Journals / Çukurova Üniversitesi Mühendislik Fakültesi dergisi / 2023 / Cilt: 38 Sayı: 2

Determination of Optimum pH and NH3 Concentration of Malachite Ore for NH3/NH4NO3 Leaching by Response Surface Method to Produce Cu/Zn Oxide Binary Catalyst

Cu/Zn Oksit İkili Katalizörü Üretmek Amacıyla Malahit Cevherinin NH3/NH4NO3 Liçinde Optimum pH ve NH3 Derişiminin Yanıt Yüzey Yöntemiyle Belirlenmesi

Pages
333–345
Publication Date
2023-07-28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The composition of the catalyst was approximately 44% copper oxide and 56% zinc oxide by weight.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, a Cu/Zn oxide binary catalyst was produced by hydrometallurgical processing of copper ore containing a hydroxy-carbonate mineral malachite and a carbonate mineral smithsonite.
📊
Key Findings & Data:NH3 concentration was found to be more effective on copper and zinc leaching than the pH.
💡
Conclusion & Impact:The composition of the catalyst was approximately 44% copper oxide and 56% zinc oxide by weight.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Malahit · Liç · Yanıt yüzey yöntemi

Abstract

In this work, a Cu/Zn oxide binary catalyst was produced by hydrometallurgical processing of copper ore containing a hydroxy-carbonate mineral malachite and a carbonate mineral smithsonite. The aim was to ascertain the pH and the solvent concentration that will lead to maximum copper and minimum zinc leaching ratios but prevent the dissolution of the other metals present in the ore. Optimum values of pH and solvent concentration were determined by the response surface method. Multiple regression analysis was applied to the experimental results and second order model equations, showing the relationship between the responses representing copper and zinc leaching ratios and independent variables, were obtained. NH3 concentration was found to be more effective on copper and zinc leaching than the pH. Optimum values for NH3 and NH4NO3 concentrations and pH were found to be 0.38 M, 0.11 M, and 9.80, respectively. Under optimum conditions, 82.3% of copper and 45.1% of zinc was leached from the malachite ore. Cu2+ and Zn2+ ions in the solution obtained as a result of leaching were precipitated with Na2CO3 solution and the solid product was calcined at 350 °C for 6 hours to produce a Cu/Zn oxide binary catalyst. The composition of the catalyst was approximately 44% copper oxide and 56% zinc oxide by weight.

Özet

Bu çalışmada, bir hidrosikarbonat minerali olan malahit ve bir karbonatlı mineral olan simitsonit içeren bakır cevherinin hidrometalurjik yöntemle işlenmesi neticesinde Cu/Zn oksit ikili katalizörü üretilmiştir. Cevherden maksimum oranda bakır ve minimum oranda çinkonun liç çözeltisine geçmesini sağlayacak ancak cevherde bulunan diğer metallerin çözünmesini engelleyecek pH ve çözücü derişiminin optimum değerleri yanıt yüzey yöntemi ile belirlenmiştir. Yanıt yüzey yönteminde elde edilen deneysel bulgulara çoklu regresyon analizi yapılarak bakır ve çinko liç verimleri ile bağımsız değişkenler arasındaki ilişkiyi gösteren ikinci dereceden model denklemler elde edilmiştir. Bakır ve çinko liç verimi üzerine NH3 derişiminin pH’dan daha etkili bir parametre olduğu belirlenmiştir. NH3 ve NH4NO3 derişimleri ile pH için optimum değerler sırasıyla 0,38 M, 0,11 M ve 9,80 olarak bulunmuştur. Optimum koşullarda cevherdeki bakırın %82,3’ünün çinkonun ise %45,1’inin çözeltiye geçtiği belirlenmiştir. Liç sonucunda elde edilen çözeltideki Cu+2 ve Zn+2 iyonları Na2CO3 çözeltisi ile çöktürülmüş ve oluşan katı ürün 350 °C’de 6 saat süreyle kalsine edilerek Cu/Zn oksit ikili katalizörü üretilmiştir. Katalizörün ağırlıkça bakır oksit içeriği yaklaşık %44 ve çinko oksit içeriği %56 olarak tespit edilmiştir.

