SavedAdd your journal

Journals / International Journal of Electronics Mechanical and Mechatronics Engineering / 2013 / Cilt: 3 Sayı: 3

SIW HIGH GAIN SLOT ANTENNA FOR WLAN/WIMAX APPLICATION

Neda Akbari
Javad Nourinia
Ch. Ghobadi
Pages
607–609
Publication Date
2013-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In feed netowork is used from new method of feeding with using of aperture couple and cavity resonator method

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this paper with using substrate integrated waveguide technology and slot antenna, an antenna array with 8 (2×4) elements has been designed.
📊
Key Findings & Data:The antenna substrate is ROGERs 4003 with two different thickness.
💡
Conclusion & Impact:In feed netowork is used from new method of feeding with using of aperture couple and cavity resonator method
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:antenna · array antenn · substrate integrated Waveguide

Abstract

In this paper with using substrate integrated waveguide technology and slot antenna, an antenna array with 8 (2×4) elements has been designed. The antenna substrate is ROGERs 4003 with two different thickness. In lower substrate with 0.5 mm thickness fed network of antenna is putted and upper substrate with 1.5 mm thickness slot in order to radation is embedded. The proposed antenna is designed in C band for WLAN/WiMAX application. Pattern of antenna is directive with peak gain about 18dBi. In feed netowork is used from new method of feeding with using of aperture couple and cavity resonator method

🔖

Cite This Article

Akbari, N., Nourinia, J., Ghobadi, C. (2013). SIW HIGH GAIN SLOT ANTENNA FOR WLAN/WIMAX APPLICATION. International Journal of Electronics Mechanical and Mechatronics Engineering, Cilt: 3 Sayı: 3, 607–609. https://ajindex.com/articles/974709

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. C. A. Balanis, Antenna Theory: Analysis and Design, Wiley and Sons, New York, NY, USA, 2nd edition, 1997.
  2. D. Deslandes and K. Wu, “Single-substrate integration technique of planar circuits and waveguide filters,” IEEE Transactions on Microwave Theory and Techniques, vol. 51, no. 2 I, pp. 593–596, 2003.
  3. D. Deslandes and K. Wu, “Integrated microstrip and rectangular waveguide in planar form,” IEEE Microwave and Wireless Components Letters, vol. 11, no. 2, pp. 68– 70, 2001.
  4. D. Deslandes and K. Wu, “Integrated transition
  5. waveguides,” IEEE International Microwave Symposium Digest, vol. 2, pp. 619–622, 2001.
  6. A. J. Farrall and P. R. Young, “Integrated waveguide
  7. Letters, vol. 40, no. 16, pp. 974–975, 2004.
  8. L. Yan, W. Hong, G. Hua, J. Chen, K. Wu, and T. J. Cui, “Simulation and experiment on SIW slot array antennas,” IEEE Microwave 200.00 Theta [deg]