer L, Tetzlaff JM, Akl EA, Brennan SE et al. “The PRISMA 2020 statement: an updated guideline for reporting systematic reviews”. BMJ, 372 (n71), 1-9, 2021. doi:10.1136/bmj.n71
  23. Kumpulainen M, Seppänen M. “Combining Web of Science and Scopus datasets in citation-based literature study”. Scientometrics, 127(10), 5613-5631, 2022. doi:10.1007/s11192-022-04475-7
  24. Knobloch K, Yoon U, Vogt PM. “Preferred reporting items for systematic reviews and meta-analyses (PRISMA) statement and publication bias”. Journal of Cranio-Maxillofacial Surgery, 39(2), 91-92, 2011. doi:10.1016/j.jcms.2010.11.001
  25. Moher D, Shamseer L, Clarke M, Ghersi D, Liberati A, Petticrew M, Shekelle P, Stewart LA. “Preferred reporting items for systematic review and meta-analysis protocols (PRISMA-P) 2015 statement”. Systematic reviews, 4(1), 1. 2015. doi:10.1186/2046-4053-4-1
  26. Toews LC. “Compliance of systematic reviews in veterinary journals with preferred reporting items for systematic reviews and meta-analysis (PRISMA) literature search reporting guidelines”. Journal of the Medical Library Association: JMLA, 105(3), 233-239, 2017. doi:10.5195/jmla.2017.246
  27. Dobrucali E, Sadikoglu E, Demirkesen S, Zhang C, Tezel A, Kiral IA. “A bibliometric analysis of digital technologies use in construction health and safety”. Engineering, Construction and Architectural Management, 2023. doi:10.1108/ECAM-08-2022-0798
  28. Machete R, Neves M, Ponte M, Falcão AP, Bento R. “A BIM-based model for structural health monitoring of the central body of the monserrate palace: A first approach”. Buildings, 13(6), 2023. doi:10.3390/buildings13061532
  29. Okonkwo C, Okpala I, Awolusi I, Nnaji C. “Overcoming barriers to smart safety management system implementation in the construction industry”. Results in Engineering, 20, 2023. doi:10.1016/j.rineng.2023.101503
  30. Zabielski J, Srokosz P. “Monitoring of structural safety of buildings using wireless network of mems sensors”. Buildings, 10(11), 1-14, 2020. doi:10.3390/buildings10110193
  31. Liu Z, Gong S, Tan Z, Demian P. “Immersive technologies-driven building information modeling (BIM) in the context of metaverse”. Buildings, 13(6), 1559, 2023. doi:10.3390/buildings13061559
  32. Babalola A, Urhal P, Manu P, Da Silva Bartolo PJ, Cheung C, Yunusa-Kaltungo A, Perera S, Gao S, Francis V, Paton-Cole V. A systematic review of internet of things applications in construction occupational safety and health management. Editors: Manu P, Gao S, Da Siva Bartolo PJ, Francis V, Sawhney A. Handbook of Construction Safety, Health and Well-Being in the Industry 4.0 Era. 283-295 Routledge, Taylor & Francis Group, 2023.
