Dergiler / Qualitative Studies / 2018 / Cilt: 13 Sayı: 2

INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS

Sayfa
57–67
Yayın Tarihi
2018-04-14
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The abrasion resistance of the aforementioned aggregates was compared with the abrasion resistance of aggregates with different properties used in previous studies.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Turkey has many types of aggregates that have different chemical and physical properties.
📊
Temel Bulgular & Veri:Waste aggregates or low-cost aggregates must be evaluated in the industry to benefit the environment.
💡
Sonuç & Katkı:The abrasion resistance of the aforementioned aggregates was compared with the abrasion resistance of aggregates with different properties used in previous studies.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Abrasion Resistance · Quartzitic · Natural Aggregate

Özet

Turkey has many types of aggregates that have different chemical and physical properties. Waste aggregates or low-cost aggregates must be evaluated in the industry to benefit the environment. Turkey has large water reserves. Therefore, the usability of natural aggregates, created by the sweeping of water in places like river beds, lakes, and coasts, in industrial areas such as construction and metallurgy should be investigated. Because these aggregates have a quartzitic characteristic, it is also believed that their strength will be high. In this study investigates the abrasion resistance of natural aggregates with quartzite characteristics obtained from river beds in the Mediterranean Region. This study aims to investigate the usability of these natural aggregates in concrete. For the usability of these quartzitic natural aggregates in concrete, it has been investigated whether they have the appropriate abrasion value conforming the relevant Turkish Standard. Thus, it is aimed to provide both an environmentally friendly production and economic gain. The present study was carried out experimentally using the Los Angeles test device for different test parameters. From this study, it has been concluded that these natural aggregates can be used for the production of concrete which has sufficient strength especially in terms of abrasion resistance. The abrasion resistance of the aforementioned aggregates was compared with the abrasion resistance of aggregates with different properties used in previous studies.

Abstract

Turkey has many types of aggregates that have different chemical and physical properties. Waste aggregates or low-cost aggregates must be evaluated in the industry to benefit the environment. Turkey has large water reserves. Therefore, the usability of natural aggregates, created by the sweeping of water in places like river beds, lakes, and coasts, in industrial areas such as construction and metallurgy should be investigated. Because these aggregates have a quartzitic characteristic, it is also believed that their strength will be high. In this study investigates the abrasion resistance of natural aggregates with quartzite characteristics obtained from river beds in the Mediterranean Region. This study aims to investigate the usability ofthese natural aggregates in concrete. For the usability of these quartzitic natural aggregates in concrete, it has been investigated whether they have the appropriate abrasion value conforming the relevant Turkish Standard. Thus, it is aimed to provide both an environmentally friendly production and economic gain. The present study was carried out experimentally using the Los Angeles test device for different test parameters. From this study, it has been concluded that these natural aggregates can be used for the production of concrete which has sufficient strength especially in terms of abrasion resistance. The abrasion resistance of the aforementioned aggregates was compared with the abrasion resistance of aggregates with different properties used in previous studies.

🔖

Bu Makaleye Atıf Yap

TUNC, E. T. (2018). INVESTIGATION OF THE ABRASION RESISTANCE OF THE QUARTZITIC NATURAL AGGREGATE FOR DIFFERENT TEST PARAMETERS. Qualitative Studies, Cilt: 13 Sayı: 2, 57–67. https://ajindex.com/articles/1004317

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Güner, M.S., (1999). Material Science–Building Materials and Concrete Technology. Bakanlar Medya, İstanbul, 18-65 (in Turkish)
  2. Kamanlı, M. and Balık, F.S., (2003). Concrete Technology. Atlas Yayıncılık, İstanbul, 13-35 (in Turkish)
  3. Simsek, O., (2000). Building Materials Cilt II. Ankara Üniversitesi Basımevi, Ankara, 26-58 (in Turkish)
  4. Güner, M.S., (1997). The Investigation of Utilization Possibility Rize-İyidere Agregates of Pit at The Concrete Product. Master Thesis, Gazi University, Ankara, 1-36 (in Turkish)
  5. Poitevin, P., (1999). Limestone aggregate concrete, usefulness and durability. Cement and Concrete Composites, 21, 89-97
  6. Tuğrul, E., (2015). The Investigation of Abrasion Resistance of Aggregates Under Different Conditions. Master Thesis, Firat University, Elazığ (in Turkish)
  7. Temiz, H., Binici, H., Bodur, M.N., and Kara, O., (2006). Engineering Properties of the Natural Aggregates in Kahramanmaraş. KSU Journal of Science and Engineering, 9(2), 61-65 (in Turkish)
  8. Alyamaç, K.E. and Tuğrul, E., (2014). A Durable, Eco-Friendly and Aesthetic Concrete Work: Marble Concrete. In 11th International Congress on Advances in Civil Engineering (ACE 2014) (Vol:50, pp:21-25)
  9. Tuğrul, E., (2017). Investigation of Abrasion Resistance of Alacakaya Cherry Marble. 8th International Advanced Technologies Symposium, (4158-4166),4012-4020
  10. Tuğrul Tunç, E., (2018). Determination of Los Angeles Abrasion Loss of the Basalt Aggregate Type of Elazığ Province. International Conference on Innovative Engineering Applications (CIEA-2018), (595-602)
  11. Postacıoğlu, B., (1987). Concrete (Aggregates, Concrete) Cilt II. Teknik Kitaplar Yayın Evi, İstanbul, 403 (in Turkish)
  12. Pul, S., (1994). Agrega Petrografik Yapısının Betonun Dayanım ve Akışkanlığı Üzerindeki Etkileri. Karadeniz Technical University, Master Thesis, Trabzon, 86s (in Turkish)
  13. Tunc, E.T., (2019). Recycling of marble waste: A review based on strength of concrete containing marble waste. Journal of environmental management, 231, 86-97,
  14. İpekoğlu, B., (1999). Quartz, Quartzite, Quartz Sand. İstanbul Maden İhracatçıları Birliği, Türkiye Endüstriyel Mineraller Envanteri, 102-106 (in Turkish)
  15. DPT Sekizinci Beş Yıllık Kalkınma Planı, (2001). Madencilik Özel İhtisas Komisyonu Raporu. Endüstriyel Hammaddeler Alt Komisyonu, Toprak Sanayii Hammaddeleri III (Kuvars kumu, Kuvarsit, Kuvars) Çalışma Grubu Raporu, Devle