Journals / Bartın Orman Fakültesi Dergisi / 2018 / Cilt: 20 - Sayı: 3

Improving the Fire Resistance of Heat Treated Wood by Using Environment-Friendly Substance

Çevre Dostu Madde Kullanılarak Isıl İşlemli Örneklerin Yanma Dirençlerinin İyileştirilmesi

Pages
519–524
DOI
—

Abstract

The greatest risk of wood structures with many advantages is there ignition and burning. Negative property of wood can be reduced by using environmentally friendly substance. In this study, pine (Pinus sylvestris L.) wood samples were heat-treated at 210 ° C for 120 minutes after impregnation with boric acid in concentrations of 2.5% and 5%. Fire performance of the combination of boric acid (BA) and heat treatment was calculated from maximum temperature and weight loss. According to Mini Fire Tube (MFT) test results, 99,99% weight loss was observed in the control samples, while 38,36% and 52,24% weight loss were observed in 5% BA and 5% BA+Heat treatment respectively. 2.5% BA+Heat treatment and 5% BA+Heat treatment samples reached maximum weight loss in 160 seconds. While the maximum temperature increased to 444,73 ºC in 5% BA impregnated samples, it remained at 227.9 ºC in 2.5% BA + heated samples.

Özet

Ahşap malzemelerin avantajlarının yanında en büyük dezavantajları alevlenmeleri ve yanmalarıdır. Odunun bu negatif özelliği çevre dostu maddeler kullanılarak azaltılabilir. Bu çalışmada, çam (Pinus sylvestris L.) odun örnekleri,% 2.5 ve % 5'lik konsantrasyonlarda borik asit ile emprenye edildikten sonra 120 dakika süreyle, 210 ° C'de ısıl işleme tabi tutulmuşlardır. Bor ve ısıl işlem kombinasyonunun odunun yanma performansı üzerine etkisi maksimum sıcaklık ve ağırlık kaybı üzerinden hesaplanmıştır. Mini Fire Tube (MFT) test sonuçlarına göre kontrol örneklerinde% 99,99 ağırlık kaybı gözlenirken, % 5 BA ve % 5 BA + Isıl işlemli örneklerde sırasıyla % 38,36 ve % 52,24 ağırlık kaybı gözlenmiştir. % 2,5 BA + Isıl işlem ve % 5 BA + Isıl işlemli örnekler 160 saniyede maksimum ağırlık kaybına ulaşmıştır. % 5 BA emprenyeli örneklerde maksimum sıcaklık 444,73 ºC'ye yükselirken,% 2.5 BA + Isıl işlemdeki maksimum sıcaklık 227,9 ºC’de kalmıştır.