KaydedilenlerDerginizi ekleyin

Dergiler / Electrica / 2010 / Cilt: 10 Sayı: 1

IMPLEMENTATION OF DYNAMIC ANALYSIS OF SRM WITH MODIFIED POLE GEOMETRY

Yusuf OZOGLU
Sayfa
1197–1200
Yayın Tarihi
2012-01-20
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The comparison shows an improvement of 23.6 % in torque ripple and 18 % in efficiency which is in agreement with the results of static analysis

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:One solution to the high torque ripple problem of the switched reluctance motor is to modify its pole geometry.
📊
Temel Bulgular & Veri:In this study, dynamic analysis of conventional SRM and the modified SRM are made and their performance parameters are compared with each other.
💡
Sonuç & Katkı:The comparison shows an improvement of 23.6 % in torque ripple and 18 % in efficiency which is in agreement with the results of static analysis
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Torque Ripple · Switched Reluctance Motor · Pole Geometry

Abstract

One solution to the high torque ripple problem of the switched reluctance motor is to modify its pole geometry. To show how much this solution is effective, static field analyses are usually contended with. However, dynamic analyses of SRM are to be made to get a real model of SRM. In this study, dynamic analysis of conventional SRM and the modified SRM are made and their performance parameters are compared with each other. The comparison shows an improvement of 23.6 % in torque ripple and 18 % in efficiency which is in agreement with the results of static analysis

🔖

Bu Makaleye Atıf Yap

OZOGLU, Y. (2012). IMPLEMENTATION OF DYNAMIC ANALYSIS OF SRM WITH MODIFIED POLE GEOMETRY. Electrica, Cilt: 10 Sayı: 1, 1197–1200. https://ajindex.com/articles/1017529

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (5)

  1. Moallem, M., Ong, C.M., and Unnewehr, L.E.: Effect of Rotor Profiles on the Torque of a Switched Reluctance Motor, IEEE Trans. on Ind. App., Vol. 28, No. 2, 1992, pp 364-369.
  2. Ohdachi, Y., Kawase, Y., Miura, Y., Hayashi, Y.,. Optimum Design of Switched Reluctance Motors using Finite Element Analysis, IEEE Trans. on Magnetics., Vol. 33, No. 2, 1997 pp 2033-2036.
  3. Rochford, C., Kavanagh, R.C., Egan, M.G., and Murphy, J.M.D., Development of Smooth Torque in Switched Reluctance Motors Using Self-Learning Techniques, European Power Electronics, pp 14-19, 1993.
  4. Derdiyok A., Inanc N., Ozbulur, V., Ozoglu Y., Optimal Phase Current Profiling of SRM by Fuzzy Logic Controller to Minimize Torque Ripple, 12th IEEE-ISIC 97 Conf., Istanbul, TURKEY, pp.77-82, 1997.
  5. Yusuf Ozoglu, Muhammed Garip, Erkan Mese, Torque Reluctance Motors by Pole Tip Shapings, 10th International Power Electronics and Motion Control, EPE-PEMC 2002, Cavtat & Dubrovnic, Croatia, September, 9-11 2002. in Switched Miller, T. J. E., 1993. Switched Reluctance Motors and Their Control. Oxford University Press, Oxford. BIOGRAPHY Yusuf Ozoglu was born in Urgup, Turkey in 1967. He