Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2023 / Cilt: 11 Sayı: 4

A Simplified Approach to Determine Shear Strength for Corroded RC Beams

Korozyona Uğramış Betonarme Kirişler için Kesme Dayanımını Belirlemeye Yönelik Basitleştirilmiş Bir Yaklaşım

Pages
1958–1971
Publication Date
2023-10-24
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The study shows that with these systems, which can perform learning based on experimental data, it is possible to estimate the shear strength values of corroded beams with known production parameters without the need for experimental measurements.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Corrosion damage, which can be considered as a construction or usage defect during the life of the structure, is an important parameter for the structural elements.
📊
Key Findings & Data:Strength loss is observed in reinforced concrete (RC) elements due to corrosion, which is an important parameter affecting the performance of the building.
💡
Conclusion & Impact:The study shows that with these systems, which can perform learning based on experimental data, it is possible to estimate the shear strength values of corroded beams with known production parameters without the need for experimental measurements.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Korozyonlu kiriş · kesme dayanımı · makine öğrenmesi

Abstract

Corrosion damage, which can be considered as a construction or usage defect during the life of the structure, is an important parameter for the structural elements. Strength loss is observed in reinforced concrete (RC) elements due to corrosion, which is an important parameter affecting the performance of the building. Determining the shear strength of beams with corroded reinforcement is important in terms of strength loss, design, and reinforcement criteria in the structural element. In this context, the data of the corroded RC beam experimental tests carried out in the literature were collected and the ultimate shear strength values of the beams were determined depending on the test parameters. Strength estimation was performed with machine learning regression algorithms XGBoost and AdaBoost. The results obtained were evaluated with R2, RMSE and MAE performance metrics and high estimation success was achieved. The study shows that with these systems, which can perform learning based on experimental data, it is possible to estimate the shear strength values of corroded beams with known production parameters without the need for experimental measurements.

Özet

Yapı ömrü boyunca yapım ya da kullanım kusuru sayılabilecek korozyon hasarı yapı elemanları için önemli bir parametredir. Korozyon sebebiyle betonarme elemanlarda dayanım kaybı görülmekte bu da yapı performansını etkileyen önemli bir parametre olmaktadır. Donatısı korozyona uğramış kirişlerin kayma mukavemetinin belirlenmesi, yapı elamanında dayanım kaybı, tasarım ve güçlendirme kriterleri açısından önemli olmaktadır. Bu çalışmada yapay zekâ algoritmaları ile betonarme kiriş deneylerinden elde edilen kesme dayanımı değerlerinin deneysel çalışmaya gerek kalmadan belirlenmesi amaçlanmaktadır. Bu kapsamda literatürde gerçekleştirilmiş korozyona uğramış betonarme kiriş deneyleri verileri toparlanmış, deney parametrelerine bağlı olarak kirişlerin nihai kesme dayanımı değerleri tespit edilmiştir. Dayanım tahmini makine öğrenmesi regresyon algoritmalarından XGBoost ve AdaBoost ile gerçekleştirilmiştir. Elde edilen sonuçlar R2, RMSE ve MAE performans metrikleri ile değerlendirilmiş ve yüksek tahmin başarısına ulaşılmıştır. Çalışma göstermektedir ki deneysel verilere bağlı öğrenme gerçekleştirebilen bu sistemler ile üretim parametreleri bilinen ve korozyona uğramış kesme dayanımı değerlerini deneysel ölçümlere ihtiyaç duymadan tahmin etmek mümkündür.

🔖

Cite This Article

DOGAN, G. (2023). A Simplified Approach to Determine Shear Strength for Corroded RC Beams. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 11 Sayı: 4, 1958–1971. https://ajindex.com/articles/971500

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. D. Li, R. Wei, F. Xing, L. Sui, Y. Zhou, W. Wang, “Influence of non-uniform corrosion of steel bars on the seismic behavior of reinforced concrete columns”, Construction and Building Materials, 167, 20–32, 2018
  2. S. Y. Yang, X. B. Song, H. X. Jia, X. Chen, X. L. Liu, “Experimental research on hysteretic behaviors of corroded reinforced concrete columns with different maximum amounts of corrosion of rebar”, Construction and Building Materials, 121, 319-32, 2016
  3. X.H. Wang, F.Y. Liang, “Performance of RC columns with partial length corrosion”, Nuclear Engineering and Design, Volume 238, Issue 12, Pages 3194-3202, 2008
  4. K.A. Soudki, T.G. Sherwood, “Behaviour of reinforced concrete beams strengthened with carbon fibre reinforced polymer laminates subjected to corrosion damage”, Canadian Journal of Civil Engineering, 2000, 27(5): 1005-1010, 2000
  5. H.A. Razak, F.C. Choi, “The effect of corrosion on the natural frequency and modal damping of reinforced concrete beams”, Engineering Structures, 23 (2001) 1126–1133, 2001
  6. T. El Maaddawy, K. Soudki, T. Topper, “Analytical model to predict nonlinear flexural behaviour of corroded reinforced concrete beams”, ACI Structural Journal, 102(4), 550–9, 2005
  7. Y.G. Du, L.A. Clark, A.H.C. Chan, “Impact of reinforcement corrosion on ductile behavior of reinforced concrete beams” ACI Structural Journal, 104(3), 285–93, 2007
  8. J. Rodriguez, L.M. Ortega, J. Casal, “Load carrying capacity of concrete structures with corroded reinforcement”, Construction and Building Materials, Volume 11, Issue 4, Pages 239-248, 1997
  9. C. Higgins, W.C. Farrow, “Tests of Reinforced Concrete Beams with Corrosion Damaged Stirrups”, ACI Structural Journal, Vol. 103, Iss. 1, pp: 133-141, 2006
  10. Z. Ye, W. Zhang, X. Gu, “Deterioration of shear behavior of corroded reinforced concrete beams, Engineering Structures”, Volume 168, Pages 708-720, 2018
  11. O. Poupard, V. L’Hostis, S. Catinaud, I. Petre-Lazar, “Corrosion damage diagnosis of a reinforced concrete beam after 40 years natural exposure in marine environment”, Cement and Concrete Research 36 (2006) 504 – 520, 2006
  12. K. Worden, G. Manson, “The Application of Machine Learning to Structural Health Monitoring. Philosophical Transactions of The Royal Society A: Mathematical”, Physical and Engineering Sciences, 2007, 365(1851), 515-537
  13. G. Gui, H. Pan, Z. Lin, Y. Li, Z. Yuan, “Data-Driven Support Vector Machine with Optimization Techniques for Structural Health