Journals / Forestist / 2018 / Cilt: 68 Sayı: 1

Surface glossiness properties of wood impregnated with some plant extracts

Bazı bitkisel ekstraktlar ile emprenye edilen ağaç malzemelerin yüzey parlaklık özellikleri

Journal
Forestist
Pages
61–69
Publication Date
2018-01-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

When the wood materials that impregnated with mimosa and quebracho extracts applied to polyurethane varnish, they can be maintained both durability and surface glossiness for a longer time.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Abstract: In this study, beech woods (Fagus orientalis L.) were subjected to coating process with polyurethane, cellulosic and water-based varnishes after impregnated with mimosa (Acacia mollissima) and quebracho (Shinopsis lorentzii) extracts at 5%, and 10% concentration levels and Tanalith-E at %4.5.
📊
Key Findings & Data:The changes in surface glossiness were investigated after accelerated weathering for 100 and 300 hours.
💡
Conclusion & Impact:When the wood materials that impregnated with mimosa and quebracho extracts applied to polyurethane varnish, they can be maintained both durability and surface glossiness for a longer time.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Tanen · vernik · hızlandırılmış yaşlandırma

Abstract

Abstract: In this study, beech woods (Fagus orientalis L.) were subjected to coating process with polyurethane, cellulosic and water-based varnishes after impregnated with mimosa (Acacia mollissima) and quebracho (Shinopsis lorentzii) extracts at 5%, and 10% concentration levels and Tanalith-E at %4.5. The changes in surface glossiness were investigated after accelerated weathering for 100 and 300 hours. According to the obtained results, the highest glossiness values for before and after accelarated weathering were obtained untreated control samples. Also, the surface glossiness values were decreased with the accelerated weathering the except for polyurethane varnish. The best result for varnishes types in terms of glossiness have been obtained in polyurethane varnish. The surface glossiness of polyurethane gave higher values when the weathering period reached 100 hours as compared before weathering. When the concentration levels of tannis reached from 5% to 10%, the glossiness values were decreased in certain rates. When the wood materials that impregnated with mimosa and quebracho extracts applied to polyurethane varnish, they can be maintained both durability and surface glossiness for a longer time.

Özet

Özet: Bu çalışmada, %5 ve %10 konsantrasyonlarda mimoza (Acacia mollissima) ve kebrako (Shinopsis lorentzii) ekstraktları ve %4.5’lik Tanalith-E ile emprenye edilen kayın (Fagus orientalis L.) odunundan hazırlanan deney örnekleri poliüretan, selülozik ve su bazlı vernikler ile üst yüzey işlemine tabi tutulmuştur. 100 ve 300 saatlik hızlandırılmış yaşlandırma sonrasında yüzey parlaklığında meydana gelen değişimler araştırılmıştır. Elde edilen sonuçlara göre, yaşlandırma öncesi ve yaşlandırma sorası en yüksek parlaklık değerleri emprenye edilmemiş kontrol örneklerinde elde edilmiştir. Ayrıca poliüretan verniği haricinde genel olarak yaşlandırma işlemi ile birlikte vernik yüzeylerindeki parlaklık değerlerinde azalma meydana gelmiştir. Vernik çeşitleri içerisinde en iyi parlaklık değerleri poliüretan verniğinde elde edilmiştir. 100 saat yaşlandırma işlemine tabi tutulan poliüretan vernikli deney örnekleri kontrol örneklerine göre daha yüksek parlaklık değeri vermiştir. Tanenler ile emprenye edilen örneklerde konsantrasyon seviyesi %5’ten %10’a arttırıldığında parlaklık değerlerinde belli oranlarda azalma görülmüştür. Bu sonuçlara göre, mimoza ve kebrako ekstraktları ile emprenye edilen ağaç malzemeler poliüretan verniği uygulanarak hem dayanıklılıkları hem de yüzey parlaklıkları uzun süre korunabilir.Anahtar kelimeler: Tanen, vernik, hızlandırılmış yaşlandırma, parlaklık

🔖

Cite This Article

YALÇIN, M. (2018). Surface glossiness properties of wood impregnated with some plant extracts. Forestist, Cilt: 68 Sayı: 1, 61–69. https://ajindex.com/articles/990311

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. ASTM D-3023, 1981. Determination of Resistance of Factory Applied Coatings on Wood Products of Stain and Reagents, American Society for Testing and Materials, USA. Baysal, E., Tomak, E. D., Ozbey, M., Altin, E., 2013. Surface properties of impregnated and varnished Scots pine wood after accelerated weathering. Coloration Technology 130(2): 140-146.
  2. Baysal, E., Sönmez, A., Göktaş, O., Demirci, Z., Çolak, M., Özen, E., Çolak, A.M., 2005. Determination of physical and biological performance accelerated weathering methods of various surface treatment agents and improve the performance characteristics, Muğla University, pp. 17-138 [Turkish]. Bozkurt, A.Y., Göker, Y., Erdin, N., 1993.
  3. Impregnation Techniques, Istanbul University, Faculty of Forestry Publication, I.U. Publication no: 3779, 429, İstanbul [Turkish]. Budakçı, M., 2003. Design and production of a new adhesion testing device and its utilization with testing of wood varnishes. PhD Thesis, Institute of Science and Technology, Ankara, pp. 178 [Turkish]. Cao, Y., Lu, J., Huang, R., Zhao, Y., Wu, Y., 2011. Evaluation of decay resistance for steam-heat-treated wood. Bioresources 6(4): 4696-4704.
  4. Clausen, C.A., Yang, V., 2007. Protecting wood from mould, decay, and termites with multi-component biocide systems. International Biodeterioration&Biodegradation 59 (1): 20-24.
  5. Çakıcıer, N., 2007. Changes Due to Weatherıng of Surface Finishing Layers of Wood, PhD Thesis, Institute of Science and Technology, Istanbul, pp. 212 [Turkish]. Çakıcıer, N., Korkut, S., Korkut, D.S., Kurtoğlu, A., Sönmez, A., 2011. Effects of QUV accelerated aging on surface hardness, surface roughness, glossiness and color difference for some wood species. International Journal of the Physical Sciences 6(8): 1929-1939.
  6. Evans, P., Chowdhury, J.M., Mathews, B., Schmalzl, K., Ayer, S., Kiguchi M., Kataoka, Y., 2005. Handbook of Environmental Degradation of Materials, William Andrew Inc., New York. Feist, W.C., 1982. Weathering of wood in structural uses. Wood Science and Technology 1: 156-178.
  7. Huş, S., 1969.
  8. Forest Products Chemistry, Istanbul University, Faculty of Forestry Publication, Publication no: 1451, Istanbul [Turkish]. Ichihara, Y., Yamaji, K., 2009. Effect of light conditions on resistance of current-year Fagus crenata seedlings against fungal pathogens causing damping-off in natural Beech forest: Fungus isolation and histological and chemical resistance. Journal of Chemical. Ecology 35: 1077–1085. ISO 2813, 1994. Paints and varni