Journals / Engineering Sciences / 2011 / Cilt: 6 Sayı: 4

ESTIMATION OF SPLITTING TENSILE STRENGTH OF CONCRETES WITH WASTE MARBLE DUST AND GLASS FIBRE BY ARTIFICIAL NEURAL NETWORK

YAPAY SYNYR A?LARI YLE ATIK MERMER TOZU VE CAM LYF KATKILI BETONLARIN YARMADA ÇEKME DAYANIMLARININ TAHMYNY

Pages
1498–1508
Publication Date
2011-05-01
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of this study, developed ANN model compared with the obtained experimental values and it was detected that results match with each other.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, filler material and %25, 50, 75 and 100 volume ratio waste marble dust which can be used in place of filler material, added to 300 and 350 dosages concrete obtained by adding glass fibre in four diffferent ratios.
📊
Key Findings & Data:Splitting tensile strength, compressive strength, porosity and ultrasonic pulse velocity of obtained sample is detected.
💡
Conclusion & Impact:As a result of this study, developed ANN model compared with the obtained experimental values and it was detected that results match with each other.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Cam Lif · Atyk Mermer Tozu · Beton

Abstract

In this study, filler material and %25, 50, 75 and 100 volume ratio waste marble dust which can be used in place of filler material, added to 300 and 350 dosages concrete obtained by adding glass fibre in four diffferent ratios. Splitting tensile strength, compressive strength, porosity and ultrasonic pulse velocity of obtained sample is detected. Approximate estimation of splitting tensile strength performed via selecting dosages, amount of aggregate, fibre ratio, marble dust ratio, porosity, ultrasonic pulse velocity and splitting tensile strength as an input of Artificial Neural Network (ANN). As a result of this study, developed ANN model compared with the obtained experimental values and it was detected that results match with each other.

Özet

Bu çaly?mada; 4 farkly oranda cam lif ilave edilerek elde edilen 300 ve 350 dozlu betonlara filler malzeme ile hacimce %25, 50, 75 ve 100 oranlarynda yer de?i?tirecek ?ekilde atyk mermer tozu ilave edildi. Elde edilen numunelerin ultrases geçi? hyzlary, porozite de?erleri, basynç dayanymlary ve yarmada çekme dayanymlary belirlendi. Yapay sinir a?yna (YSA) girdi seti olarak dozaj, agrega miktary, lif orany, mermer tozu orany, porozite, ultrases geçi? hyzy ve basynç dayanymy de?erleri seçilerek yarmada çekme dayanymlary tahmin edildi. Çaly?ma sonucunda, geli?tirilen YSA modeli ile deneysel olarak elde edilen veriler kar?yla?tyryldy ve sonuçlaryn uyum içerisinde oldu?u belirlendi.

🔖

Cite This Article

Keleştemur, O., Yıldız, S., Demirel, B. (2011). ESTIMATION OF SPLITTING TENSILE STRENGTH OF CONCRETES WITH WASTE MARBLE DUST AND GLASS FIBRE BY ARTIFICIAL NEURAL NETWORK. Engineering Sciences, Cilt: 6 Sayı: 4, 1498–1508. https://doi.org/10.12739/nwsaes.v6i4.5000066960

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...