  33. Prabhakar VV, Belarmin Xavier CS, Abubeker KM. “A Review on challenges and solutions in the implementation of AI, IoT and blockchain in construction industry”. Materials Today: Proceedings, 2023. doi:10.1016/j.matpr.2023.03.535
  34. Bukar UA, Sayeed MS, Razak SFA, Yogarayan S, Amodu OA, Mahmood RAR. “A method for analyzing text using VOSviewer”. MethodsX, 11, 102339, 2023. doi:10.1016/j.mex.2023.102339
  35. Chen X, Chen J, Wu D, Xie Y, Li J. “Mapping the research trends by co-word analysis based on keywords from funded project”. Procedia Computer Science, 91, 547-555, 2016. doi:10.1016/j.procs.2016.07.140
  36. van Eck NJ, Waltman L. “Citation-based clustering of publications using CitNetExplorer and VOSviewer”. Scientometrics, 111(2), 1053-1070, 2017. doi:10.1007/s11192-017-2300-7
  37. Martinez P, Al-Hussein M, Ahmad R. “A scientometric analysis and critical review of computer vision applications for construction”. Automation in Construction, 107, 102947, 2019. doi:10.1016/j.autcon.2019.102947
  38. Agbo FJ, Oyelere SS, Suhonen J, Tukiainen M. “Scientific production and thematic breakthroughs in smart learning environments: a bibliometric analysis”. Smart Learning Environments, 8(1), 1, 2021. doi:10.1186/s40561-020-00145-4
  39. Koçyı̇ğı̇t SÇ, Çı̇lhoroz İA, Çelı̇k G, Günenç EÖ. “Bibliometric mapping of studies on green accounting in health”. Journal of Mehmet Akif Ersoy University Economics and Administrative Sciences Faculty, 10(2), 1627-1645, 2023. doi:10.30798/makuiibf.1282690
  40. Forliano C, De Bernardi P, Yahiaoui D. “Entrepreneurial universities: A bibliometric analysis within the business and management domains”. Technological Forecasting and Social Change, 165, 120522, 2021. doi:10.1016/j.techfore.2020.120522
  41. Lamhour O, Safaa L, Perkumienė D. “What does the concept of resilience in tourism mean in the time of COVID-19? results of a bibliometric analysis”. Sustainability, 15(12), 9797, 2023. doi:10.3390/su15129797
  42. Song KS, Lim JG, Lee DG, Kwon DS. “Motion similarity-based safety hook fastening state recognition via deep siamese neural networks”. IEEE Sensors Letters, 7(10), 2023. doi:10.1109/LSENS.2023.3317759
  43. Rodrigues F, Antunes F, Matos R. “Safety plugins for risks prevention through design resourcing BIM”. Construction Innovation, 21(2), 244-258, 2020. doi:10.1108/CI-12-2019-0147
  44. Arslan M, Riaz Z, Kiani AK, Azhar S. “Real-time environmental monitoring, visualization and notification system for construction H&S management”. Journal of Information Technology in Construction, 19, 72-91, 2014.
  45. Vukićević AM, Mačužić I, Djapan M, Milićević V, Shamina L. “Digital training and advanced learning in occupational safety and health based on modern and affordable technologies”. Sustainability, 13(24), 13641, 2021. doi:10.3390/su132413641
  46. Kochovski P, Stankovski V. “Building applications for smart and safe construction with the DECENTER fog computing and brokerage platform”. Automation in Construction, 124, 103562, 2021. doi:10.1016/j.autcon.2021.103562
  47. Kumar GSA, Roy A, Singh R, Gehlot A, Iqbal MI, Akram SV. “A comprehensive approach to real-time site monitoring and risk assessment in construction settings using internet of things and artificial intelligence”. International Journal of Electrical and Electronics Engineering, 10(8), 112-126, 2023. doi:10.14445/23488379/IJEEEV10I8P111
  48. Mekruksavanich S, Jitpattanakul A. “Automatic recognition of construction worker activities using deep learning approaches and wearable inertial sensors”. Intelligent Automation & Soft Computing, 36(2), 2111-2128, 2023. doi:10.32604/iasc.2023.033542
  49. Moe SJS, Kim BW, Khan AN, Rongxu X, Tuan NA, Kim K, Kim DH. “Collaborative worker safety prediction mechanism using federated learning assisted edge intelligence in outdoor construction environment”. IEEE Access, 11, 109010-109026, 2023. doi:10.1109/ACCESS.2023.3320716
