Crystallite sizes and micro-strain values were calculated with the Scherrer Equation, Williamson-Hall method and Modified Scherrer (Monshi-Scherrer) equation of the compounds obtained at the peak points in XRD analysis.
📌 3 Key Takeaways
🎯
Objective & Hypothesis:Iron-based, nickel-based, and cobalt-based superalloys are the three types of superalloys utilized in high-temperature applications.
📊
Key Findings & Data:Inconel 601 is a nickel-based superalloy that's used especially in aerospace, heat treatment, and gas turbine engine applications.
💡
Conclusion & Impact:Crystallite sizes and micro-strain values were calculated with the Scherrer Equation, Williamson-Hall method and Modified Scherrer (Monshi-Scherrer) equation of the compounds obtained at the peak points in XRD analysis.
Iron-based, nickel-based, and cobalt-based superalloys are the three types of superalloys utilized in high-temperature applications. Inconel 601 is a nickel-based superalloy that's used especially in aerospace, heat treatment, and gas turbine engine applications. In this study, thermal barrier coating (TBC) was applied approximately at 100, 200 and 300 μm ceramic top coating thicknesses and X-Ray Diffraction (XRD) analyzes were performed. NiCrAlY metallic powder was used for bond coating and 8% YSZ ceramic powder was used for ceramic top coating. Crystallite sizes and micro-strain values were calculated with the Scherrer Equation, Williamson-Hall method and Modified Scherrer (Monshi-Scherrer) equation of the compounds obtained at the peak points in XRD analysis.
ERDOĞAN, N. N., BAŞYİĞİT, A. B. (2023). AN APPROACH ON DETERMINING MICRO-STRAIN AND CRYSTALLITE SIZE VALUES OF THERMAL SPRAY BARRIER COATED INCONEL 601 SUPER ALLOY. The International Journal of Materials and Engineering Technology, Cilt: 6 Sayı: 1, 21–25. https://ajindex.com/articles/946879
Çay, V.V., Ozan, S., Süperalaşımlar ve Uygulama Alanları, Doğu Anadolu Bölgesi Araştırmaları, 2005, 3(2):178-188
Akça, E., Gürsel, A., A Review on Superalloys and IN718 Nickel-Based Inconel Superalloy, Periodicals of Engineering and Natural Sciences, 2015, 3(1) Atmaca, E.S., Inconel 718 Süperalaşımının PVD Yöntemi ile AlTiN ve CrN Kaplanması ve Karakterize Edilmesi, Gazi Üniversitesi,
Metalurji ve Malzeme Anabilim Dalı, Yüksek Lisans Tezi, Nisan 2015
Reed, R.C., The Superalloys Fundamentals and Applications, Cambridge University Press, 2006, 1-28
Donachie, M.J., and Donachie, S.J., Superalloys A Technical Guide, Second Edition, ASM International, 2002, 25-39
Watson, J.E., Superalloys, Production, Properties and Applications, Nova Science Publishers, Inc. New York, 2011, 25-44
Heubner, U., Nickel Alloys, CRC Press Taylor & Francis Group, Germany, 2018, 129-160 ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys, 2000, 9-54, 287 Galetz, M.C., Coatings on Superalloys, Superalloys, Coatings for Superalloys, InTech, 2015
Doherty, R.D., Hughes, D.A., Humphreys, F.J., Jonas, J.J., Jensen, D.J., Kassner, M.E., King, W.E., McNelley, T.R., McQueen, H.J., Rollett, A.D., Current issues in recrystallization: A review, Materials Science and Engineering: A. 1997, 238(2):219–274
Allen, S., and Thomas, E., The Structure of Materials. New York: John Wiley & Sons, Inc. 1999
Mateus, D., et. al., Crystallite Size and Micro-strain evolution in TiN Thin Films, Entre Ciencia E Ingenieria, WOS:000420316600007, 2011, 9:94-106
Augustin, A., et. al., Crystallite Size Measurement and Micro-strain Analysis of Electrodeposited Copper Thin Film using Williamson-Hall Method, International Conference on Condensed Matter and Applied Physics, Proceedings Paper, 2016, 1728 Pilliadugula, R., Gopalakrishnan, N., Crystallite size and micro-strain investigations of hydrothermally synthesized beta-Ga2O3 by different analytical methods, Functional Materials Letters, 2020, 13(5) Jamail, H., Razavi, R.S., Investigation of Thermal Shock Behavior of Plasma-Sprayed NiCoCrAlY/YSZ Thermal Barrier Coatings, Advanced Materials Research, 2012, 472-475:246-250
Loghman-Estarki, M.R., Nejati, M., Edris, H., Razavi, R.S., Jamali, H., Pakseresht, A.H., Evaluation of hot corrosion behavior of plasma sprayed scandia and yttriaco-stabilized nanostructured thermal barrier coatings in the presence of molten sulfate and vanadate salt, Journal of the European Ceramic Society 35, 2015, 693–702