Journals / Forestist / 2017 / Cilt: 67 Sayı: 2

Individual taper models for natural cedar and Taurus fir mixed stands of Bucak Region, Turkey

Bucak Yöresi doğal sedir ve Toros göknarı karışık meşcereleri için gövde çapı ve hacim modelleri

Journal
Forestist
Pages
243–261
Publication Date
2017-07-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Using individual-specific taper equations yields more robust estimations and, therefore, will enhance the prediction accuracy of diameters at different heights and volumes in mixed stands.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Abstract: In this study, we assessed the performance of different types of taper equations for predicting tree diameters at specific heights and total stem volumes for mixed stands of Taurus cedar (Cedrus libani A.
📊
Key Findings & Data:We used data from mixed stands containing a total of 131 cedar and 124 Taurus fir trees.
💡
Conclusion & Impact:Using individual-specific taper equations yields more robust estimations and, therefore, will enhance the prediction accuracy of diameters at different heights and volumes in mixed stands.
🔬Design:Modeling & Simulation
📍Scope:2000 Verileri
⚙️Variables:Karışık meşcere · Gövde çapı · ticari hacim

Abstract

Abstract: In this study, we assessed the performance of different types of taper equations for predicting tree diameters at specific heights and total stem volumes for mixed stands of Taurus cedar (Cedrus libani A. Rich.) and Taurus fir (Abies cilicica Carr.). We used data from mixed stands containing a total of 131 cedar and 124 Taurus fir trees. We evaluated six commonly used and well-known forestry taper functions developed by a variety of researchers (Biging (1984), Zakrzewski (1999), Muhairwe (1999), Fang et al. (2000), Kozak (2004), and Sharma and Zhang (2004)). To address problems related to autocorrelation and multicollinearity in the hierarchical data associated with the construction of taper models, we used appropriate statistical procedures for the model fitting. We compared model performances based on the analysis of three goodness-of-fit statistics and found the compatible segmented model of Fang et al. (2000) to be superior in describing the stem profile and stem volume of both tree species in mixed stands. The equation used by Zakrzewski (1999) exhibited the poorest fitting results of the three taper equations. In general, we found segmented taper equations to provide more accurate predictions than variable-form models for both tree species. Results from the non-linear extra sum of squares method indicate that stem tapers differ among tree species in mixed stands. Therefore, a different taper function should be used for each tree species in mixed stands in the Bucak district. Using individual-specific taper equations yields more robust estimations and, therefore, will enhance the prediction accuracy of diameters at different heights and volumes in mixed stands.

Özet

Özet: Çalışmada, Bucak Yöresi doğal karışık sedir (Cedrus libani A. Rich.) ve Toros göknarı (Abies cilicica Carr.) meşcereleri için gövde çapı modelleri geliştirilmiştir. Bu amaçla sedir ve Toros göknarı karışık meşcerelerinden, 131 adet sedir 124 adet Toros göknarı ölçülmüştür. Çalışmada, ormancılıkta yaygın olarak kullanılan Biging (1984), Zakrzewski (1999), Muhairwe (1999), Fang ve ark. (2000), Sharma ve Zhang (2004) ve Kozak (2004)’ın modelleri test edilmiştir. Modellerinin geliştirilmesinde, hiyerarşik verilerdeki çoklu bağıntı ve otokorelasyon problemlerini de dikkate alan uygun istatistiksel yöntemler kullanılmıştır. Geliştirilen gövde çapı denklemlerinin tahmin performanslarının değerlendirilmesinde, üç farklı ölçüt kullanılmıştır. Karışımdaki her iki tür için de, Fang ve ark. (2000) tarafından geliştirilen uyumlu gövde çapı modelinin, çap, ticari boy, ticari hacim ve toplam gövde hacmi tahminlerinde, diğer modellerden daha başarılı olduğu görülmüştür. Zakrzewski (1999)’nin modeli ise diğer modellerle karşılaştırıldığında, her iki tür için de en başarısız modeldir. Karışımı oluşturan sedir ve göknar türleri için ayrı gövde çapı ve hacim modeline ihtiyaç olup olmadığı F-testi ile ortaya konmuştur. Yapılan değerlendirmelerde, sedir ve göknar türleri için farklı çap ve hacim denklemlerinin kullanılması gerektiği ortaya çıkmıştır. Geliştirilen gövde çapı modelleri ile Bucak Yöresi karışık sedir ve göknar meşcerelerindeki ağaç türleri için daha doğru çap ve hacim tahminleri yapılabilmesi mümkündür. Anahtar Kelimeler: Parçalı model, uyumlu denklem, gövde formu, ticari hacim, otokorelasyon, F testiReceived (Geliş): 08.02.2017 - Revised (Düzeltme): 17.03.2017 - Accepted (Kabul): 28.04.2017