  50. Gomez-de-Gabriel JM, Fernandez-Madrigal JA, del Carmen Rey-Merchan M, Lopez-Arquillos A. “A safety system based on bluetooth low energy (BLE) to prevent the misuse of personal protection equipment (PPE) in construction”. Safety Science, 158, 2023. doi:10.1016/j.ssci.2022.105995
  51. Pedro A, Pham-Hang AT, Nguyen PT, Pham HC. “Data-driven construction safety information sharing system based on linked data, ontologies, and knowledge graph technologies”. International Journal of Environmental Research and Public Health, 19(2), 794, 2022. doi:10.3390/ijerph19020794
  52. Khan M, Khalid R, Anjum S, Tran SVT, Park C. “Fall prevention from scaffolding using computer vision and iot-based monitoring”. Journal of Construction Engineering and Management, 148(7), 2022. doi:10.1061/(ASCE)CO.1943-7862.0002278
  53. Kim JH, Jo BW, Jo JH, Lee YS, Kim DK. “Autonomous detection system for non-hard-hat use at construction sites using sensor technology”. Sustainability, 13(3), 1102, 2021. doi:10.3390/su13031102
  54. Zhou C, Luo H, Fang W, Wei R, Ding L. “Cyber-physical-system-based safety monitoring for blind hoisting with the internet of things: A case study”. Automation in Construction, 97,138-150, 2019. doi:10.1016/j.autcon.2018.10.017
  55. Kang Y, Yang S, Patterson P. “Modern cause and effect model by factors of root cause for accident prevention in small to medium sized enterprises”. Safety and Health at Work, 12(4), 505-510, 2021. doi:10.1016/j.shaw.2021.08.002
  56. Yeo CJ, Yu JH, Kang Y. “Quantifying the effectiveness of IoT technologies for accident prevention”. Journal of Management in Engineering, 36(5), 04020054, 2020. doi:10.1061/(ASCE)ME.1943-5479.0000825
  57. Guo X, Wang Y, Mei S, Shi C, Liu Y, Pan L, Li K, Zhang B, Wang J, Zhong Z, Dong M. “Monitoring and modelling of PM2.5 concentration at subway station construction based on IoT and LSTM algorithm optimization”. Journal of Cleaner Production, 360, 2022. doi:10.1016/j.jclepro.2022.132179
  58. Kwon JH, Kim EJ. “Accident prediction model using environmental sensors for industrial internet of things”. Sensors and Materials, 31(2), 579, 2019. doi:10.18494/SAM.2019.2162
  59. Arshad S, Akinade O, Bello S, Bilal M. “Computer vision and IoT research landscape for health and safety management on construction sites”. Journal of Building Engineering, 76, 2023. doi:10.1016/j.jobe.2023.107049
  60. Sorlini A, Maxia L, Patrucco M, Pira E. “Occupational safety and health improvements through innovative technologies in underground construction sites: main trends and some case histories”. Infrastructures, 8(6), 104, 2023. doi:10.3390/infrastructures8060104
  61. Yap JBH, Lee KPH, Wang C. “Safety enablers using emerging technologies in construction projects: empirical study in Malaysia”. Journal of Engineering, Design and Technology, 21(5), 1414-1440, 2021. doi:10.1108/JEDT07-2021-0379
  62. Yap JBH, Skitmore M, Lam CGY, Lee WP, Lew YL. “Advanced technologies for enhanced construction safety management: investigating Malaysian perspectives”. International Journal of Construction Management, 24(6), 633-642, 2022. doi:10.1080/15623599.2022.2135951
  63. Majumder S, Biswas D. “Construction safety and accident control measures in Industry 4.0 era: an overview”. International Journal of Advanced Operations Management, 13(4), 391-408, 2022. doi/10.1504/IJAOM.2021.120778
  64. Nnaji C, Awolusi I. “Critical success factors influencing wearable sensing device implementation in AEC industry”. Technology in Society, 66, 101636, 2021. doi:10.1016/j.techsoc.2021.101636
  65. Rey-Merchán M del C, Gómez-de-Gabriel JM, López-Arquillos A, Fernández-Madrigal JA. “Virtual fence system based on iot paradigm to prevent occupational accidents in the construction sector”. International Journal of Environmental Research and Public Health, 18(13), 6839, 2021. doi:10.3390/ijerph18136839
