SavedAdd your journal

Journals / International Scientific and Vocational Studies Journal / 2023 / Cilt: 7 Sayı: 1

Effects of Additives on Concrete-Rebar Adherence

Kemal Tuşat YÜCEL
Kemal Muhammet ERTEN
Pages
47–54
Publication Date
2023-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result of the study, the use of crushed stone aggregate, hyperplasticizer additive, mineral additive and ribbed rebar with 18mm diameter increased the bond strength compared to the reference samples.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In composite reinforced concrete elements formed by concrete and rebar, only if these two materials work together, reinforced concrete elements can fully function.
📊
Key Findings & Data:The significant factor that will ensure working together is the bond strength, which is called adherence.
💡
Conclusion & Impact:As a result of the study, the use of crushed stone aggregate, hyperplasticizer additive, mineral additive and ribbed rebar with 18mm diameter increased the bond strength compared to the reference samples.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Concrete · Concrete-Rebar Adherence · Mineral Additive

Abstract

In composite reinforced concrete elements formed by concrete and rebar, only if these two materials work together, reinforced concrete elements can fully function. The significant factor that will ensure working together is the bond strength, which is called adherence. The higher the value of this force, the harder the rebar is to pull out from the concrete. In this experimental study, the effect of concrete additives and aggregate type on the bond strength and the amount of elongation of the reinforcement without stripping from the concrete was investigated. For this purpose, 28-day compressive strength and adherence force and reinforcement elongation amounts of the concrete mixtures produced by using mineral, chemical and fiber additives for two different aggregate series, crushed stone and gravel, and two different cement dosages, were observed. In addition, by using 3 different rebar in terms of diameter and surface properties, the effect of these properties on concrete-rebar adherence was revealed. As a result of the study, the use of crushed stone aggregate, hyperplasticizer additive, mineral additive and ribbed rebar with 18mm diameter increased the bond strength compared to the reference samples.

Özet

In composite reinforced concrete elements formed by concrete and rebar, only if these two materials work together, reinforced concrete elements can fully function. The significant factor that will ensure working together is the bond strength, which is called adherence. The higher the value of this force, the harder the rebar is to pull out from the concrete. In this experimental study, the effect of concrete additives and aggregate type on the bond strength and the amount of elongation of the reinforcement without stripping from the concrete was investigated. For this purpose, 28-day compressive strength and adherence force and reinforcement elongation amounts of the concrete mixtures produced by using mineral, chemical and fiber additives for two different aggregate series, crushed stone and gravel, and two different cement dosages, were observed. In addition, by using 3 different rebar in terms of diameter and surface properties, the effect of these properties on concrete-rebar adherence was revealed. As a result of the study, the use of crushed stone aggregate, hyperplasticizer additive, mineral additive and ribbed rebar with 18mm diameter increased the bond strength compared to the reference samples.

🔖

Cite This Article

YÜCEL, K. T., ERTEN, K. M. (2023). Effects of Additives on Concrete-Rebar Adherence. International Scientific and Vocational Studies Journal, Cilt: 7 Sayı: 1, 47–54. https://ajindex.com/articles/952382

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Camacho, R. E. R., Afif, R. U. (2002). Importance of using the natural pozzolans on concrete durability. Cement and Concrete Research, 32, 1851-1858
  2. Pereira, P., Evengelista, L., Brito, J. D. (2012). The effect of superplasticisers on the workability and compressive strength of concrete made with fine recycled concrete aggregates. Construction and Building Materials, 28, 722-729. doi:10.1016/j.conbuildmat.2011.10.050 [3] Abdalla, L. B., Ghafor, K., Mohammed, A. (2019). Testing and modeling the young age compressive strength for high workability concrete modified with PCE polymers. Results in Materials, 1.
  3. Reddy, P. V. R. K., Prasad, D. R. (2022). A study on workability, strength and microstructure characteristics of graphene oxide and fly ash based concrete. Materialstoday: proceedings, 62(6), 2919-2925.
  4. Özel, C., ‘’Katkılı Betonların Reolojik Özelliklerinin Taze Beton Deney Yöntemlerine Göre Belirlenmesi,’’ Doktora Tezi, 249 s., Isparta, 2007
  5. Altun, F., Özcan, D. M., Vekli, M., Karahan, O. (2004). Çelik Lif Katkılı C 20 Betonun Mekanik Özelliklerinin Deneysel Araştırılması. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 4(1), 31-40
  6. Türker, P., Erdoğan, B., Katnaş, F., Yeğinobalı, A. Türkiye’deki Uçucu Küllerin Sınıflandırılması ve Özellikleri. Türkiye Çimento Müstahsilleri Birliği, Ankara
  7. Chen, M., Shen, S. L., Arulrajah, A., Wu, H. N., Hou, D. W., Xu, Y. S., (2015). Laboratory evaluation on the effectiveness of polypropylene fibers on the strength of fiber-reinforced and cement-stabilized Shanghai soft clay. Geotextiles and Geomembranes, 43, 515-523.
  8. Grierson, L., H., Knight, J. C., Maharaj, R., (2005). The role of calcium ions and lignosulphonate plasticiser in the hydration of cement. Cement and Concrete Research, 35, 631-636
  9. Papadakis, V. G., (1999). Experimental investigation and theoretical modeling of silica füme activity in concrete. Cement and Concrete Research, 29, 79-86
  10. Taşdemir, M. A., Bayramov, F. (2002). Yüksek performanslı çimento esaslı kompozitlerin mekanik davranışı. itüdergisi/d mühendislik, 1(2), 125-144
  11. Weyers, M., Kearsley, E. P., ‘’Effect of High Plasticiser Dosage on Ultra High-Performance Fibre Reinforced Concrete (UHPFRC),’’ International Conference on Application of Superabsorbent Polymers & Other New Admixtures Towards S