Journals / JOURNAL OF ANATOLIAN ENVIRONMENTAL AND ANIMAL SCIENCES / 2019 / Cilt: 4 - Sayı: 4

The Effect of Cryogenic Application on Parallel Fiber Pressure Resistance of Thermowood-Treated Sorbus Torminalis

Kriyojenik İşlemin Thermowood Akçaağaç Yapraklı Üvez Odununda Liflere Paralel Basınç Direnci Üzerine Etkisi

Pages
684–687
DOI
—

Abstract

This study aimed to analyze the possible changes in the pressure resistance values parallel to the fibers(CS) by subjectingheat-treated wood to sub-zero temperatures. Within the scope of the study, test specimens were first prepared by applying thermowood heattreatment at 190 and 212 °C for 1 h to samples of wild service tree wood (Sorbus torminalis). Both the heat-treated samples along with untreatedcontrol samples were then kept at -80 °C for 6. 18 and 54 h to obtain the test specimens. When compared to the control samples. Test resultsshowed a difference in the parallel fiber pressure resistance of the heat-treated test specimens held at -80 °C and the values were seen as verypositive, especially with the 6-h and 18-h applications. The CS resistance values of the control samples and the heat treated samples as N/mm2at190 and 212 °C for 1 h were respectively 56.12, 69.28 and 62.12 for initial; 51.38, 73.25 and 80.55 for 6 h; 50.31, 72.82 and 75.66 for 18 h;55.85, 60.19 and 62.14 for 54 h.

Özet

Bu çalışmadaki amaç, ısıl işleme tabi tutulmuş odunda kriyojenik işlem uygulandıktan sonar liflere parallel basınç direncindeki olası değişimleri analiz etmektir. Bu kapsamda Akçaağaç yapraklı üvez odunu test örnekleri ilk olarak 190 ve 212°C sıcaklıklarda ısıl işleme tabi tutularak Thermowood paneller üretildi. Her iki gruptaki örnekler kontrol örnekleri ile birlikte sıfırın altında 80°C sıcaklıkta 6, 18 ve 54 saat süre işleme tabi tutuldu. Daha sonra gruplara liflere paralel basınç direnci testi uygulandı. testler uygulandıarasında karşılaştırma yapıldı. Test sonuçları özellikle 6 ve 18 saatlik kriyojenik uygulama yapılan test örneklerinde farklılıkların olduğunu göstermiştir. Liflere paralel basınç direnci kontrol, 190 ve 212°C Thermowood örneklerde sırası ile N/mm2 olmak üzere; 56.12, 69.28 ve 62.12 (başlangıç); 6 saat için 51.38, 73.25 ve 80.55; 18 saat için 50.31, 72.82 ve 75.6; 54 saat için 55.85, 60.19 ve 62.14 olarak belirlenmiştir.