  66. Nnaji C, Awolusi I, Park J, Albert A. “Wearable sensing devices: towards the development of a personalized system for construction safety and health risk mitigation”. Sensors, 21(3), 2021. doi:10.3390/s21030682
  67. Edwards DJ, Rillie I, Chileshe N, Lai J, Hosseini MR, Thwala WD. “A field survey of hand–arm vibration exposure in the UK utilities sector. Engineering”. Construction and Architectural Management, 27(9), 2179-2198, 2020. doi:10.1108/ECAM-09-2019-0518
  68. Hire S, Sandbhor S, Ruikar K. “A conceptual framework for bim-based site safety practice”. Buildings, 14(1), 272, 2024. doi:10.3390/buildings14010272
  69. Khan M, Khalid R, Anjum S, Khan N, Cho S, Park C. “Tag and IoT based safety hook monitoring for prevention of falls from height”. Automation in Construction, 136, 2022. doi:10.1016/j.autcon.2022.104153
  70. Davila-Gonzalez S, Martin S. “Human digital twin in industry 5.0: A holistic approach to worker safety and well-being through advanced ai and emotional analytics”. Sensors, 24(2), 2024. doi:10.3390/s24020655
  71. Pistolesi F, Lazzerini B. “Assessing the risk of low back pain and injury via inertial and barometric sensors”. IEEE Transactions on Industrial Informatics, 16(11), 7199-7208, 2020. doi:10.1109/TII.2020.2992984
  72. Shafei H, Rahman RA, Lee YS. “Evaluating Construction 4.0 technologies in enhancing safety and health: case study of a national strategic plan”. Journal of Engineering, Design and Technology, 2024. doi:10.1108/JEDT-08-2023-0330
  73. Kochovski P, Stankovski V. “Supporting smart construction with dependable edge computing infrastructures and applications”. Automation in Construction, 85, 182-192, 2018. doi:10.1016/j.autcon.2017.10.008
  74. Wang F, Chen L. “Integrating digital art into a safety management platform for the construction industry through GIS and BIM in the internet of things context”. Computer-Aided Design and Applications, 21(S11), 1-13, 2024. doi:10.14733/cadaps.2024.S11.1-13
  75. Dąbrowska A, Kobus M, Sowiński P, Starzak Ł, Pękosławski B. “Integration of active clothing with a personal cooling system within the NGIoT architecture for the improved comfort of construction workers”. Applied Sciences, 14(2), 586, 2024. doi:10.3390/app14020586
  76. Sowinski P, Rachwal K, Danilenka A, Bogacka K, Dąbrowska A, Kobus M, Paszkiewicz A, Bolanowski M, Ganzha M, Paprzycki M. “Frugal heart rate correction method for scalable health and safety monitoring in construction sites”. Sensors, 23(14), 2023. doi:10.3390/s23146464
  77. Tsanousa A, Moschou C, Bektsis E, Vrochidis S, Kompatsiaris I. “Fusion of environmental sensors for occupancy detection in a real construction site”. Sensors, 23(23), 2023. doi:10.3390/s23239596
  78. Waqar A, Alharbi LA, Abdullah Alotaibi F, Othman I, Almujibah H. “Impediment to implementation of internet of things (IoT) for oil and gas construction project safety: Structural equation modeling approach”. Structures, 57, 2023. doi:10.1016/j.istruc.2023.105324
  79. Xu R, Kim BW, Moe SJS, Khan AN, Kim K, Kim DH. “Predictive worker safety assessment through on-site correspondence using multi-layer fuzzy logic in outdoor construction environments”. Heliyon, 9(9), e19408, 2023. doi:10.1016/j.heliyon.2023.e19408
  80. Danilenka A, Sowiński P, Rachwał K, Bogacka K, Dąbrowska A, Kobus M, Baszczyński K, Okrasa M, Olczak W, Dymarski P, Lacalle I, Ganzha M, Paprzycki M. “Real-time AI-driven fall detection method for occupational health and safety”. Electronics (Switzerland), 12(20), 2023. doi:10.3390/electronics12204257
  81. Kim K, Jeong I, Cho YK. “Signal processing and alert logic evaluation for IoT-based work zone Proximity Safety System”. Journal of Construction Engineering and Management, 149(2), 2023. doi:10.1061/JCEMD4.COENG12417
  82. Loo BPY, Wong RWM. “Towards a conceptual framework of using technology to support smart construction: The case of modular integrated construction (MiC)”. Buildings, 13(2), 2023. doi:10.3390/buildings13020372
