Journals / Scientific Mining Journal / 2022 / Cilt: 61 Sayı: 1

A study on effect of modified calcite on filler retention and mechanical properties of fluting papers

A study on effects of modified calcite on filler retention and mechanical properties of fluting papers

Pages
13–18
Publication Date
2022-03-07
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Besides, impurities in white water can be minimized by reducing the filler dosage given during paper production.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the use of modified calcite as a filler in fluting paper production was investigated and its effect on retention and some mechanical properties of papers was investigated.
📊
Key Findings & Data:According to the study's findings, the use of 10% MC improved filler retention and provided approximately 23% more retention than the use of 10% UC.
💡
Conclusion & Impact:Besides, impurities in white water can be minimized by reducing the filler dosage given during paper production.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kalsit · Nişasta · Modifikasyon

Abstract

In this study, the use of modified calcite as a filler in fluting paper production was investigated and its effect on retention and some mechanical properties of papers was investigated. Ground calcium carbonate (GCC/calcite) and cationic starch were used for modification. Filler modification with alum effect of CPAM resulted in starch-calcite encapsulation. Produced modified calcite (MC) was used in fluting paper production at certain dosages. Simultaneously, paper was made with unmodified calcite (UC), and the effects of modified calcite on paper properties and filler retention were studied. According to the study's findings, the use of 10% MC improved filler retention and provided approximately 23% more retention than the use of 10% UC. In addition, mechanical properties and air permeability values of MC-filled papers were higher than UC-filled papers. With the use of MC in fluting papers, better filler retention was achieved, while the reduction in mechanical properties caused by the addition of filler in general can be minimized. Besides, impurities in white water can be minimized by reducing the filler dosage given during paper production.

Özet

Bu çalışmada, modifiye kalsitin fluting kağıdı üretiminde dolgu maddesi olarak kullanımı araştırılmış ve kağıtların tutunuma ve bazı mekanik özelliklerine etkisi araştırılmıştır. Modifikasyon için öğütülmüş kalsiyum karbonat (GCC/kalsit) ve katyonik nişasta kullanılmıştır. CPAM'ın şap etkisi ile dolgu modifikasyonu, nişasta-kalsit kapsüllenmesi ile sonuçlanmıştır. Üretilen modifiye kalsit (MC), fluting kağıt üretiminde belirli dozajlarda kullanılmıştır. Aynı zamanda, modifiye edilmemiş kalsit (UC) ile kağıt yapılmış ve modifiye kalsitin kağıt özellikleri ve dolgu retansiyonu üzerindeki etkileri araştırılmıştır. Çalışmanın bulgularına göre %10 MC kullanımı dolgu retansiyonunu iyileştirmiş ve %10 UC kullanımına göre yaklaşık %23 daha fazla tutunma sağlamıştır. Ayrıca MC dolgulu kağıtların mekanik özellikleri ve hava geçirgenlik değerleri UC dolgulu kağıtlardan daha yüksek çıkmıştır. Fluting kağıtlarında MC kullanımı ile daha iyi dolgu tutunumu elde edilirken, genel olarak dolgu ilavesinin neden olduğu mekanik özelliklerdeki azalma en aza indirilebilir. Ayrıca kağıt üretimi sırasında verilen dolgu dozajı azaltılarak beyaz sudaki kirlilikler en aza indirilebilir.

🔖

Cite This Article

SÖZBİR, T., ÇİÇEKLER, M. (2022). A study on effect of modified calcite on filler retention and mechanical properties of fluting papers. Scientific Mining Journal, Cilt: 61 Sayı: 1, 13–18. https://ajindex.com/articles/953752

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Andersson, L., Ridgway, C.J., Gane, P.A.C. 2013. Defining the mechanism of sizepress starch penetration in filled unsized fibrous products - A traditional technology revisited. Nordic Pulp and Paper Research Journal. 28(4), 547–558.
  2. Bajpai, P. 2018. Biermann's Handbook of Pulp and Paper. Academic Press, London. 273-281.
  3. Beazley, K. 1991. Mineral fillers in paper. The Paper Conservator, 15(1), 17–27.
  4. Cadotte, M., Tellier, M.E., Blanco, A., Fuente, E., Van De Ven, T. GM., Paris, J. 2007. Floculation, retention and drainage in papermaking: A comparative study of polymeric additives. Canadian Journal of Chemical Engineering. 85(2), 240–248.
  5. Cao, S., Song, D., Deng, Y., Ragauskas, A. 2011. Preparation of starch-fatty acid modified clay and its application in packaging papers. Industrial and Engineering Chemistry Research. 50(9), 5628–5633.
  6. Chen, N., Wang, L., Wen, J., Yao, X., Zhao, W. 2020. Filler modified by a sequential encapsulation and preflocculation method and its effect on paper properties. Nordic Pulp and Paper Research Journal. 35(1), 89–95.
  7. Cicekler, M., Tutus, A. 2021. Effects of cellulase enzyme in deinking of Solvent-Based inks from mixed office wastes. Biocatalysis and Biotransformation. 39(2), 152–160.
  8. Fahmy, T.Y.A., Mobarak, F. 2008. Nanocomposites from natural cellulose fibers filled with kaolin in presence of sucrose. Carbohydrate Polymers. 72(4), 751–755.
  9. Fan, J., Li, T., Ren, Y., Qian, X., Wang, Q., Shen, J., Ni, Y. 2017. Interaction between two oppositely charged starches in an aqueous medium containing suspended mineral particles as a basis for the generation of cellulose-compatible composites. Industrial Crops and Products. 97, 417–424.
  10. Fatehi, P., Hamdan, F.C., Ni, Y. (2013). Adsorption of lignocelluloses of pre-hydrolysis liquor on calcium carbonate to induce functional filler. Carbohydrate Polymers. 94(1), 531–538.
  11. Fellers, C., Östlund, S., Mäkelä, P. 2012. Evaluation of the Scott bond test method. Nordic Pulp & Paper Research Journal. 27(2), 231–236.
  12. Geng, C., Ma, T., Liu, J. 2021. Eco-environmental benefits analysis of EcoPartnerships program of production technology of calcium carbonate from lime mud produced by alkaline papermaking. Environmental Progress and Sustainable Energy. https://doi.org/10.1002/ep.13697
  13. Gigac, J., Kuna, V., & Schwartz, J. 1995. Effects of fibers and fillers on the optical and mechanical characteristics of paper. Tappi Journal. 78(2), 162–167.
  14. Hubbe, M.A., Gill, R.A. 2016. Fillers for papermaking: A review