SavedAdd your journal

Journals / Sakarya University Journal of Science / 2017 / Cilt: 21 Sayı: 2

The Production and characterization of tin (II) oxide composite anode electrodes for lithium ion batteries

Lityum iyon piller için kalay (II) oksit kompozit anot elektrotlarının üretimi ve karakterizasyonu

Mehmet Oğuz Güler
Pages
150–156
Publication Date
2017-04-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results have shown that tin (II) oxide/carbon composite structure have significantly improved the specific capacities to 396 mAh g-1 after 100 cycles.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the core component of the composite, tin (II) oxide powders synthesized through a facile chemical reduction methods for Li-ion batteries.
📊
Key Findings & Data:CR2016 type coin cells were prepared by using tin (II) oxide/carbon composite powders and electrochemical tests were performed at room temperature via 8-channel MTI BST8‒MA electrochemical test station between 10 mV and 2.5 V potential range by applying fixed 1 C state of charge conditions.
💡
Conclusion & Impact:The results have shown that tin (II) oxide/carbon composite structure have significantly improved the specific capacities to 396 mAh g-1 after 100 cycles.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kalay (II) oksit · çekirdek/kabuk · kimyasal indirgeme

Abstract

In this study, the core component of the composite, tin (II) oxide powders synthesized through a facile chemical reduction methods for Li-ion batteries. As the shell structure, surfaces of the as-synthesized tin (II) oxide particles were coated with carbon through microwave assisted carburization process. The surface morphologies and phase components of the as-synthesized tin (II) oxide/carbon composites were investigated via scanning electron microscopy and X-ray diffraction methods, respectively. CR2016 type coin cells were prepared by using tin (II) oxide/carbon composite powders and electrochemical tests were performed at room temperature via 8-channel MTI BST8‒MA electrochemical test station between 10 mV and 2.5 V potential range by applying fixed 1 C state of charge conditions. The results have shown that tin (II) oxide/carbon composite structure have significantly improved the specific capacities to 396 mAh g-1 after 100 cycles.

Özet

Bu çalışmada Li-iyon piller için uyumlu çekirdek olarak kalay (II) oksit anotlar kimyasal indirgeme yöntemi ile sentezlenmiştir. Karbon esaslı kabuk sentezi için mikrodalga destekli karbürizasyon yöntemi kullanılmış ve SnO tozlarının yüzeylerinde ince amorf bir karbon tabakası elde edilmiştir. Üretilen kalay (II) oksit/karbon kompozit elektrotların yüzey morfolojileri Taramalı Elektron Mikroskobu (SEM) ile analiz edilmiş ve yapıların faz bileşenleri X-Işınları Difraktometresi (XRD) ile karakterize edilmiştir. Üretilen kalay (II) oksit/karbon kompozit tozları kullanılarak hazırlanan elektrotlar ile CR2016 test hücreleri hazırlanmış ve elektrotların elektrokimyasal performansı MTI BST8‒MA 8 kanallı pil test ünitesinde, oda sıcaklığında 10 mV ve 2,5 V arasında sabit 1C şarj/deşarj şartlarında akım verilerek test edilmiştir. Sonuç olarak, kalay (II) oksit/karbon kompozit elektrot malzemeleri ile 100 çevrim sonrasında 396 mAh g-1 deşarj kapasitesi elde edilmiştir.

🔖

Cite This Article

Güler, M. O. (2017). The Production and characterization of tin (II) oxide composite anode electrodes for lithium ion batteries. Sakarya University Journal of Science, Cilt: 21 Sayı: 2, 150–156. https://ajindex.com/articles/942345

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. C. Chen and Y. Tseng, “Cross-interaction in Cu/Sn/Co/Sn/Ni and Cu/Sn–Co/Co/Sn– Co/Ni couples,” J. Electron. Mater., vol. 44, no. 3, pp. 1021-1027, Mar. 2015
  2. X. Li, Y. Zhong, M. Cai, M. Balogh, D. Wang, Y. Zhang, R. Li and X. Sun, “Tin-alloy heterostructures encapsulated in amorphous carbon nanotubes as hybrid anodes in rechargeable lithium ion batteries,” Electrochim. Acta, vol. 89, no. 1, pp. 387-393, Feb. 2013
  3. K. Wang, D. Gan, K. Hsiel and S. Y. Chiou, “The microstructure of η′-Cu6Sn5 and its orientation relationships with Cu in the early stage of growth,” Thin Solid Films, vol. 518, no. 6, pp. 1667-1674, Jan. 2010
  4. A. Yamano, M. Morishita, H. Yamauchi, T. Nagakane, M. Ohji, A. Sakamoto, M. Yanagida and T. Sakai, “Electrochemical and safety performance of Li pre-doping free cell using tin-phosphate glass-silicon composite anode,” J. Power Sources, vol. 292, no. 1, pp. 31-38, Oct. 2015
  5. Y. Idota, T. Kubota, A. Matsufuji, Y. Maekawa and T. Miyasaka, “Tin-based amorphous oxide: a high-capacity lithium-ion-storage material,” Science, vol. 276, no. 5317, pp. 1395-1397, May 1997
  6. J H. Giefers, F. Porsch and W. G., “Kinetics of the disproportionation of SnO,” Solid State Ionics, vol. 176, no. 1-2, p. 199–207, Jan. 2005
  7. J. Chouvin, C. Branci, J. Sarradin, J. Fourcade, J. Jumas, B. Simon and P. Biensan, “Lithium intercalation in tin oxide,” J. Power Sources, vol. 1, no. 1, p. 277–281, Sept. 1999
  8. I. Courtney and J. Dahn, “Electrochemical and In Situ X‐ray diffraction studies of the reaction of lithium with tin oxide composites,” J. Electrochem. Soc., vol. 144, no. 6, pp. 2045-2052, Nov. 1997
  9. D.-S. Wu, C.-Y. Han, S.-Y. Wang, N.-L. Wu and I. Rusakova, “Microwave assisted solution synthesis of SnO nanocrystallites,” Mater. Lett., vol. 53, no. 3, p. 155–159, Mar. 2002
  10. F. Kazumi, N. Chizuko, M. Keizo and M. Shunmei, “Preparation of Tin(II) Oxide by a homogeneous precipitation method,” B. Chem. Soc. Jpn., vol. 63, no. 9, pp. 2718-2720, June 2006
  11. V. Jimenez, A. E. J. Gonzalez-Elipe, A. Justo and A. Fernandez, “Synthesis of SnO and SnO2 nancrystalline powders by the gas phase condensation method,” Sensor. and Actuator., vol. 31, no. 1-2, pp. 29-32, Feb. 1992
  12. K. Amitabh and R. Rustum, “RESA- A wholly new process for fine oxide powder preparation,” J. Mater. Res., vol. 3, no. 6, pp. 1373-1377, Dec. 1988
  13. F. J. E. Pires, R. Savu, M. Zaghate, E. Longo and J. Varela, “Microwave-assisted hydrothermal synthesis of n