Journals / Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering / 2023 / Cilt: 24 Sayı: 3

FABRICATION OF A NOVEL FeB-B4C COMPOSITE POWDER AND EVALUATING ITS POTENTIAL FOR ENERGY STORAGE APPLICATIONS

Pages
207–215
Publication Date
2023-09-22
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results obtained indicate the pseudocapacitive behavior of the electrodes with a specific capacitance of 8.28 F/g.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The development of energy storage devices is critical for humanity to declare its independence from fossil fuels.
📊
Key Findings & Data:Herein, for the first time, a novel composite of FeB-B4C powder was synthesized by a one-pot sol-gel technique, and its potential as an active material for electrodes in energy storage devices was investigated.
💡
Conclusion & Impact:The results obtained indicate the pseudocapacitive behavior of the electrodes with a specific capacitance of 8.28 F/g.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Iron boride · Boron carbide · Composite

Abstract

The development of energy storage devices is critical for humanity to declare its independence from fossil fuels. Supercapacitors and batteries are rapidly growing technologies. Nevertheless, their current progress is still insufficient to meet global demand. Therefore, advances in new generation and tailored materials for energy storage applications are urgently needed. Herein, for the first time, a novel composite of FeB-B4C powder was synthesized by a one-pot sol-gel technique, and its potential as an active material for electrodes in energy storage devices was investigated. The phase analysis showed that a composite powder containing 91±5% B4C and 9±5% FeB was obtained without unwanted excess phases such as graphite, boron, or iron oxide. Scanning electron microscopy images of the composite powder revealed the formation of elongated boron carbide particles connected with spherical iron boride ones. The size of the boron carbide particles was found to be in the range of 1 to 10 µm, while the iron boride particles were formed in the submicron range. The synthesized composite's electrochemical properties were investigated using a three-electrode set-up. Cyclic voltammetry (CV) and galvanostatic charge/discharge tests (GCD) were employed. The results obtained indicate the pseudocapacitive behavior of the electrodes with a specific capacitance of 8.28 F/g.

Özet

The development of energy storage devices is critical for humanity to declare its independence from fossil fuels. Supercapacitors and batteries are rapidly growing technologies. Nevertheless, their current progress is still insufficient to meet global demand. Therefore, advances in new generation and tailored materials for energy storage applications are urgently needed. Herein, for the first time, a novel composite of FeB-B4C powder was synthesized by a one-pot sol-gel technique, and its potential as an active material for electrodes in energy storage devices was investigated. The phase analysis showed that a composite powder containing 91±5% B4C and 9±5% FeB was obtained without unwanted excess phases such as graphite, boron, or iron oxide. Scanning electron microscopy images of the composite powder revealed the formation of elongated boron carbide particles connected with spherical iron boride ones. The size of the boron carbide particles was found to be in the range of 1 to 10 µm, while the iron boride particles were formed in the submicron range. The synthesized composite's electrochemical properties were investigated using a three-electrode set-up. Cyclic voltammetry (CV) and galvanostatic charge/discharge tests (GCD) were employed. The results obtained indicate the pseudocapacitive behavior of the electrodes with a specific capacitance of 8.28 F/g.

🔖

Cite This Article

AVCIOĞLU, S. (2023). FABRICATION OF A NOVEL FeB-B4C COMPOSITE POWDER AND EVALUATING ITS POTENTIAL FOR ENERGY STORAGE APPLICATIONS. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, Cilt: 24 Sayı: 3, 207–215. https://ajindex.com/articles/962791

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Zandalinas SI, Fritschi FB, Mittler R. Global Warming, Climate Change, and Environmental Pollution: Recipe for a Multifactorial Stress Combination Disaster. Trends in Plant Science 2021;26(6):588–99
  2. Simons S, Schmitt J, Tom B, Bao H, Pettinato B, Pechulis M. Chapter 10 - Advanced concepts. In: Brun K, Allison T, Dennis R (editors). Thermal, mechanical, and hybrid chemical energy storage systems. London: Academic Press, an imprint of Elsevier; 2021. p. 569–96
  3. Olabi AG, Abbas Q, Al Makky A, Abdelkareem MA. Supercapacitors as next generation energy storage devices: Properties and applications. Energy 2022;248:123617
  4. Sanger A, Kumar A, Kumar A, Jain PK, Mishra YK, Chandra R. Silicon Carbide Nanocauliflowers for Symmetric Supercapacitor Devices. Ind. Eng. Chem. Res. 2016;55(35):9452–8
  5. Liu W, Soneda Y, Kodama M, Yamashita J, Hatori H. Low-temperature preparation and electrochemical capacitance of WC/carbon composites with high specific surface area. Carbon 2007;45(14):2759–67
  6. Halim J, Kota S, Lukatskaya MR, Naguib M, Zhao M-Q, Moon EJ, Pitock J, Nanda J, May SJ, Gogotsi Y, Barsoum MW. Synthesis and Characterization of 2D Molybdenum Carbide (MXene). Adv. Funct. Mater. 2016;26(18):3118–27
  7. Shiota I, Miyamoto Y (editors). Functionally grated materials 1996. Amsterdam: Elsevier; 1997
  8. Avcıoğlu S, Kaya F, Kaya C. Morphological evolution of boron carbide particles: Sol-gel synthesis of nano/micro B4C fibers. Ceramics International 2021;47(19):26651–67
  9. Song S, Yu L, Ruan Y, Sun J, Chen B, Xu W, Zhang J-G. Highly efficient Ru/B4C multifunctional oxygen electrode for rechargeable Li O2 batteries. Journal of Power Sources 2019;413:11–9
  10. Song S, Xu W, Zheng J, Luo L, Engelhard MH, Bowden ME, Liu B, Wang C-M, Zhang J-G. Complete Decomposition of Li2CO3 in Li-O2 Batteries Using Ir/B4C as Noncarbon-Based Oxygen Electrode. Nano Lett 2017;17(3):1417–24
  11. Song N, Gao Z, Zhang Y, Li X. B4C nanoskeleton enabled, flexible lithium-sulfur batteries. Nano Energy 2019;58:30–9
  12. Wang H, Ma C, Yang X, Han T, Tao Z, Song Y, Liu Z, Guo Q, Liu L. Fabrication of boron-doped carbon fibers by the decomposition of B4C and its excellent rate performance as an anode material for lithium-ion batteries. Solid State Sciences 2015;41:36–42
  13. Luo W-B, Chou S-L, Wang J-Z, Liu H-K. A B 4 C nanowire and carbon nanotube composite as a novel bifunctional electrocatalyst for high energy lithium oxygen batteries. J. Mater. Chem. A 2015;3(36):18395–9.