KaydedilenlerDerginizi ekleyin

Dergiler / Electrica / 2017 / Cilt: 17 Sayı: 2

VERY SIMPLE AND ACCURATE COMPUTER-AIDED-DESIGN (CAD) MODELS DEVELOPED BY GENETIC PROGRAMMING FOR THE QUASI-STATIC ANALYSIS OF UNSHIELDED SUSPENDED AND INVERTED MICROSTRIP LINES

Celal YILDIZ
Hakan KISIOGLU
Sayfa
3303–3309
Yayın Tarihi
2017-07-27
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is observed that the accuracies of CAD models proposed in this paper are good enough for the most practical cases.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Very simple computer-aided-design (CAD) models are introduced to determine the characteristic parameters such as effective permittivities and characteristic impedances of unshielded suspended and inverted microstrip lines.
📊
Temel Bulgular & Veri:The design parameter ranges in this work are 2 ≤ εr2 ≤ 20, 0.5 ≤ w/b ≤ 10, 0.1 ≤ a/b ≤ 1.5, and the respective characteristic impedances of unshielded suspended and inverted microstrip lines are 28Ω ≤ Z0 ≤ 185Ω, and 24 Ω ≤ Z0 ≤ 159 Ω, respectively.
💡
Sonuç & Katkı:It is observed that the accuracies of CAD models proposed in this paper are good enough for the most practical cases.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Suspended and inverted microstrip · CAD models · Genetic programming

Abstract

Very simple computer-aided-design (CAD) models are introduced to determine the characteristic parameters such as effective permittivities and characteristic impedances of unshielded suspended and inverted microstrip lines. CAD models are determined with the use of the genetic programming (GP). The results of CAD models are compared with the results of quasi-static analysis, experimental works available in the literature and a commercial electromagnetic simulator. The comparison results clearly show that CAD models proposed in this work are in very good agreement with the simulation, theoretical and experimental results for the suspended and inverted microstrip lines. The design parameter ranges in this work are 2 ≤ εr2 ≤ 20, 0.5 ≤ w/b ≤ 10, 0.1 ≤ a/b ≤ 1.5, and the respective characteristic impedances of unshielded suspended and inverted microstrip lines are 28Ω ≤ Z0 ≤ 185Ω, and 24 Ω ≤ Z0 ≤ 159 Ω, respectively. It is observed that the accuracies of CAD models proposed in this paper are good enough for the most practical cases.

🔖

Bu Makaleye Atıf Yap

YILDIZ, C., KISIOGLU, H. (2017). VERY SIMPLE AND ACCURATE COMPUTER-AIDED-DESIGN (CAD) MODELS DEVELOPED BY GENETIC PROGRAMMING FOR THE QUASI-STATIC ANALYSIS OF UNSHIELDED SUSPENDED AND INVERTED MICROSTRIP LINES. Electrica, Cilt: 17 Sayı: 2, 3303–3309. https://ajindex.com/articles/1015636

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. S. M. Musa, M. N. O. Sadiku, “Quasi-TEM modeling of open suspended and inverted substrate microstrip lines”, International Journal of Research and Reviews in Computer Science, vol. 3, pp. 1421-1424, 2012
  2. P. Bhartia, I.J. Bahl, “Millimeter-wave engineering and applications”. Wiley, New York, 1984
  3. R. Tomar, Y. M. Antar, P. Bhartia, “Computer-aided design (CAD) of suspended –substrate microstrips: an overview”, International Journal of RF and Microwave Computer-Aided Engineering, vol. 15, pp. 44-55, 2005
  4. P. Pramanick, P. Bhartia, “Computer-aided design for millimeter wave finlines and suspended substrate microstrip lines”, IEEE Trans Microwave Theory Tech, vol. 33, pp. 1429-1434, 1985
  5. R.S. Tomar, P. Bhartia, “New quasi-static models for computer aided design of suspended and inverted microstrip lines”, IEEE Trans Microwave Theory Tech, vol. 35, pp. 453-457, 1987
  6. J. Svanica, “Analysis of multilayer microstrip lines by a conformal mapping method”, IEEE Trans Microwave Theory Tech, vol. 40, pp. 769-772, 1992
  7. J. Svanica, “A simple quasi-static determination of basic parameters of multilayer microstrip and coplanar waveguide”, IEEE Microwave Guided Wave Lett, vol. 2, pp. 385-387, 1992
  8. J. M. Schellenberg, “CAD models for suspended and inverted microstrip”, IEEE Trans Microwave Theory Tech, vol. 43, pp. 1247-1252, 1995
  9. C. Yildiz, O. Saracoglu, “Simples models based on neural networks for suspended and inverted microstrip lines”, Microwave Optical Tech Lett, vol. 39, pp. 383-389, 2003
  10. A. Baykasoğlu, H. Güllü, H. Çanakçı, L. Özbakır, “Prediction of compressive and tensile strength of limestone via genetic programming”, Expert Systems with Applications, vol. 35, pp. 111–123, 2008
  11. J. R. Koza, F. H. Bennett III, D. Andre, M. A. Keane, F. Dunlap, “Automated synthesis of analog electrical circuits by means of genetic programming”, IEEE Transactions on Evolutionary Computation, vol. 1, pp. 109-128, 1997
  12. L. S. Belisario, H. Pierreval, “Using genetic programming and simulation to learn how to dynamically adapt the number of cards in reactive pull systems”, Expert Systems with Applications, vol. 42, pp. 3129–3141, 2015
  13. A. K. Patnaik, P. K. Bhuyan, “Application of genetic programming clustering in defining LOS criteria of urban street in Indian context”, Travel Behaviour and Society, vol. 3, pp. 38–50, 2016
  14. H. Kişioğlu, C. Yıldız, “Sonlu genişlikte toprak düzlemine sahip eş düzlemli dalga kılavuzu için ye