Journals / Forestist / 2018 / Cilt: 68 Sayı: 2

Effects of heat treatment on some macroscopic and physical properties of Scots pine sapwood and heartwood

Isıl işlemin sarıçam diri odunu ve öz odununun makroskobik ve fiziksel özellikleri üzerindeki etkileri

Journal
Forestist
Pages
93–100
Publication Date
2018-07-20
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Thus, it can be concluded that this reduction due to the increased temperature is related to the formation of internal cracks.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:DOI: 10.26650/forestist.2018.343295Impact of heat treatment (ThermoWood) on the macro structure and physical properties of Scots pine sapwood and heartwood were studied by visual examinations, using the following relevant standard test methods: ASTM D2244 and TS 2472, respectively.
📊
Key Findings & Data:In the study, two processes-Thermo-S (190 ̊ C) and Thermo-D (212 ̊ C)-were employed for heat treatment.
💡
Conclusion & Impact:Thus, it can be concluded that this reduction due to the increased temperature is related to the formation of internal cracks.
🔬Design:Research Article
📍Scope:2018 Verileri
⚙️Variables:ThermoWood · makro yapı · fiziksel özellikler

Abstract

DOI: 10.26650/forestist.2018.343295Impact of heat treatment (ThermoWood) on the macro structure and physical properties of Scots pine sapwood and heartwood were studied by visual examinations, using the following relevant standard test methods: ASTM D2244 and TS 2472, respectively. In the study, two processes-Thermo-S (190 ̊ C) and Thermo-D (212 ̊ C)-were employed for heat treatment. To compare the effect of different types of heat treatment, kiln dried wood samples were used for reference. Macroscopic investigation showed that superficial cracks occurred in all samples, and as the temperature increased, the severity and number of cracks increased. In the Thermo-D process, internal cracks and cupping were seen only in heartwood samples. Physical examination showed that as the temperature increased, color of the samples darkened, the density of the samples decreased, dimensional stability was enhanced. The Anti Swelling-Efficiency (ASE) in the Thermo-S and Thermo-D processes evaluated in sapwood samples was 17.04% and 24.77%, respectively; however, values in the heartwood samples were 11.97% and 30.45%, respectively. The highest reduction ratio of air dried density was 14.04% in the Thermo-D process applied to the heartwood samples. Thus, it can be concluded that this reduction due to the increased temperature is related to the formation of internal cracks.

Özet

DOI: 10.26650/forestist.2018.343295Isıl işlemin (ThermoWood) sarıçam diri odunu ve öz odununun makro yapısı ve fiziksel özellikleri üzerindeki etkileri görsel olarak ve ilgili standartlar (ASTM D2244, TS 2472) aracılığıyla incelenmiştir. Thermo-S için 190 ̊ C ve Thermo-D için 212 ̊ C olmak üzere iki farklı işlem kullanılmıştır. Isıl işlemin etkilerini karşılaştırmak amacıyla fırın kurusu örnekleri referans alınmıştır. Makroskobik incelemeler sonucunda tüm örneklerde yüzeysel çatlakların oluştuğu ve sıcaklık arttıkça çatlakların sayısının ve şiddetinin arttığı görülmüştür. Sadece Thermo-D uygulanmış öz odun örneklerinde iç çatlak oluşumu ve oluklaşma tespit edilmiştir. Fiziksel incelemeler göstermektedir ki sıcaklık arttıkça örneklerin rengi koyulaşmakta, yoğunluk değerleri düşmekte ve boyutsal stabilizasyon iyileşmektedir. Anti Genişleme Etkisi sırasıyla Thermo-S ve Thermo-D diri odun örnekleri için %17,04 ve %24,77, öz odun örnekleri için %11,97 ve %30,45 olarak belirlenmiştir. Hava kurusu yoğunluk değerlerindeki en yüksek azalma oranı Thermo-D uygulanmış öz odun örneklerinde %14,04 olarak tespit edilmiştir. Sıcaklığın artması sonucu oluşan bu azalma eğiliminin çatlak oluşumu ile ilişkili olduğu düşünülmektedir.

🔖

Cite This Article

TUNCER, F. D., DOĞU, A. D. (2018). Effects of heat treatment on some macroscopic and physical properties of Scots pine sapwood and heartwood. Forestist, Cilt: 68 Sayı: 2, 93–100. https://ajindex.com/articles/990295

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Abe, K., Yamamoto, H., 2005. Mechanical interaction between cellulose microfibril and matrix substance in wood cell wall determined by X-ray diffraction. Journal of Wood Science 51(4): 334-338.
  2. Akgul, M., Korkut, S., 2012. The effect of heat treatment on some chemical properties and colour in Scots pine and Uludağ fir wood. International Journal of Physical Sciences 7(21): 2854-2859.
  3. Altgen, M., Adamopoulos, S., Ala-Viikari, J., Hukka, A., Tetri, T., Militz, H., 2012. Factors Influencing The Crack Formation In Thermally Modified Wood. In: Proceedings of The Sixth European Conferance On Wood Modification, Ljubljana, Slovenia. Altgen, M., Adamopoulos, S., Militz, H., 2015. Wood Defects During Industrial Scale Production Of Thermally-Modified Norway Spruce And Scots Pine. Wood Material Science and Engineering 12(1): 14-23.
  4. Andersson, S., Wikberg, H., Pesonen, E., Maunu, S.L., Serimaa, R., 2004. Studies of Crystallinity of Scots Pine And Norway Spruce Cellulose. Trees 18(3): 346-353. Anonymous, 2003. Thermowood Handbook. Finnish Thermowood Association, Fin-00171 Helsinki-Finland. Awoyemi, L., Jones, I.P., 2011. Anatomical Explanations For The Changes In Properties Of Western Red Cedar (Thuja Plicata) Wood During Heat Treatment. Wood Science Technology 45: 261–267.
  5. Bekhta, P.; Niemz, P., 2003. Effect of high temperature on the change of color, dimensional stability and mechanical properties of spruce wood. Holzforschung 57: 539-546.
  6. Boonstra M.J., Rijsdijk, J., Sander, C., Kegel, E., Tjeerdsma, B., Militz, H., Van Acker, J., Stevens, M., 2006. Microstructural And Physical Aspects Of Heat-Treated Wood. Part 1, Softwood. Maderas Ciencia Y Tecnología 8: 193-208. Boonstra M.J., 2008. A Two-Stage Thermal Modification of Wood, Ph.D. Dissertation in Cosupervision Ghent University and Université Henry Poincaré, ISBN 978-90- 5989-210-1.
  7. Dogu, D., Tirak, K., Candan, Z., Unsal, O., 2010. Anatomical Investigation Of Thermally Compressed Wood Panels. Bioresources 5(4): 2640-2663.
  8. Dogu, D., Tirak Hizal, K., Bakir, D., Tuncer, F.D., Candan, Z., Unsal, O., 2015. Anatomical Structures Of Thermally Compressed Paulownia (Paulownia spp.) Wood. In: Proceedings of the 58th International Convention Of Society Of Wood Science And Technology, Wyoming, ABD. Dogu, D., Bakir, D., Tuncer, F.D., Tirak Hizal, K., Candan, Z., Unsal, O., 2016. Microscopic Investigation Of Defects In Thermally Compressed Poplar Wood Panels. Maderas Ciencia Tecnologia 18(2): 337-348.
  9. Dubey, M.K., 2010. Improveme