Journals / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2017 / Cilt: 7 - Sayı: 4
Gasification of Kenaf Hydrolysate and Optimization by Response Surface Methodology
- Pages
- 131–139
- DOI
- —
Abstract
In this study, the effect of temperature, feed flow rate and biomass feed concentration parameterson gasification performance of kenaf biomass hydrolysate using continuous atmospheric catalytic vapour phase(AVPR) reforming system was examined. The effect of experimental parameters on the composition of gas productswere investigated using the RSM (Response Surface Methodology) method. One of the greatest advantages of thismethod that makes it possible to study the effect of gasification efficiency on several experimental parameters bycarrying out a few experimental studies. The results showed that temperature was main factor on hydrogen-rich gasproduction while other parameters (biomass feed concentration, feed flow rate) were secondary. As a result of theoptimazition, it was observed that the temperature should be above 295 °C, and the flow rate of 0.30 mL / min forhigh yield hydrogen.
Özet
Bu çalışmada, kenaf hidrolizatının kesintisiz olarak atmosferik basınçta katalitik olarak buhar faz