🔖

Cite This Article

Özçelik, R., Dirican, O. (2017). Individual taper models for natural cedar and Taurus fir mixed stands of Bucak Region, Turkey. Forestist, Cilt: 67 Sayı: 2, 243–261. https://ajindex.com/articles/990366

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Bates, D.M., Watts, D.G., 1988. Nonlinear regression analysis and its applications. Wiley, New York. Belsey, D.A., 1991. Conditioning diagnostics, collinearity and weak data in regression. Wiley, New York. Bielak, K., Dudzinska, M., Pretzsch, H., 2014. Mixed stands of Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L. Karst.) can be more productive than monocultures. Evidence from over 100 years of observation of long-term experiments. Forest Systems 23(3): 573-589.
  2. Biging, G.S., 1984. Taper equations for second-growth mixed conifers of northern California. Forest Science 30: 1103–1117.
  3. Brooks, J.R., Jiang, L., Özçelik, R., 2008. Compatible stem volume and taper equations for Brutian pine, Cedar of Lebanon, and Cilicica fir in Turkey. Forest Ecology and Management 256: 147-151, doi:10.1016/j.foreco.2008.04.018. Çalişkan, A., 1989. Relationships between growth and necessary silvicultural treatments of mixed stands of Scots pine (Pinus sylvestris L.), Fir (Abies bornmülleriana Matff.), and Beech (Fagus orientalis Lipsky) in Karabük Büyükdüz Research Forest, IU Graduate School of Natural and Applied Science, PhD. Thesis, 283 pp., [Turkish]. Castedo-Dorado, F., Gomez-Garcia, E., Dieguez-Aranda, U., Barrio-Anta, M., Crecente-Campo, F., 2012. Aboveground stand-level biomass estimation: a comparison of two methods for major forest species in northwest Spain. Annals of Forest Science 69: 735-746, doi: 10.1007/s13595-012-0191-6.
  4. Clark, III A., Souter, R.A. Schlaegel, B.E., 1991. Stem profile equations for southern tree species. United States Department of Agriculture Forest Service Research Paper, SE-282. Crecente-Campo, F., Alboreca, A. R., Dieguez – Aranda, U., 2009. A Merchantable volume system for Pinus sylvestris L. in the major mountain ranges of Spain. Annals of Forest Science 66:1-12, doi: 10.1051/forest/2009078. Corral-Rivas, J.J., Dieguez-Aranda, U., Corral-Rivas, S., Castedo-Dorado, F., 2007. A merchantable volume system for major pine species in El Salto, Durango (Mexico). Forest Ecology and Management 238:118-129, doi:10.1016/j.foreco.2006.09.074. de-Miguel, S., Mehtatalo, L., Shater, Z., Kraid, B., Pukkala, T., 2012. Evaluating marginal and conditional predictions of taper models in the absence of calibration data. Canadian Journal of Forest Research 42: 1383-1394, doi: 10.1139/x2012-090. Dieguez – Aranda, U., Castedo- Dorado, F., Alvarez-Gonzalez, J.G., Rojo, A., 2006. Compatible Taper Function for Scots Pine Plantations in Northwest