Journals / Türkiye Ormancılık Dergisi / 2020 / Cilt: 21 Sayı: 1

Development of compatible taper equations for brutian pine stands in Asar Forest Sub-district (Antalya)

Asar Orman İşletme Şefliği (Antalya) kızılçam meşcereleri için gövde çapı denklemlerinin geliştirilmesi

Pages
35–42
Publication Date
2020-03-26
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The suitability of Jiang et al. (2005) of the equation was tested by using an independent data group with paired sample t test and it was concluded that the equation can be applied to the study area at p <0.05 significance level.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, five different compatible taper equations were used for Brutian pine (Pinus brutia Ten.) trees within the border of Asar Forest Sub-district in Antalya Forest Management Directorate of Antalya Forest District Regional.
📊
Key Findings & Data:These five equations were produced from the equations of Max & Burkhart (1976), Jiang et al. (2005) and 3 different models of Kozak (1988).
💡
Conclusion & Impact:The suitability of Jiang et al. (2005) of the equation was tested by using an independent data group with paired sample t test and it was concluded that the equation can be applied to the study area at p <0.05 significance level.
🔬Design:Modeling & Simulation
📍Scope:2005 Verileri
⚙️Variables:Kızılçam · Gövde çapı · Gövde çapı tahmini

Abstract

In this study, five different compatible taper equations were used for Brutian pine (Pinus brutia Ten.) trees within the border of Asar Forest Sub-district in Antalya Forest Management Directorate of Antalya Forest District Regional. These five equations were produced from the equations of Max & Burkhart (1976), Jiang et al. (2005) and 3 different models of Kozak (1988). The fitting results of these equations were compared. As a result of the comparison that made according to success criteria’s, the equation of Jiang et al. (2005) with 95.95% model explanation was found to be more successful in predicting stem diameter of Brutian pine. The suitability of Jiang et al. (2005) of the equation was tested by using an independent data group with paired sample t test and it was concluded that the equation can be applied to the study area at p <0.05 significance level. In this regard, it can be concluded that it is possible to obtain more accurate and consistent estimations of stem diameters for Brutian pine (Pinus brutia Ten.) stands by using this equation.

Özet

Bu çalışmada, Antalya Orman Bölge Müdürlüğü, Antalya Orman İşletme Müdürlüğü, Asar İşletme Şefliği sınırları içinde yayılış gösteren kızılçam (Pinus brutia Ten.) meşcereleri için geliştirilen uyumlu gövde çapı denklemlerinin gövde çapını modellemedeki başarıları karşılaştırılmıştır. Bu amaçla, Max and Burkhart (1976), Jiang vd. (2005) ve Kozak (1988)’ın denklemi esas alınarak geliştirilen 3 denklemin oluşturduğu 5 farklı model kullanılmıştır. Başarı ölçütlerine göre yapılan karşılaştırmada, Jiang vd. (2005) tarafından geliştirilen denklemin %95.95’lik açıklayıcılığı ile kızılçamın gövde çapı gelişimlerini modellemede daha başarılı olduğu görülmüştür. Jiang vd. (2005) denkleminin uygunluğu, bağımsız bir veri grubu kullanılarak iki eş arasındaki farkın önemlilik testi ile test edilmiş ve p<0.05 önem düzeyinde denklemin çalışma alanına uygulanabileceği sonucuna varılmıştır. Bu bakımdan, bu denklemin kızılçam meşcerelerinde daha doğru ve tutarlı gövde çapı tahminlerinin yapılmasına imkan sağlayacağı söylenebilir.

🔖

Cite This Article

ÜMİT, M., ŞENYURT, M. (2020). Development of compatible taper equations for brutian pine stands in Asar Forest Sub-district (Antalya). Türkiye Ormancılık Dergisi, Cilt: 21 Sayı: 1, 35–42. https://ajindex.com/articles/964976

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Atalay, F.A., 2014. Mudurnu-Sırçalı Orman İşletme Şefliği’nde Yayılış Gösteren Anadolu Karaçamı [Pinus nigra arnold. subsp. pallasiana (lamb.) holmboe] Meşcereleri İçin Gövde Profil Denklem Sistemlerinin Geliştirilmesi. Yüksek lisans tezi, ÇAKÜ Fen Bilimleri Enstitüsü, Çankırı. Barrio-Anta, M, Dieguez-Aranda, U., Castedo-Dorado, F., Alvarez-Gonzalez, J.G., von Gadow, K., 2007. Merchantable volume system for pedunculate oak in northwestern Spain. Ann. For. Sci., 64: 511-520.
  2. Behre, C.E., 1923. Preliminary notes on studies of tree form. Journal of Forestry, 21: 507-511.
  3. Bennet, F.A., Swindel, B.F., 1972. Taper Curves for Planted Slash Pine. USDA Forest Service, Research Note, SE-179. Biging, G.S., 1984. Taper equations for second-growth mixed conifers of northern California. Forest Science, 30(4): 1103-1117.
  4. Bruce, D., Curtis, R., Vanndevering, C., 1968. Development of system of taper and volume tables for res alder. Forest science, 14: 339-3350.
  5. Burkhart, H.E., 1977. Cubic foot volume of Loblolly pine to any merchantable top limit. Southern Journal of Applied Forestry, 1: 7-9.
  6. Cao, Q.V., Burkhart, H.E., Max. T.A., 1980. Evaluation of the two methods for cubic-volume prediction of loblolly pine to any merchantable limit. For. Sci., 26: 71-80.
  7. Clark, A., Souther, R.A., Schlaegel, B.E., 1991. Stem Profile Equations for Southern Tree Species. USDA For. Serv., Res. Pap., SE-282. Claughton-Wallin, H., McVicker, F., 1920. The Jonson “absolute form quotient” as an expression of taper. Journal of Forestry 18: 346-357.
  8. Clutter, J.L., 1980. Development of taper functions from variable-top merchantable volume equations. For. Sci., 26:117-120.
  9. Fang, Z., Borders, B.E., Bailey, R.L., 2000. Compatible volume-taper models for loblılly and slash pine based on a system with segmented-stem form factors. forest science, 46(1): 1-11.
  10. Hilt, D.E., 1980. Taper-Based System for Estimating Stem Volumes Ofupland Oaks. USDA Forest Service, Research Paper, NE-458. Honer, T.G., 1967. Standard Volumes and Merchantable Converion Factors for the Commercial Tree Species of Central and Eastern Canada. Forest Management Research and Service Institute, Ottawa, Ontario, Inform Rep., FMR-X-5. Jiang, L., Brooks, J.R., Wang, J., 2005. Compatible taper and volume equations for yellow-poplar in West Virginia. Forest Ecology and Management, 213: 399-409.
  11. Kozak, A., 1988. A Variable exponent taper equation. Canadian Journal of Forest Research, 18: 1363-1368.
  12. Kozak, A., 2004. My last words on taper equa