SavedAdd your journal

Journals / International Journal Of Renewable Energy Research / 2013 / Cilt: 3 Sayı: 4

Solar Direct Torque Controlled Induction Motor Drive for Industrial Applications

AUROBINDA Panda
Mukesh kumar Pathak
Satya Prakash Srivastava
Pages
794–802
Publication Date
2013-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Simulation results show the effectiveness and feasibility of such an approach.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:With the continuous decrease of the cost of solar cells, there is an increasing interest in photovoltaic (PV) system applications.
📊
Key Findings & Data:The PV generator is forced to operate at its maximum power point (MPP) by using a fuzzy based maximum power point tracking algorithm.
💡
Conclusion & Impact:Simulation results show the effectiveness and feasibility of such an approach.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Photovoltaic · Maximum PowerPoint Tracking · Direct torque control

Abstract

With the continuous decrease of the cost of solar cells, there is an increasing interest in photovoltaic (PV) system applications. Electric motors powered by solar energy are one of the most important applications now-a-days, such as in water pumping systems, electric vehicles etc. This paper investigates a photovoltaic-electro mechanic chain, composed of a PV generator, an impedance adapter DC–DC converter, inverter and a direct torque controlled induction machine. The PV generator is forced to operate at its maximum power point (MPP) by using a fuzzy based maximum power point tracking algorithm. Induction motor performance is obtained at different irradiation and temperature conditions. Simulation results show the effectiveness and feasibility of such an approach.

🔖

Cite This Article

Panda, A., Pathak, M. K., Srivastava, S. P. (2013). Solar Direct Torque Controlled Induction Motor Drive for Industrial Applications. International Journal Of Renewable Energy Research, Cilt: 3 Sayı: 4, 794–802. https://ajindex.com/articles/996499

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. J. Holtz, “Pulse width modulation-a survey,” IEEE Trans. Ind. Electron.,vol. 38, no. 5, pp. 410-420, Oct. 1992.
  2. G. Juhasz, S. Halasz, and K. Veszpremi, “New aspects of a direct torque controlled induction motor drive,” in Proc. IEEE Int. Conf. Industrial Technology, Jan. 2000, pp. 43- 49.
  3. D. Casadei, G. Serra, and A. Tani, “Implementation of a direct torque control algorithm for induction motors based on discrete space vector modulation,” IEEE Trans. Power Electron., vol. 15, no. 4, pp. 769-777,Jul. 2000.
  4. T. G. Habetler, F. Profumo, M. Pastorelli, and M. Tolbert, “Direct torque control of induction machines using space vector modulation,” IEEE Trans. Ind. Application., vol. 28, no. 5, pp. 1045-1053, Sep./Oct. 1992.
  5. J.K. Kang and S.K. Sul, “New direct torque control of induction motor for minimum torque ripple and constant switching frequency,” IEEE Trans. Ind. Application., vol. 35, pp. 1076-1082, Sep./Oct. 1999.
  6. El Moucary, C.; Mendes, E.; Razek, A.;, "Decoupled direct control for PWM inverter-fed induction motor drives," IEEE Transactions on Industry Applications, vol.38, no.5, pp. 1307- 1315,Sep/Oct,2002.
  7. Idris, N.R.N.; Yatim, A.H.M.;, "Direct torque control of induction machines with constant switching frequency and reduced torque ripple," IEEE Transactions on Industrial Electronics, vol.51,no.4,pp.758-767,Aug.2004.
  8. Casadei, D.; Profumo, F.; Serra, G.; Tani, A.; "FOC and DTC: two viable schemes for induction motors torque control," IEEE Transactions on Power Electronics, vol.17, no.5, pp. 779- 787, Sep 2002
  9. Attaianese, C.; Perfetto, A.; Tomasso, G.;, "A space vector modulation algorithm for torque control of inverter fed induction motor drive," IEEE Transactions on Energy Conversion, vol.17, no.2, pp.222-228, Jun 2002 [10]
  10. Chattopadhyay, A.K., "Alternating Current Drives
  11. in the Steel Industry," IEEE Industrial Electronics
  12. Magazine, vol.4, no.4, pp.30-42, Dec. 2010
  13. El Moucary, C.; Mendes, E.; Razek, A.;, "Decoupled direct control for PWM inverter-fed induction motor drives," IEEE Transactions on Industry Applications, vol.38, no.5, pp. 1307- 1315,Sep/Oct,2002.
  14. Idris, N.R.N.; Yatim, A.H.M.;, "Direct torque control of induction machines with constant switching frequency and reduced torque ripple," IEEE Transactions on Industrial Electronics, vol.51,no.4,pp.758-767,Aug.2004.
  15. Casadei, D.; Profumo, F.; Serra, G.; Tani, A.; "FOC and DTC: two viable schemes for induction motors torque control," IEEE Transactions on Power Electronics, vol.17, no.5, pp. 779- 787, Sep 2002
  16. Attaianese, C.; Perfetto, A.; Tomasso, G.;, "A space vector modulation algorithm for torque control of inverter fed induction motor drive," IEEE Transactions on Energy Conversion, vol.17, no.2, pp.222-228, Jun 2002 [10]