  83. Ragnoli M, Colaiuda D, Leoni A, Ferri G, Barile G, Rotilio M, Laurini E, De Berardinis P, Stornelli V. “A LoRaWAN multi-technological architecture for construction site monitoring”. Sensors, 22(22), 2022. doi:10.3390/s22228685
  84. Li CHJ, Liang V, Chow YTH, Ng HY, Li SP. “A mixed reality-based platform towards human-cyber-physical systems with IoT wearable device for occupational safety and health training”. Applied Sciences-Basel, 12(23), 2022. doi:10.3390/app122312009
  85. Abbasianjahromi H, Ghazvini ES. “Developing a wearable device based on IoT to monitor the use of personal protective equipment in construction projects”. Iranian Journal of Science and Technology-Transactions of Civil Engineering, 46(3), 2561-2573, 2022. doi:10.1007/s40996-021-00716-6
  86. Liang Y, Liu Q. “Early warning and real-time control of construction safety risk of underground engineering based on building information modeling and internet of things”. Neural Computing and Applications, 34(5), 3433-3442, 2022. doi:10.1007/s00521-021-05755-8
  87. Kumar GA, Roy A, Singh R, Gehlot A, Rashid M, Akram SV, Alshamrani SS, Alshehri A, AlGhamdi AS. “Hybrid architecture based system for the establishment of sustainable environment in a construction site with 433 MHz LoRa and 2.4 GHz Zigbee”. Sustainability, 14(10), 2022. doi:10.3390/su14106280
  88. Mäkela SM, Lämsä A, Keränen JS, Liikka J, Ronkainen J, Peltola J, Häikiö J, Järvinen S, López MB. “Introducing VTTConIot: A realistic dataset for activity recognition of construction workers using IMU devices”. Sustainability, 14(1), 220, 2022. doi:10.3390/su14010220
  89. Ding L, Jiang W, Zhou C. “IoT sensor-based BIM system for smart safety barriers of hazardous energy in petrochemical construction”. Frontiers of Engineering Management, 9(1), 1-15, 2022. doi:10.1007/s42524-021-0160-6
  90. Arun Kumar GS, Singh R, Gehlot A, Akram SV. “LoRa enabled real-time monitoring of workers in building construction site”. International Journal of Electrical and Electronics Research, 10(1), 41-50, 2022. doi:10.37391/ijeer.100106
  91. del Carmen Rey-Merchan M, Lopez-Arquillos A, Manuel Soto-Hidalgo J. “Prevention of falls from heights in construction using an IoT system based on fuzzy markup language and JFML”. Applied Sciences-Basel, 12(12), 2022. doi:10.3390/app12126057
  92. Martinez-Rojas M, Gacto MJ, Vitiello A, Acampora G, Soto-Hidalgo JM. “An internet of things and fuzzy markup language based approach to prevent the risk of falling object accidents in the execution phase of construction projects”. Sensors, 21(19), 2021. doi:10.3390/s21196461
  93. Marquez-Sanchez S, Campero-Jurado I, Robles-Camarillo D, Rodriguez S, Corchado-Rodriguez JM. “BeSafe B2.0 smart multisensory platform for safety in workplaces”. Sensors, 21(10), 2021. doi:10.3390/s21103372
  94. Abbasianja H, Shadhy V, Beykian A. “Developing a smart helmet based on the internet of things to manage hearing problems in the construction projects”. Journal of Construction in Developing Countries, 26, 231-250, 2021. doi:10.21315/jcdc2021.26.2.11
  95. Li X, Chi HL, Lu W, Xue F, Zeng J, Li CZ. “Federated transfer learning enabled smart work packaging for preserving personal image information of construction worker”. Automation in Construction, 128, 2021. doi:10.1016/j.autcon.2021.103738
  96. Song H, Yu H, Xiao D, Li Y. “Real-time warning model of highway engineering construction safety based on internet of things”. Advances in Civil Engineering, 2021;2021. doi:10.1155/2021/6696014
  97. Teizer J, Neve H, Li H, Wandahl S, König J, Ochner B, König M, Lerche J. “Construction resource efficiency improvement by long range wide area network tracking and monitoring”. Automation in Construction, 116, 103245, 2020. doi:10.1016/j.autcon.2020.103245
