Journals / Cumhuriyet Üniversitesi Fen-Edebiyat Fakültesi Fen Bilimleri Dergisi / 2017 / Cilt: 38 - Sayı: 2

Influence of Various Laser Surface Modifications on SBS of Titanium and Zirconium Oxide Substructures

Zirkonyum Oksit ve Titanyum Metal Alt Yapıların SBS Üzerine Farklı Lazer Yüzey Uygulamalarının Etkisi

Pages
245–255
DOI
—

Abstract

In prosthodontics, to increase the bonding of metals with porcelain by several means including laser surface treatments is still an important research topic. The current study was undertaken to evaluate the influence of surface treatment with Ho:YAG, Er:YAG, and Nd:YAG lasers on the shear bond strength (SBS) of low fusion dental porcelain to titanium and zirconium oxide substructures. Titanium (n=70) and zirconium oxide (n=70) specimens were categorized into 7 study groups (n=10): sandblasting, Er:YAG 1.5W and 2.5W, Nd:YAG 1.5W and 2.5W, and Ho:YAG 4W and 10W. Their surface morphology was examined with under scanning electron microscopy (SEM) after surface treatment. After application of low fusion dental porcelain, the SBS test was performed applying a universal testing machine. In the titanium specimens, the SBSs of the Nd:YAG laser 2.5W and 1.5W were significantly higher than those of the sandblasting and other lasers, respectively (p

Özet

Protetik diş tedavisinde lazer yüzey uygulamalarını da içeren birçok yöntem, porselen alt yapı ile metalin bağlantısını arttırmak için halen önemli bir araştırma konusudur. Çalışma; titanyum ve zirkonyum oksit alt yapılara uygulanan düşük ısı porseleninin makaslama bağlantı dayanımına (SBS); Ho:YAG, Er:YAG ve Nd:YAG lazer ile yüzey şartlandırmalarının etkisini geliştirmeyi amaçlamıştır. Titanyum (n=70) ve zirkonyum oksit (n=70) örnekler 7 çalışma grubuna ayrılmıştır (n=10): Kumlama, Er:YAG 1.5 W ve 2.5 W, Nd:YAG 1.5 W ve Er:YAG 2.5 W, ve Ho:YAG 4W VE 10 W. Yüzey morfolojileri, şartlandırma sonrasında taramalı elektron mikroskobu (SEM) altında incelenmiştir. Dental düşük ısı porseleninin uygulanmasından sonra SBS testi universal test makinesi kullanılarak yapılmıştır. Titanyum örneklerde Nd:YAG lazer 2.5 W ve 1.5 W SBS sırasıyla kumlama ve diğer lazerlerden önemli ölçüde yüksektir (p