KaydedilenlerDerginizi ekleyin

Dergiler / European Mechanical Science / 2023 / Cilt: 7 Sayı: 4

Determination of effects of some alcohol blends on performance, emission, mechanical vibration and noise in diesel engines

Nurullah GÜLTEKİN
Halil Erdi GÜLCAN
Murat CİNİVİZ
Sayfa
259–267
Yayın Tarihi
2023-12-20
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

When the most important data output of the test results is evaluated; In tests with D75E10IB10DEE5 fuel, it was determined that smoke emissions were reduced by 24.6% and mechanical vibrations by 14.2% compared to standard diesel fuel at full load.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The use of alcohol-derived fuels produced from renewable resources is an effective method to reduce dependence on petroleum.
📊
Temel Bulgular & Veri:In this way, performance, emission, mechanical vibration and noise values can be improved in diesel engines.
💡
Sonuç & Katkı:When the most important data output of the test results is evaluated; In tests with D75E10IB10DEE5 fuel, it was determined that smoke emissions were reduced by 24.6% and mechanical vibrations by 14.2% compared to standard diesel fuel at full load.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Diesel engine · alcohol blends · performance

Abstract

The use of alcohol-derived fuels produced from renewable resources is an effective method to reduce dependence on petroleum. However, alcohols can improve the combustion process by changing the fuel chemistry. In this way, performance, emission, mechanical vibration and noise values can be improved in diesel engines. In this study; New fuel forms (D90E10, D90IB10, D80E10IB10, D77.5E10IB10DEE2.5, 75E10IB10DEE5) were formed by mixing ethanol, isobutanol and diethyl ether alcohols with diesel fuel in certain proportions. The fuels generated was used in experiments. The studies were conducted with four different loads (%25, 50, 75, and 100) at a constant speed (2800 rpm). The optimum fuel mixture was determined by examining the engine performance, exhaust emissions, mechanical vibrations and noise data obtained in the experiments. When the most important data output of the test results is evaluated; In tests with D75E10IB10DEE5 fuel, it was determined that smoke emissions were reduced by 24.6% and mechanical vibrations by 14.2% compared to standard diesel fuel at full load.

🔖

Bu Makaleye Atıf Yap

GÜLTEKİN, N., GÜLCAN, H. E., CİNİVİZ, M. (2023). Determination of effects of some alcohol blends on performance, emission, mechanical vibration and noise in diesel engines. European Mechanical Science, Cilt: 7 Sayı: 4, 259–267. https://ajindex.com/articles/1022519

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Gültekin, N., Mayda, M., & Kilit, M. (2017). Benzin ve Dizel Motorlarda Devir Sayısının Titreşime Olan Etkisinin İncelenmesi. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, 6(2), 39-43
  2. Gürbüz, H., & Demirtürk, S. (2020). Investigation of dual-fuel combustion by different port injection fuels (Neat Ethanol and E85) in a DE95 diesel/ethanol blend fueled compression ignition engine. Journal of Energy Resources Technology, 142(12), 122306
  3. Shafiee, S., & Topal, E. (2008, June). An overview of fossil fuel reserve depletion time. In 31st IAEE International Conference, Istanbul (pp. 18-20)
  4. Ediger, V. Ş. (2019). An integrated review and analysis of multi-energy transition from fossil fuels to renewables. Energy Procedia, 156, 2-6
  5. Cook, P. J. (2022). Resources and reserves in a carbon-constrained world. Mineral Economics, 35(3-4), 361-371
  6. Yang, Y., Liu, Z., Saydaliev, H. B., & Iqbal, S. (2022). Economic impact of crude oil supply disruption on social welfare losses and strategic petroleum reserves. Resources Policy, 77, 102689
  7. Gurbuz, H. (2020). The effect of H2 purity on the combustion, performance, emissions and energy costs in an SI engine. Thermal Science, 24(1 Part A), 37-49
  8. Cinar, C., Uyumaz, A., Solmaz, H., Sahin, F., Polat, S., & Yilmaz, E. (2015). Effects of intake air temperature on combustion, performance and emission characteristics of a HCCI engine fueled with the blends of 20% n-heptane and 80% isooctane fuels. Fuel Processing Technology, 130, 275-281
  9. Agarwal, A. K. (2007). Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines. Progress in energy and combustion science, 33(3), 233-271
  10. Vergel, O. A., Cárdenas, D., García-Contreras, R., & Mata, C. (2020). Bioethanol-Diesel Blends Used in Diesel Engines and Vehicles under Transient Operation. Bioethanol Technologies
  11. Örs, İ., Sarıkoç, S., Atabani, A. E., & Ünalan, S. (2019). Experimental investigation of effects on performance, emissions and combustion parameters of biodiesel–diesel–butanol blends in a direct-injection CI engine. Biofuels
  12. Örs, I., Sarıkoç, S., Atabani, A. E., Ünalan, S., & Akansu, S. O. (2018). The effects on performance, combustion and emission characteristics of DICI engine fuelled with TiO2 nanoparticles addition in diesel/biodiesel/n-butanol blends. Fuel, 234, 177-188
  13. Chao, M. R., Lin, T. C., Chao, H. R., Chang, F. H., & Chen, C. B. (2001). Effects of methanol-containing additive on e