Journals / Sakarya University Journal of Science / 2021 / Cilt: 25 Sayı: 3

A Study on Analysis of Sinter Microstructure and Phase Morphology

Pages
821–833
Publication Date
2021-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It will be ensured to interpret the results through rietveld method.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Sinter is a blast furnace input material obtained by heating to 900-1200 oC without full melting and adhering to each other with superficial melting.
📊
Key Findings & Data:The scope of this project is the determination of the amount of SFCA formed by bonding SiO2, CaO, Fe2O3, Al2O3 and MgO compounds and monitoring this value as a parameter by the enterprise.
💡
Conclusion & Impact:It will be ensured to interpret the results through rietveld method.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Sintering · iron ore · microstructure

Abstract

Sinter is a blast furnace input material obtained by heating to 900-1200 oC without full melting and adhering to each other with superficial melting. It is considered as a multi-phase material with its sinter heterogeneous microstructure. In general, the main mineral phases are hematite, magnetite, silicoferrite of calcium and aluminium (SFCA) and silicates. By determining the SFCA structure in the sinter material, the sintering process will be made more stable and important parameters affecting the quality in the sintering process will be examined. Sinter material obtained from iron ore, iron and steel industry by products and auxiliary materials. The scope of this project is the determination of the amount of SFCA formed by bonding SiO2, CaO, Fe2O3, Al2O3 and MgO compounds and monitoring this value as a parameter by the enterprise. Sinter samples having different characteristic features will be made ready for X-ray diffraction (XRD) and optical microscopy inspections by polishing, etching and freezing in epoxy for mineralogical researches. Before raw data obtained from the analysis is evaluated at Autoquan, they will be converted into Autoquan format and then, they will be read in XRD device and mineralogical composition of the sinter will be revealed by XRD analyses. Detailed view of mineralogical compounds will be investigated so as to complete scanning electron microscope (SEM) analyses and XRD analyses; elemental composition of the compounds and valence conditions of the elements will be researched by energy dispersive spectroscopy (EDS) method. Hematite, magnetite, calcium ferrite phase structures in different formations will be studied subject to melting and temperature during optical microscopy studies conducted on sinter samples. Furthermore, it will be researched variations of SFCA, SFCA-I and SFCA-II phase structures within the sinter matrix subject to different raw material input and process parameters. It will be ensured to interpret the results through rietveld method.

🔖

Cite This Article

BÖLÜKBAŞI, Ö. S. (2021). A Study on Analysis of Sinter Microstructure and Phase Morphology. Sakarya University Journal of Science, Cilt: 25 Sayı: 3, 821–833. https://ajindex.com/articles/941809

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. R.P. Bhagat, U. Chattoray, and S.K. Sil, “Porosity of sinter and its relation with the sintering indices”, ISIJ International, vol. 46, no. 11, p. 1728-1730, 2006
  2. T. Umadevi, R. Sah, and P. C. Mahapatra, “Influence of sinter basicity (CaO/SiO2) on low and high alumina iron ore sinter quality”, Mineral Processing and Extractive Metallurgy, 123(2), 75-85, 2014
  3. R. Chaigneau, “Fluxed sinter formation and SFCA reduction under Simulated Conditions”, PhD Thesis, Delft University Press, p. 12-28, 1994
  4. L.H. Hsieh and J.A. Whiteman, “Effect of oxygen potential on mineral formation in lime-fluxed iron ore sinter”, ISIJ International, vol. 29, no. 8, p. 625- 634, 1989
  5. C. E. Loo, R. P. Williams, and L. T. Matthews, “Influence of material properties on high temperature zone reactions in sintering of iron ore”, Transactıons of The Institution of Mining And Metallurgy Sectıon C-Mineral Processing and Extractive Metallurgy, vol.101, p. 7-15, 1992
  6. N. Chakraborti, K. Deb, and A. Jha, “A genetic algorithm based heat transfer analysis of a bloom re-heating furnace”, Steel Research, vol. 71, no. 10, p. 396-402, 2000
  7. N. A. Webster, M. I. Pownceby, I. C. Madsen, and J. A. Kimpton, “Silico-ferrite of calcium and aluminum (SFCA) iron ore sinter bonding phases: new insights into their formation during heating and cooling”, Metallurgical and Materials Transactions B, 43(6), 1344-1357, 2012
  8. N.J. Bristow and A.G. Waters, “Role of SFCA in promoting high-temperature reduction properties of iron ore sinters”. Mineral Processing & Extractive Metallurgy, Section C. vol. 100. p. 1-4, 1991
  9. S. Nicol, J. Chen, M. I. Pownceby, and N. A. Webster, “A Review of the Chemistry, Structure and Formation Conditions of Silico-Ferrite of Calcium and Aluminum (SFCA) Phases”, ISIJ International, 58(12), 2157-2172, 2018
  10. T. Takayama, R. Murao, and M. Kimura, “Quantitative Analysis of Mineral Phases in Iron-ore Sinter by the Rietveld Method of X-ray Diffraction Patterns”, ISIJ International, ISIJINT-2017, 2018
  11. M. Kama, T. Miyazaki, K. Ito, Y. Hida, and M. Sasaki, “Morphological analysis of calcium ferrite and hematite in sintered ore”, Transactions ISIJ. vol. 24, 1984
  12. W.G. Mumme, “The crystal structure of SFCA-II, Ca5.1Al9.3Fe3+ 14.30Fe2+ 0.55O48, a homologue of the aenigmatite structure type, and new structure type, and new crystal refinement of SFCA, Ca2Al5Fe7O20”, Implications for the nature of the ternary-phase solid-solution previously reported