Journals / Scientific Mining Journal / 2018 / Cilt: 57 Sayı: 2

DENİZLİ MOLAS HAVZASINDA BULUNAN SEDİMANTER KAYAÇLARIN CERCHAR VE SHORE SERTLİKLERİNİN TAYİNİ VE BULANIK MANTIK UYGULAMASI

Pages
71–79
Publication Date
2018-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Bu çalışmada, Denizli ilinin Molas havzasında yapılan iki adet sondaj kuyusundan elde edilen

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Bu çalışmada, Denizli ilinin Molas havzasında yapılan iki adet sondaj kuyusundan elde edilen
📊
Key Findings & Data:Bu çalışmada, Denizli ilinin Molas havzasında yapılan iki adet sondaj kuyusundan elde edilen
💡
Conclusion & Impact:Bu çalışmada, Denizli ilinin Molas havzasında yapılan iki adet sondaj kuyusundan elde edilen
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Cerchar aşındırıcılık indeksi · Shore sertliği · Bulanık mantık

Özet

Bu çalışmada, Denizli ilinin Molas havzasında yapılan iki adet sondaj kuyusundan elde edilen

🔖

Cite This Article

DOĞRUÖZ, C. (2018). DENİZLİ MOLAS HAVZASINDA BULUNAN SEDİMANTER KAYAÇLARIN CERCHAR VE SHORE SERTLİKLERİNİN TAYİNİ VE BULANIK MANTIK UYGULAMASI. Scientific Mining Journal, Cilt: 57 Sayı: 2, 71–79. https://ajindex.com/articles/953841

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Al-Ameen, S., Waller, M., 1994. The Influence of Rock Strength and Abrasive Mineral Content on the Cerchar Abrasive Index. Eng. Geol., 36, 293–301.
  2. Alber, M., 2008. Stress Dependency of the Cerchar Abrasivity Index (CAI) and Its Effects on Wear of Selected Rock Cutting Tools. Tunn. Undergr. Space Technol., 23, 351–359.
  3. Alvarez Grima, M., Babuska, R., 1999. Fuzzy Model for the Prediction of Unconfined Compressive Strength of Rock Samples. International Journal of Rock Mechanics and Mining Science, 36, 339–349.
  4. Atkinson, T., Cassapi, V.B., Singh, R.N., 1986. Assessment of Abrasive Wear Resistance Potential in Rock Excavation Machinery. International Journal of Mining and Geological Engineering, Technical Note, 3, 151-163.
  5. Bölükbaşı, N., 1986. Yeraltı Kömür ve Ayak Kazı Mekanizasyonu. TKİ Genel Müdürlüğü Seminerleri No.4, Mining Eng.Dept. METU, Ankara. Cerchar, 1986. Centre d’Etudes et Recherches de Charbonnages de France. The CERCHAR abrasiveness index, Verneuil 12S. Dahl, F., Bruland, A., Jakobsen, P.D., Nilsen, B., Grov, E., 2012. Classifications of Properties Influencing the Drillability of Rocks, Based on the NTNU/SINTEF Test Method. Tunn Undergr Space Technol, 28, 150–158.
  6. Finol, J., Guo, Y. K., Jing, X. D., 2001. A Rule Based Fuzzy Model for the Prediction of Petrophysical Rock Parameters. Journal of Petroleum Science and Engineering, 29, 97–113.
  7. Gokceoglu, C., 2002. A Fuzzy Triangular Chart to Predict the Uniaxial Compressive Strength of Ankara Agglomerates from Their Petrographic Composition. Engineering Geology, 66, 39-51.
  8. Hamzaban, M.T., Memariana, H., Rostami, J., 2013. Continuous Monitoring of Pin Tip Wear and Penetration Into Rock Surface Using a New Cerchar Abrasivity Testing Device. Rock Mech Rock Eng. ISRM, 2007. The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring, International Society for Rock Mechanics and Rock Engineering. Kasling, H., Thuro, K., 2010. Determining Abrasivity of Rock and Soil in the Laboratory. In: 11th IAEG Congress, Auckland, New Zealand, 235. Michalakopoulos, T., Anagnostou, V., Bassanou, M., Panagiotou, G., 2006. The Influence of Steel Styli Hardness on the Cerchatr Abrasiveness Index Value. Int J Rock Mech Min Sci, 43, 321- 327. Plinninger, R., Kasling, H., Thuro, K., Spaun, G., 2003. Testing Conditions and Geomechanical Properties Influencing the Cerchar Abrasiveness Index (CAI) Value. Int J Rock Mech Min Sci, 40, 259-263.
  9. Plinninger, R., Kasling, H., Thuro, K., 2004. Wear Prediction in Hardr