🔖

Cite This Article

KARACAHAN, Z. B., DEMİRKIRAN, N., BAYSAR, A. (2023). Determination of Optimum pH and NH3 Concentration of Malachite Ore for NH3/NH4NO3 Leaching by Response Surface Method to Produce Cu/Zn Oxide Binary Catalyst. Çukurova Üniversitesi Mühendislik Fakültesi dergisi, Cilt: 38 Sayı: 2, 333–345. https://ajindex.com/articles/956502

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Aslan, G., 2005. Metal Oksitler ile İyileştirilmiş Alkan Dehidrojenasyon İkili Katalizörlerinin Hazırlanması ve Tanımlanması. Yüksek Lisans Tezi, İstanbul Üniversitesi Fen Bilimleri Enstitüsü, Kimya Mühendisliği Anabilim Dalı, 69
  2. Baysar, A., 1985. In Situ FTIR Spectroscopy of Adsorbed Species on Mixed Metal Oxide Catalysts for Higher Alcohol Synthesis. M. Sc. Thesis, Iowa State University, Graduate Collage, Ames, Iowa, USA, 202
  3. Mota, N., Guil-Lopez, R., Pawelec, B.G., Fierro, L.G., Navarro, R.M., 2018. Highly Active Cu/ZnO-Al Catalyst for Methanol Synthesis: Effect of Aging on its Structure and Activity. Royal Society of Chemistry Advances, 8(37), 20619-20629
  4. Aydoğan, S., Aras, A., Canbazoğlu, M., 2005a. Dissolution Kinetics of Sphalerite in Acidic Ferric Chloride Leaching. Chemical Engineering Journal, 114(1-3), 67-72
  5. Ekmekyapar, A., Aktaş, E., Künkül, A., Demirkıran, N., 2012. Investigation of Leaching Kinetics of Copper from Malachite Ore in Ammonium Nitrate Solutions. Metallurgical and Materials Transactions B., 43(4), 764-772
  6. Habashi, F., 1997. Handbook of Extactive Metallurgy. Wiley Company, Weinheim, Germany, 1228
  7. Long, X., Chen, Y., Chen, J., Xu, Z., Liu, Q., Du, Z., 2016. The Effect of Water Molecules on the Thiol Collector Interaction on the Galena (Pbs) and Sphalerite (Zns) Surfaces: A DFT study. Applied Surface Science, 389, 103-111
  8. Faris, N., Ram, R., Chen, M., Tardio, J., Pownceby, M. I., Jones, L., McMaster, S., Webster, N.A.S, Bhargava, S., 2017. The Effect of Thermal Pre-Treatment on the Dissolution of Chalcopyrite (Cufes2) in Sulfuric Acid Media. Hydrometallurgy, 169, 68-78
  9. Liu, H., Xia, J., Nie, Z, Liu, L., Wang, L, Ma, C., Zheng, L., Zhao, Y., Wen, W., 2017. Comparative study of S, Fe and Cu Speciation Transformation During Chalcopyrite Bioleaching by Mixed Mesophiles and Mixed Thermophiles. Minerals Engineering. 106, 22-32
  10. Zhang, Y., Deng, J., Chen, J., Yu, R., Xing, X., 2013. Leaching of Zinc from Calcined Smithsonite Using Sodium Hydroxide. Hydrometallurgy, 131-132, 89-92
  11. Ekmekyapar, A., Demirkıran, N., Künkül, A., Aktaş, E., 2015. Leaching of Malachite Ore in Ammonium Sulfate Solutions and Production of Copper Oxide. Brazilian Journal of Chemical Engineering, 32(1), 155-165
  12. Tanaydın, M.K., Bakıcı Tanaydın, Z., Demirkıran, N., 2021. Determination of Optimum Process Conditions by Central Composite Design Method and Examination of Leaching Kinetics of Smithsonite Ore using Nitric Acid S