Journals / Engineering Sciences / 2018 / Cilt: 13 Sayı: 3

SYNTHESIS OF Ti3SiC2 MAX PHASE FROM ELEMENTAL POWDERS

Ti3SiC2 MAX FAZININ ELEMENTEL TOZ KULLANILARAK SENTEZİ

Pages
156–166
Publication Date
2018-07-23
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that, the silicon content was important and carbon plays critical role.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In MAX phase material family, Ti-Si-C system and especially 312 Ti3SiC2 phase is the most attracted and investigated structure.
📊
Key Findings & Data:In this article, the processing of high purity Ti3SiC2 phase was studied using Ti, Si and C powders.
💡
Conclusion & Impact:The results showed that, the silicon content was important and carbon plays critical role.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:MAX Fazı · Seramik Sistemler · İşlenebilir Seramikler

Abstract

In MAX phase material family, Ti-Si-C system and especially 312 Ti3SiC2 phase is the most attracted and investigated structure. It can be produced from different methods. As expected, each method differs processing methods, experimental conditions and parameters depending on the starting composition. In this article, the processing of high purity Ti3SiC2 phase was studied using Ti, Si and C powders. The powders were mixed in stoichiometric ratio to obtain pure Ti3SiC2 phase. Both of the initial and the obtained product samples were characterised using SEM, XRD, XRF, TG/DTA methods. The results showed that, the silicon content was important and carbon plays critical role. X-ray diffraction analysis showed that the 312 TiSiC phases was formed after the sintering at temperature of 1350 ˚C for 2 h. If excess carbon is present in the system, the formed MAX phase was converted into binary carbide phases.

Özet

MAX seramik ailesinde en dikkat çeken ve üzerinde en fazla araştırma yapılan sistem Ti-Si-C sistemi ve 312 yapısıdır. Ti3SiC2 fazı farklı başlangıç malzemeleri kullanılarak üretilmektedir. Kullanılan malzemelere bağlı olarak, üretim parametreleri ve yöntemleri farklılık göstermektedir. Bu çalışmada, titanyum, silisyum ve karbon kullanılarak, hazırlanan stiokiometrik karışımdan yüksek safiyette Ti3SiC2 fazının sentezi çalışılmıştır. Kullanılan başlangıç karışımları ve elde edilen reaksiyon ürünleri SEM, XRD, XRF, TG/DTA gibi analiz yöntemleriyle analiz edilmiştir. Deneysel sonuçlara göre, başlangıç karışımında bulunan silisyum miktarı önemlidir. X-ışınları analizi göstermiştir ki; 1350˚C'de ve iki saat sinterleme süresinden sonra yapıda 312 MAX fazı oluşmaktadır. Ortamda bulunan karbon kilit role sahiptir ve fazla karbonun bulunması halinde oluşan MAX fazı, yüksek sıcaklılarda ikili karbür yapısına dönüşmektedir.

🔖

Cite This Article

ATASOY, A., SAKA, E., KOŞAR, A. (2018). SYNTHESIS OF Ti3SiC2 MAX PHASE FROM ELEMENTAL POWDERS. Engineering Sciences, Cilt: 13 Sayı: 3, 156–166. https://ajindex.com/articles/986267

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Noontny, H., (1970). Struktu chemite einiger verbindungen der ubergangs metallemit den elementen C Si Ge Sn. Prog Solid State Chem, vol:2, pp:27-62
  2. Noontny, H., Schuster, J.C., Rogl, P., (1982). Structural chemistry of complex carbides and related compounds, J Solis State Chem, vol:44, pp:126-133
  3. Barsoum, M.W. and El-Raghy, T., (1996). Synthesis and characterization of a remarkable Ceramic: Ti3SiC2. J Amer Cer Soc. Vol:79, pp:1953-1956
  4. Hu, C., Xhang, H., Li, F., Huang, Q., and Bao, Y., (2013). New phases discovery in MAX family. Int J Ref Metals Hard Mat, vol:36, pp:300-312
  5. Rodovic, M. and Barsoum, M.W., (2013). Max phases: Bridging the gap between metals and ceramics. Amer Ceram Soc, vol:92, no:3, pp:20-27
  6. Barsoum, M.W. and El-Raghy, T., (2001). The max phases: unique new carbides and nitride materials. Amer Scientific, vol:89, pp:334-343
  7. Chen, D., Shirato, K., Barsoum, M.W., El-Raghy, T., and Ritchie, R.O., (2001). Cyclic fatigue-crack growth and fracture properties in Ti3SiC2 ceramics at elevated temperatures, J Amer Ceram Soc vol:84, no:12, pp:2914-2920
  8. Sunberg, M., Malamgvist, G., Magnusson, A., and El-Raghy, T., (2004). Alumina forming high temperature silicides-carbides, Ceram Inter, vol:30, pp:899-1904
  9. Wang, X. and ark., (2012). Ti5Al2C3: A new ternary carbide belonging to MAX phases in the Ti–Al–C system. J Amer Cer Soc. Vol:95, pp:1508-1510
  10. Lin, Z.J., and ark., (2006). Microstructure and theoretical bulk modulus of layered ternary tantalum aluminum carbides, J Amer Cer Soc. 89:3765-376
  11. Dubois, S., Cabioch, T., Chartier, P., Gauthier, V., and Jaouen, M., (2007). A new ternary nano laminate carbide: Ti3SnC2. J Amer Cer Soc. 90:2642-2644
  12. Etzkorn, J., Ade, M., and Hillebrecht, H., (2007). V2AlC, V4AlC3-x (x≈0.31), and V12Al3C8: synthesis, crystal growth, structure, and superstructure, Inorganic Chemistry 46:7646-7653
  13. Zhou, Y.C. Meng, F.L., and Zhang, J., (2008). New MAX-phase compounds in the V-Cr-Al-C system. J Amer Cer Soc. 91:1357-1360
  14. Etzkorn, J., Ade, M., and Hillebrecht, H., (2007). Ta3AlC2 and Ta4AlC3-single-crystal investigations of two new ternary carbides of tantalum synthesized by the molten metal technique'', Inorganic Chemistry 46: 1410-1418
  15. Hu, C.F, Li, F.Z., Zhang, J., Wang, J.M., Wang, J.Y., and Zhou, Y.C., (2007). Nb4AlC3: A new compound belonging to the MAX phases, Scripta Materialia, 57:893-896
  16. Procopio, A.T., El-Raghy, T., and Barsoum M.W., (2000