Journals / Konya mühendislik bilimleri dergisi (Online) / 2020 / Cilt: 8 - Sayı: 3

Investigation of the Effects of Austenitizing Temperature on the Austempering Behavior of EN-GJS600-3 Spheroidal Graphite Cast Iron

ÖSTENİTLEME SICAKLIĞININ EN-GJS-600-3 KÜRESEL GRAFİTLİ DÖKME DEMİRİN ÖSTEMPERLENME DAVRANIŞINA ETKİLERİNİN ARAŞTIRILMASI

Pages
706–722
DOI
—

Abstract

The effect of austenitizing temperature on the austempering behavior of EN-GJS-600-3 (GGG-60) spheroidal graphite cast iron was investigated. 0.5% Cu alloyed EN-GJS-600-3 spheroidal graphite cast iron samples obtained from Y-blocks were subjected to four different austempering experiments as a combination of two different austenitizing (850 and 950°C) and two different austempering temperatures (290 and 320°C). Hardness measurements, tensile tests and microstructural examinations were performed after the austempering experiments. The samples austenitized at 950°C produced higher hardness, yield and tensile strength values as compared to the samples austenitized at 850°C. This observation was linked to the fact that as compared to 850°C austenitizing at 950°C provided both more carbon to dissolve in the austenite matrix and larger austenite grain size resulting in better austemperability.

Özet

Bu çalışmada östenitleme sıcaklığının EN-GJS-600-3 (GGG-60) küresel grafitli dökme demirinöstemperlenme davranışına etkisi araştırılmıştır. Y bloklarına dökülen % 0,5 Cu alaşımlı EN-GJS-600-3küresel grafitli dökme demirden çıkarılan numuneler kullanılarak iki farklı östenitleme sıcaklığı (850 ve950°C) ve iki farklı östemperleme sıcaklığının (290 ve 320°C) dört ayrı kombinasyonunda östemperlemedeneyleri yapılmıştır. Östemperleme deneyleri sonrası numunelerin sertlik ölçümleri, çekme testleri ve içyapı incelemeleri gerçekleştirilmiştir. Her iki östemperleme sıcaklığında da 950°C’de östenitlenmişnumunelerde 850°C’de östenitlenmiş numunelere göre daha yüksek sertlik, akma ve çekme dayanımıdeğerlerine ulaşılmıştır. Bu sonuçlar, 950°C’de yapılan östenitlemenin 850°C’ye göre östenit matris içindehem daha çok karbonun çözünmesini hem de östenitin daha iri taneli olmasını sağlayaraköstemperlenmeye daha elverişli östenit yapısı oluşturabilmesiyle ilişkilendirilmiştir.