Dergiler / Electrica / 2009 / Cilt: 9 Sayı: 2

DESIGN OF CDM-BASED CONTROLLER FOR INTEGRATING PUMPED TANK PROCESS, ITS COMPARATIVE SETPOINT TRACKING PERFORMANCE, AND DISTURBANCE REJECTION CAPABILITY

Sayfa
1003–1013
Yayın Tarihi
2010-10-25
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is concluded that if no overshoot together with a shorter settling time is required, the CDM-controlled system has advantageous performance, although the PI-controlled system yields about 61% faster response as a percentage of the CDM-controlled system.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Integrating processes are non-self regulating and very difficult to control.
📊
Temel Bulgular & Veri:Eventually, the performances of the PI and CDM controllers are compared.
💡
Sonuç & Katkı:It is concluded that if no overshoot together with a shorter settling time is required, the CDM-controlled system has advantageous performance, although the PI-controlled system yields about 61% faster response as a percentage of the CDM-controlled system.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Integrating processes are non-self regulating and very difficult to control. The pumped tank process is an example of such processes. In this paper, first of all, first order plus dead time (FOPDT) integrating model of the pumped tank process is obtained by a software called Loop-Pro Trainer. Next, the PI tuning values are computed using the internal model control (IMC) tuning correlations based on truncated (first-order) Taylor series approximation. Subsequently, a controller is designed using the coefficient diagram method (CDM). Eventually, the performances of the PI and CDM controllers are compared. It is concluded that if no overshoot together with a shorter settling time is required, the CDM-controlled system has advantageous performance, although the PI-controlled system yields about 61% faster response as a percentage of the CDM-controlled system.

Abstract

DESIGN OF CDM-BASED CONTROLLER FOR INTEGRATING PUMPED TANK PROCESS, ITS COMPARATIVE SETPOINT TRACKING PERFORMANCE, AND DISTURBANCE REJECTION CAPABILITY

🔖

Bu Makaleye Atıf Yap

IMAL, E. (2010). DESIGN OF CDM-BASED CONTROLLER FOR INTEGRATING PUMPED TANK PROCESS, ITS COMPARATIVE SETPOINT TRACKING PERFORMANCE, AND DISTURBANCE REJECTION CAPABILITY. Electrica, Cilt: 9 Sayı: 2, 1003–1013. https://ajindex.com/articles/1017601

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...