SavedAdd your journal

Journals / Renewable Energy Sources Energy Policy and Energy Management / 2021 / Cilt: 2 Sayı: 1

Vehicle Retarder Systems

İbrahim DOĞAN
Hasan AYDOĞAN
Pages
10–26
Publication Date
2021-03-24
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this review, theoretical information about vehicle deceleration systems and regenerative braking systems, especially used in heavy vehicles, is clearly stated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Security systems are the most important feature required for motor vehicles.
📊
Key Findings & Data:The most important of these systems are brake systems.
💡
Conclusion & Impact:In this review, theoretical information about vehicle deceleration systems and regenerative braking systems, especially used in heavy vehicles, is clearly stated.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:brake system · retarder · regenerative brake

Abstract

Security systems are the most important feature required for motor vehicles. The most important of these systems are brake systems. Due to the inadequacy and costly maintenance of conventional brake systems, auxiliary brake systems have been developed. In this review, theoretical information about vehicle deceleration systems and regenerative braking systems, especially used in heavy vehicles, is clearly stated.

🔖

Cite This Article

DOĞAN, İ., AYDOĞAN, H. (2021). Vehicle Retarder Systems. Renewable Energy Sources Energy Policy and Energy Management, Cilt: 2 Sayı: 1, 10–26. https://ajindex.com/articles/975375

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Mutlu, I.,2002, ''Seramik katkili asbestsiz otomotiv fren balatasi uretimi ve frenleme karakteristiginin deneysel incelenmesi'', Doktora Tezi, Sakarya Universitesi Fen Bilimleri Enstitüsü, Sakarya
  2. Qu, J., Blau, P.J., Watkins, T.R., Cavin, O.B., Kulkarni, N.S.,2005, ''Friction and wear of titanium alloys sliding against metal, polymer and ceramic counter faces'', Wear, 258 (9), 1348-1356
  3. Krishna, G. A., & Kumar, K. S.,2018, ''Experimental investigation of influence of various parameters on permanent magnet eddy current braking system'', Materials Today: Proceedings, 5(1), 2575-2581
  4. Al, T. J. M. E.,2002, ''Thermal cracking in disc brakes'', Engineering Failure Analysis, Issue 9, pp.63 – 76
  5. Alibelhocine, M.,2012, ''Thermomechanical modelling of dry contacts in automotive disc brake'', International journal of Thermal Sciences Vol.60, pp.161 – 170
  6. H.S.Qi, A. J. D.,2007, ''Investigation of disc / pad interface temperatures in friction braking'', Wear, Issue 262, pp.505 – 513
  7. J.Bijwe, N., N.Majumdar, B.K.Satapathy,2005, ''Influence of modified phenolic resins on the fade and recovery of friction materials'', Wear, Issue 259, pp.1068 – 1078
  8. P.J.Blau, J. C. M.,2003, ''Tribol'', Int 36, pp.709 – 715
  9. Osman Tahasen, J. T. D., Rajendra Singh,2013, ''Low frequency dynamics of a translating friction element in the presence of frictional guides, as motivated by a brake vibration problem'', Journal of Sound and Vibration, Issue 332, pp.5766 – 5788
  10. Dunlop Kb, R. M., Longhouse Re.,1999, ''An investigative overview of automotive disc brake noise'', SAE paper
  11. H. Hetzler, K. W.,2011, ''On the influence of contact tribology on brake squeal'', Tribology International, Vol.11, pp.237 – 246
  12. Kung Sw, D. K., Ballinger Rs.,2000, ''Complex Eigenvalue analysis for reducing low frequency brake squeal'', Technical report 2000 – 01 – 0444, Warrendale (PA)
  13. Mario Triches Junior, S. N. Y. G., Roberto Jordan,,2008, ''Analysis of brake squeal noise using the finite element method: A parametric study'', Applied Acoustics Vol.69, pp.147 -162
  14. Holmberg, K., Matthews, A.,,1994, ''Coating Tribology-Properties'', Techniques and Applications in Surface Engineering, 28, pp 257-307
  15. Bettge, D., Starcevic J.,,2003, ''Topographic properties of the contact zones of wear surfaces in disc brakes'', Wear, 254,195-202
  16. Pernestål, A., Warnquist, H., & Nyberg, M.,2009, ''Modeling and troubleshooting with interventions applied