SavedAdd your journal

Journals / Düzce Üniversitesi Bilim ve Teknoloji Dergisi / 2023 / Cilt: 11 Sayı: 3

Investigation of Cutting Performance of Nano/Layered Hard Coatings in Face Milling of AISI D2 Steel

AISI D2 Çeliğinin Yüzey Frezelemesinde Nano/Tabakalı Sert Kaplamaların Kesme Performansının İncelenmesi

Bilal KURŞUNCU
Pages
1206–1217
Publication Date
2023-07-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Using a nano-layer AlTiN / TiN hard-coating, cutting-force values were lowered in all experiments.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the die-molding industry, milling steels in a hardened condition is common.
📊
Key Findings & Data:The cutting performance of nano-layered AlTiN/TiN coated carbide cutting-tools in AISI D2 face-milling was evaluated in this work.
💡
Conclusion & Impact:Using a nano-layer AlTiN / TiN hard-coating, cutting-force values were lowered in all experiments.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Tool wear · Cutting-force · Hardened steel

Abstract

In the die-molding industry, milling steels in a hardened condition is common. Tool wear and cutting-forces occurring during this process must be considered for better surface quality. The cutting performance of nano-layered AlTiN/TiN coated carbide cutting-tools in AISI D2 face-milling was evaluated in this work. Single-layer hard-coated carbide cutting-tools and uncoated cutting-tools were used to compare cutting performance testing. All cutting-speeds nano-layer AlTiN/TiN coated carbide cutting tool presented longer cutting-length than TiAlN and TiN coated ones and uncoated tool. Notch wear is an overriding wear mechanism, followed by build-up edge formation for all cutting-tools. Using a nano-layer AlTiN / TiN hard-coating, cutting-force values were lowered in all experiments.

Özet

Kalıp döküm endüstrisinde, çeliklerin sertleştirilmiş durumda frezelenmesi yaygındır. Daha iyi bir yüzey kalitesi için bu işlem sırasında oluşan takım aşınması ve kesme kuvvetleri dikkate alınmalıdır. Bu çalışmada, nano katmanlı AlTiN/TiN kaplı karbür kesici takımların AISI D2 yüzey frezelemede kesme performansı incelenmiştir. Kesme performansı karşılaştırmak için tek katmanlı sert kaplamalı karbür kesici takımlar ve kaplamasız kesici takımlar kullanılmıştır. Tüm kesme hızlarında, nano katmanlı AlTiN/TiN kaplı karbür kesici takım, TiAlN ve TiN kaplı olanlardan ve kaplamasız takımdan daha uzun takım ömrü sergilemiştir. Tüm kesici takımlarda çentik aşınması ve yığma kenar oluşumu etkin aşınmaları olduğu görülmüştür. Tüm parametrelerde nano katmanlı AlTiN/TiN sert kaplamalar kullanılarak daha düşük kesme kuvveti değerleri ölçülmüştür.

🔖

Cite This Article

KURŞUNCU, B. (2023). Investigation of Cutting Performance of Nano/Layered Hard Coatings in Face Milling of AISI D2 Steel. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Cilt: 11 Sayı: 3, 1206–1217. https://ajindex.com/articles/955165

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. L. Smith and P. Ball, “Steps towards sustainable manufacturing through modelling material, energy and waste flows,” Int. J. Prod. Econ., vol. 140, no. 1, pp. 227–238, 2012, doi: 10.1016/j.ijpe.2012.01.036
  2. P. Krajnik, F. Pusavec, and A. Rashid, “Nanofluids: properties, applications and sustainability aspects in materials processing technologies BT - advances in sustainable manufacturing: Proceedings of the 8th Global Conference on Sustainable Manufacturing,” G. Seliger, M. M. K. Khraisheh, and I. S. Jawahir Eds. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011, pp. 107–113
  3. P. Krajnik, F. Pusavec, and A. Rashid, “Nanofluids: properties, applications and sustainability aspects in materials processing technologies BT - advances in sustainable manufacturing: Proceedings of the 8th Global Conference on Sustainable Manufacturing,” G. Seliger, M. M. K. Khraisheh, and I. S. Jawahir Eds. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011, pp. 107–113
  4. B. Kursuncu and A. Yaras, “AISI O2 takım çeliğinin frezelenmesinde minimum miktarda yağlama (MQL) sisteminin kesme performansına e,tkisi,” Mühendislik ve Teknol. Bilim. Derg., vol. 5, no. 2, pp. 125–128, 2018
  5. B. Kursuncu and A. Yaras, “AISI O2 takım çeliğinin frezelenmesinde minimum miktarda yağlama (MQL) sisteminin kesme performansına e,tkisi,” Mühendislik ve Teknol. Bilim. Derg., vol. 5, no. 2, pp. 125–128, 2018
  6. Caliskan, H., Kursuncu, B., Guven, S. Y., Karaoglanli, A. C., Sabri Gok, M., & Alsaran, A. “Effect of boron nitride coating on wear behavior of carbide cutting tools in milling of Inconel 718,” in Machining, Joining and Modifications of Advanced Materials, Singapore: Springer, 2016, pp. 13-21
  7. Caliskan, H., Kursuncu, B., Guven, S. Y., Karaoglanli, A. C., Sabri Gok, M., & Alsaran, A. “Effect of boron nitride coating on wear behavior of carbide cutting tools in milling of Inconel 718,” in Machining, Joining and Modifications of Advanced Materials, Singapore: Springer, 2016, pp. 13-21
  8. B. Kursuncu and A. Yaras, “Assessment of the effect of borax and boric acid additives in cutting fluids on milling of AISI O2 using MQL system,” Int. J. Adv. Manuf. Technol., vol. 95, no. 5, pp. 2005–2013, 2018
  9. B. Kursuncu and A. Yaras, “Assessment of the effect of borax and boric acid additives in cutting fluids on milling of AISI O2 using MQL system,” Int. J. Adv. Manuf. Technol., vol. 95, no. 5, pp. 2005–2013, 2018
  10. M. Kunca, K. Kaplan, H. M. Ertunç, and S. Küçükateş, “5 Axis C