SavedAdd your journal

Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2023 / Cilt: 11 Sayı: 4

Production of MgAlSi Ternary Alloy and in-vitro bio Compatibility Investigation

MgAlSi Üçlü Alaşımının Üretimi ve in-vitro biyo Uyumluluk İncelemesi

Yusuf SAĞIR
Hanife ÇAKAL
Esma ELMACI
Bünyamin ÇİÇEK
Pages
2145–2154
Publication Date
2023-10-24
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been concluded that it meets the basic biocompatibility conditions with pH balance and % vitality analysis.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, an alloy containing Al and Si elements together with biocompatible Mg metal was produced.
📊
Key Findings & Data:MgAlSi ternary alloy was subjected to 350C/12h homogenization heat treatment after production.
💡
Conclusion & Impact:It has been concluded that it meets the basic biocompatibility conditions with pH balance and % vitality analysis.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Mg alaşımı · Biyo uyumluluk · Sitotoksisite

Abstract

In this study, an alloy containing Al and Si elements together with biocompatible Mg metal was produced. The production process was made by melting in an induction furnace. MgAlSi ternary alloy was subjected to 350C/12h homogenization heat treatment after production. Scanning electron microscope (SEM) was used to examine the microstructure of the obtained samples. For biocompatibility studies, it was applied with three different tests: immersion corrosion, potentiodynamic corrosion and cytotoxicity (MTT). Corrosion tests were carried out in Hank's solution. It has been concluded that it meets the basic biocompatibility conditions with pH balance and % vitality analysis. Thus, the use of the structure as a biomaterial is discussed.

Özet

Bu çalışmada biyo uyumlu Mg metali ile birlikte Al ve Si elementlerini içeren bir alaşım üretilmiştir. Üretim işlemi indüksiyon ocağında ergiterek yapılmıştır. MgAlSi üçlü alaşımı üretim sonrasında 350C/12 saat homojenleştirme ısıl işlemine alınmıştır. Elde edilen numunelere mikro yapı incelemesi için taramalı elektron mikroskobu (SEM) kullanılmıştır. Biyo uyumluluk incelemeleri için daldırma korozyon, potansiyodinamik korozyon ve sitotoksisite (MTT) olmak üzere 3 farklı test ile uygulanmıştır. Korozyon testleri Hank’s solüsyonu içerisinde gerçekleştirilmiştir. pH dengesi ve % canlılık oranı analizleri ile temel biyouyumluluk şartlarını taşıdığı sonucuna varılmıştır. Böylece yapının biyo malzeme olarak kullanımı tartışılmıştır.

🔖

Cite This Article

SAĞIR, Y., ÇAKAL, H., ELMACI, E., ÇİÇEK, B. (2023). Production of MgAlSi Ternary Alloy and in-vitro bio Compatibility Investigation. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 11 Sayı: 4, 2145–2154. https://ajindex.com/articles/971511

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. MÖ, P., "Magnesium Alloying, Some Potentials for Alloy Development," Journal of Japan Institute of Light Metals, vol. 42, no. 12, pp. 679-686, 1992
  2. Polmear, I., "Recent Developments in Light Alloys," Materials Transactions, vol. 37, no. 1, pp. 12-31, 1996
  3. Lee, Y., Dahle, A., St John, D., "The Role of Solute in Grain Refinement of Magnesium," Metallurgical and Materials Transactions A, vol. 31A, no. 11, pp. 2895-2906, 2000
  4. Levent, E., "Biyobozunur Mg-Ag Alaşımlarının Mikroyapı, Mekanik Ve Korozyon Özelliklerine Zn Ve Nd Elementlerinin Etkisi," Düzce Üniversitesi Bilim ve Teknoloji Dergisi, vol. 10, no. 3, pp. 1372-1382, 2022
  5. Froes, F., Eliezer, D., Aghion, E., "The Science, Technology, and Applications of Magnesium," The Journal of The Minerals, Metals & Materials Society (TMS), vol. 50, no. 9, pp. 30-34, 1998
  6. Furuya, H., Kogiso, N., Matunaga, S., Senda, K., Applications of Magnesium Alloys for Aerospace Structure Systems, Materials Science Forum, Trans Tech Publ, (2000) 341-348
  7. Bamberger, M., Dehm, G., "Trends in the Development of New Mg Alloys," Annu. Rev. Mater. Res., vol. 38, no. pp. 505-533, 2008
  8. Witte, F., "The History of Biodegradable Magnesium Implants: A Review," Acta Biomaterialia, vol. 6, no. 5, pp. 1680-1692, 2010
  9. Kannan, M. B., Koc, E., Unal, M., "Biodegradability of Β-Mg17al12 Phase in Simulated Body Fluid," Materials letters, vol. 82, no. pp. 54-56, 2012
  10. Wang, Q., Davidson, C., "Solidification and Precipitation Behaviour of Al-Si-Mg Casting Alloys," Journal of materials science, vol. 36, no. 3, pp. 739-750, 2001
  11. Çiçek, B., Ahlatçı, H., Sun, Y., "Wear Behaviours of Pb Added Mg–Al–Si Composites Reinforced with in Situ Mg2 Si Particles," Materials & Design, vol. 50, no. pp. 929-935, 2013
  12. Korgiopoulos, K., Langelier, B., Pekguleryuz, M., "Mg17al12 Phase Refinement and the Improved Mechanical Performance of Mg-6al Alloy with Trace Erbium Addition," Materials Science and Engineering: A, vol. no. pp. 141075, 2021
  13. Zhu, L., Qiu, F., Zou, Q., Han, X., Shu, S.-L., Yang, H.-Y., Jiang, Q.-C., "Multiscale Design of Α-Al, Eutectic Silicon and Mg2si Phases in Al-Si-Mg Alloy Manipulated by in Situ Nanosized Crystals," Materials Science and Engineering: A, vol. 802, no. pp. 140627, 2021
  14. Gu, X.-N., Zheng, Y.-F., "A Review on Magnesium Alloys as Biodegradable Materials," Front. Mater. Sci., vol. 4, no. 2, pp. 111-115, 2010
  15. Çiçek, B., Sun, Y., "A Study on the Mechanical and Corrosion