Journals / Avrupa Bilim ve Teknoloji Dergisi / 2021 / Cilt: 0 - Sayı: 25

The Oxy-Fuel Combustion Power Plant Model with DesulphurizationProcess and The Effect of Different Types of Coal on OperatingParameters

Kükürt Giderme Prosesli Oksi-Yakıt Yanmalı Enerji Santrali Modeli ve Farklı Kömür Tiplerinin İşletme Parametrelerine Etkisi

Pages
636–643
DOI
—

Abstract

Clean coal technologies are defined as applications that improve environmental acceptability and efficiency in producing, preparingand using coal. With clean coal technologies, it is possible to increase the amount of energy obtained per unit ton by reducingemissions and wastes. However, today there are strict sanctions that must be followed due to the legal regulations on the protection ofthe environment and combating climate change. At this point, the clean coal-burning technologies in which the oxy-fuel combustionprocess (with the possibility of $CO_2$ storage) takes place come to the fore. In this study, the method of burning fuel with oxygen in athermal power plant with a gross electricity generation of 500 MW was discussed. This thermal power plant model also has afluidized bed dryer, a desulphurization plant, and a $CO_2$ storage process. The combustion results of different properties of coals wereexamined, and their effect on operating parameters was investigated.

Özet

Temiz kömür teknolojileri, kömürün üretimi, hazırlanması ve kullanımında çevresel kabul edilebilirliği ve verimliliği artıranuygulamalar olarak tanımlanmaktadır. Temiz kömür teknolojileri ile emisyon ve atıkları azaltarak birim ton başına elde edilecekenerji miktarını artırmak mümkündür. Bununla birlikte, günümüzde çevrenin korunması ve iklim değişikliğiyle mücadeleye ilişkinyasal düzenlemelerin bir sonucu olarak uyulması zorunlu katı yaptırımlar mevcuttur. Bu noktada özellikle oksi-yakıt yanma işleminin($CO_2$ depolama imkânı ile) yer aldığı "temiz kömür yakma teknolojileri" ön plana çıkmaktadır. Bu çalışmada, brüt elektrik üretimi500 MW olan bir termik santralde oksijen ile yakıt yakma yöntemi ele alınmıştır. Bu termik santral modelinde ayrıca bir akışkanyataklı kurutucu, bir desülfürizasyon tesisi ve bir $CO_2$ depolama prosesi bulunmaktadır. Farklı özellikteki kömürlerin yanma sonuçlarıincelenmiş ve işletme parametrelerine olan etkileri araştırılmıştır.