SavedAdd your journal

Journals / Sakarya University Journal of Science / 2020 / Cilt: 24 Sayı: 5

Removal of Maxilon Golden Yellow GL EC 400% from the Wastewater by Adsorption Method Using Different Clays

Sevgi GÜNEŞ DURAK
Pages
1081–1093
Publication Date
2020-10-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Different amounts of adsorbents (0.5, 1.0, 1.5 and 2.0 g.) were taken from the samples and according to the results obtained the most color removal clay material and adsorbent amount was found.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:This study was to evaluate the adsorption capability of clay minerals of halloysite, bentonite, kaolinite and natural clay (obtained from the Avanos) to remove Maxilon Golden Yellow GL EC 400% (MGY400) from aqueous solution.
📊
Key Findings & Data:Different amounts of adsorbents (0.5, 1.0, 1.5 and 2.0 g.) were taken from the samples and according to the results obtained the most color removal clay material and adsorbent amount was found.
💡
Conclusion & Impact:According to the results, adsorption kinetics and isotherms were investigated, and evaluation was made for working conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:adsorption · bentonite · clay

Abstract

This study was to evaluate the adsorption capability of clay minerals of halloysite, bentonite, kaolinite and natural clay (obtained from the Avanos) to remove Maxilon Golden Yellow GL EC 400% (MGY400) from aqueous solution. Different amounts of adsorbents (0.5, 1.0, 1.5 and 2.0 g.) were taken from the samples and according to the results obtained the most color removal clay material and adsorbent amount was found. Adsorption was applied on all clays at 25 oC temperature, 200 rpm mixing speed and different contact times (2, 5, 10, 20, 30, 40, 50, 60 min) in the batch reactor. Bentonite provided the highest dyestuff removal. Therefore, the second phase adsorption was continued with bentonite. The adsorption with bentonite were performed at different temperature (13 oC, 25 oC, 50 oC) and pH values (2, 4, 6, 8, 10, 12). When the pH was 12 and the temperature was 25 oC, it was determined that the removal rate of the dyestuff of bentonite reached up to 99.7%. According to the results, adsorption kinetics and isotherms were investigated, and evaluation was made for working conditions.

🔖

Cite This Article

DURAK, S. G. (2020). Removal of Maxilon Golden Yellow GL EC 400% from the Wastewater by Adsorption Method Using Different Clays. Sakarya University Journal of Science, Cilt: 24 Sayı: 5, 1081–1093. https://ajindex.com/articles/941889

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. M. J. Sánchez-Martín, M. C. Dorado, C. del Hoyo, and M. S. Rodríguez-Cruz, “Influence of clay mineral structure and surfactant nature on the adsorption capacity of surfactants by clays,” J. Hazard. Mater., vol. 150, no. 1, pp. 115–123, Jan. 2008, doi: 10.1016/j.jhazmat.2007.04.093. M. Doğan, M. H. Karaoğlu, and M. Alkan, “Adsorption kinetics of maxilon yellow 4GL and maxilon red GRL dyes on kaolinite.,” J. Hazard. Mater., vol. 165, no. 1–3, pp. 1142–51, Jun. 2009, doi: 10.1016/j.jhazmat.2008.10.101. G. Jing, Z. Sun, P. Ye, S. Wei, and Y. Liang, “Clays for heterogeneous photocatalytic decolorization of wastewaters contaminated with synthetic dyes: a review,” Water Pract. Technol., vol. 12, no. 2, pp. 432–443, Jun. 2017, doi: 10.2166/wpt.2017.046. M. Tanyol, “Removal of Remazol Brilliant Blue R from aueous solutions using raw and modified bentonite,” Kafkas Univ. J. Sci., vol. 9, no. 1, pp. 46–52, 2016, Accessed: Jan. 03, 2019. [Online]. Available: http://dergipark.gov.tr/kujs/issue/30865/338477. A. Ghribi and M. Bagane, “Kinetic modeling for the adsorption of methylene blue from aqueous solutions using Tunisian clay,” in IREC2015 The Sixth International Renewable Energy Congress, Mar. 2015, pp. 1–4, doi: 10.1109/IREC.2015.7110940. P. Liu and L. Zhang, “Adsorption of dyes from aqueous solutions or suspensions with clay nano-adsorbents,” Sep. Purif. Technol., vol. 58, no. 1, pp. 32–39, Dec. 2007, doi: 10.1016/J.SEPPUR.2007.07.007. A. Gürses, Ç. Doǧar, M. Yalçin, M. Açikyildiz, R. Bayrak, and S. Karaca, “The adsorption kinetics of the cationic dye, methylene blue, onto clay,” J. Hazard. Mater., vol. 131, no. 1–3, pp. 217–228, Apr. 2006, doi: 10.1016/j.jhazmat.2005.09.036. S. S. Tahir and N. Rauf, “Removal of a cationic dye from aqueous solutions by adsorption onto bentonite clay,” Chemosphere, vol. 63, no. 11, pp. 1842–1848, Jun. 2006, doi: 10.1016/j.chemosphere.2005.10.033. E. Errais, J. Duplay, F. Darragi, I. M'Rabet, A. Aubert, F. Huber, G. Morvan, “Efficient anionic dye adsorption on natural untreated clay: Kinetic study and thermodynamic parameters,” Desalination, vol. 275, no. 1–3, pp. 74–81, Jul. 2011, doi: 10.1016/j.desal.2011.02.031. N. Abidi, E.Errais, J. Duplay, A. Berez, A. Jrad, G. Schäfer, M. Ghazi, K. Semhi, M. Trabelsi-Ayadi, “Treatment of dye-containing effluent by natural clay,” J. Clean. Prod., vol. 86, pp. 432–440, Jan. 2015, doi: 10.1016/J.JCLEPRO.2014.08.043. Z. Hicham, Z. Bencheqroun, I. El Mrabet, M. Kachabi, M. Nawdali, and I. Neves, “