  98. Kim JH, Jo BW, Jo JH, Kim DK. “Development of an IoT-based construction worker physiological data monitoring platform at high temperatures”. Sensors, 2020;20(19):5682. doi:10.3390/s20195682
  99. Jin R, Zhang H, Liu D, Yan X. “IoT-based detecting, locating and alarming of unauthorized intrusion on construction sites”. Automation in Construction, 118, 2020. doi:10.1016/j.autcon.2020.103278
  100. Srinivas TAS, Manivannan SSM. “Preventing collaborative black hole attack in IoT construction using a CBHA–AODV routing protocol”. International Journal of Grid and High Performance Computing (IJGHPC), 12(2), 25-46, 2020. doi:10.4018/IJGHPC.2020040102
  101. Costin A, Wehle A, Adibfar A. “Leading indicators-a conceptual IoT-based framework to produce active leading indicators for construction safety”. Safety, 5(4), 86, 2019. doi:10.3390/safety5040086
  102. Gómez-de-Gabriel JM, Fernández-Madrigal JA, López- Arquillos A, Rubio-Romero JC. “Monitoring harness use in construction with BLE beacons”. Measurement, 131, 329-340, 2019. doi:10.1016/j.measurement.2018.07.093
  103. Zhang H, Yan X, Li H, Jin R, Fu H. “Real-time alarming, monitoring, and locating for non-hard-hat use in construction”. Journal of Construction Engineering and Management, 145(3), 2019. doi:10.1061/(ASCE)CO.1943-7862.0001629
  104. Cheung WF, Lin TH, Lin YC. “A real-time construction safety monitoring system for hazardous gas integrating wireless sensor network and building information modeling technologies”. Sensors, 18(2), 2018. doi:10.3390/s18020436
  105. Yang O. “Improved locating algorithm of railway tunnel personnel based on collaborative information fusion in internet of things”. Transactions of the Institute of Measurement and Control, 39(4), 446-454, 2017. doi:10.1177/0142331217690219
  106. Zhou C, Ding LY. “Safety barrier warning system for underground construction sites using internet-of-things technologies”. Automation in Construction, 83, 372-389, 2017. doi:10.1016/j.autcon.2017.07.005
  107. Cheng H, Wu N, Lian J. “The management and monitor system of tunnel construction based on internet of things”. Proceedings of the Second International Conference on Mechatronics and Automatic Control, 334, 1019-1026, 2015. doi:10.1007/978-3-319-13707-0_112
  108. Zhong D, Lv H, Han J, Wei Q. “A practical application combining wireless sensor networks and internet of things: Safety management system for tower crane groups”. Sensors, 14(8), 13794-13814, 2014. doi:10.3390/s140813794
  109. Ding L, Zhou C, Deng Q, Luo HB, Ye XW, Ni YQ, Guo P. “Real-time safety early warning system for cross passage construction in Yangtze Riverbed Metro Tunnel based on the internet of things”. Automation in Construction, 36, 25-37, 2013. doi:10.1016/j.autcon.2013.08.017
  110. Collado-Mariscal D, Cortés-Pérez JP, Cortés-Pérez A, Cuevas-Murillo A. “Proposal for the integration of the assessment and management of electrical risk from overhead power lines in BIM for road projects”. International Journal of Environmental Research and Public Health, 19(20), 13064.
  111. Perera S, Paton-Cole V, Gao S, Francis V, Urhal P, Manu P, Da Silva Bartolo PJ, Cheung C, Yunusa-Kaltungo A, Babalola A. “Artificial intelligence for occupational health and safety management in construction: A systematic review”. In: Manu P, Gao S, Da Siva Bartolo PJ, Francis V, Sawhney A (eds). Handbook of Construction Safety, Health and Well-Being in the Industry 4.0 Era. Routledge, Taylor & Francis Group, 154-168, 2023.
  112. Echchakoui S. “Why and how to merge Scopus and Web of Science during bibliometric analysis: the case of sales force literature from 1912 to 2019”. Journal of Marketing Analytics, 8(3), 165-184, 2020. doi:10.1057/s41270-020-00081-9
  113. Caputo A, Kargina M. “A user-friendly method to merge Scopus and Web of Science data during bibliometric analysis”. Journal of Marketing Analytics, 10(1), 82-88, 2022. doi:10.1057/s41270-021-00142-7