Journals / Konya Mühendislik Bilimleri Dergisi / 2021 / Cilt: 9 Sayı: 2

PROPERTIES OF MORTARS PRODUCED WITH CLASSLESS AFSIN-ELBISTAN FLY ASH AND WASTE GROUND GLASS

Sınıfsız Afsin-Elbistan Uçucu Külü ve Atık Cam Tozundan Yapılan Harçların Özellikleri

Pages
416–427
Publication Date
2021-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results of this study showed that by adding different amounts of glass powder to the Afsin- Elbistan fly ash, it could be used in cement production as the ash was classified into class.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aims of the present study to investigate classless Afsin-Elbistan fly.
📊
Key Findings & Data:For this purpose, classless Afsin-Elbistan fly ash and waste granulated glass have been mixed at certain rates.
💡
Conclusion & Impact:The results of this study showed that by adding different amounts of glass powder to the Afsin- Elbistan fly ash, it could be used in cement production as the ash was classified into class.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:ASR · Uçucu kül · Dayanım

Abstract

The aims of the present study to investigate classless Afsin-Elbistan fly. For this purpose, classless Afsin-Elbistan fly ash and waste granulated glass have been mixed at certain rates. After several experiments, obtained mixture according to standard were determined. The mortar samples produced by these mixtures with different percentages replaced of cement. Setting time, volume expansion, flexural and compressive strengths of samples were determined at 3-7-28 days. Moreover, alkali-silica reaction (ASR) of samples was tested according to using mortar bar experiments. The results of this study, Afsin- Elbistan fly ash can be used as C and F class ash in accordance. The bending and compressive strengths of the samples that added ten percent glass powder to the fly ash were found to be the highest. The expansion rates of the samples were found in accordance with the standard. The results obtained from experimental studies have shown that many properties of mortars produced with class ash are better than the Reference sample. The results of this study showed that by adding different amounts of glass powder to the Afsin- Elbistan fly ash, it could be used in cement production as the ash was classified into class.

Özet

The aim of the present study to investigate classless Afsin-Elbistan fly ash. For this purpose, classless Afsin-Elbistan fly ash and waste granulated glass have been mixed at certain rates. After several experiments, obtained mixture according to standard were determined. The mortar samples produced by these mixtures with different percentages replaced of cement. Setting time, volume expansion, flexural and compressive strengths of samples were determined at 3-7-28 days. Moreover, alkali-silica reaction (ASR) of samples was tested according to using mortar bar experiments. The results of this study, Afsin-Elbistan fly ash can be used as C and F class ash in accordance. The best results of flexural and compressive strengths of samples were obtained by fifteen percent ground glass added. Expansion ratio of the samples was within the limits given standard. From the results that has been founded many properties of the mortars are better than that of the References samples. This study has shown that the addition waste ground glass to classless ash can be used as a C or F class ash.

🔖

Cite This Article

BİNİCİ, H., EKEN, M., USLU, K. (2021). PROPERTIES OF MORTARS PRODUCED WITH CLASSLESS AFSIN-ELBISTAN FLY ASH AND WASTE GROUND GLASS. Konya Mühendislik Bilimleri Dergisi, Cilt: 9 Sayı: 2, 416–427. https://ajindex.com/articles/938538

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. ASTM C1293-08b, 2009, Standard Test Method for Determination of Length Change of Concrete Due to Alkali- Silica Reaction, ASTM Annual Book of Standards, Volume 04.02, Concrete and Aggregates, ASTM International, West Conshohocken, Pennsylvania, USA. Atis, C.D., Tartıcı, H., Sevim, U.K., Ozcan, F., Akcaozoglu, K., & Yuzgec, C., 2002, Afsin-Elbistan uçucu külünün beton katkısı olarak kullanılabilirliği, 5. Uluslararası Inşaat Mühendisliğinde Gelişmeler Kongresi, Istanbul, pp. 161-16 (In Turkish). Bentli, İ., Uyanık, A.O., Demir, U., Şahbaz, O., & Çelik, M.S., 2005, Seyit Ömer Termik Santrali Uçucu Küllerinin Tuğla Katkı Hammaddesi Olarak Kullanımı, Türkiye 19. Uluslararsı Madencilik Kongresi ve Fuarı. /MCET2005,
  2. İzmir, Türkiye, 09-12 Haziran, syf. 385-392(In Turkish). Buchwald, A., Kaps, C., & Hohmann, M., 2003, Alkali-activated binders and pozzolan cement binders- compete binder reaction or two sides of the same story? In: Proceedings of the 11th international congress on the chemistry of cement (ICCC), Durban, p. 1238–46.
  3. Binici, H., & Aksogan, O., 2006, Sulfate resistance of plain and blended cement, Cement and Concrete Composite 28 39-46.
  4. Federico, L.M., Chidiac, & S.E., 2009, Waste glass as a supplementary cementitious material in concrete – Critical review of treatment methods, Cement & Concrete Composites 31 606–610.
  5. Ghazali, M., Kausha, O. P., 2015, Characteristics of Fly Ash from Thermal Power Plants and its Management along with Settling Pond Design, International Journal of Engineering Research & Science, vol.1, pp.24-32.
  6. Kaplan, H., & Binici, H., 1996, Trass and trass cement. Cem World 1:23–30
  7. Kılınckale, M. F., 1995, Uçucu Küllü Çimento Üretiminde Uçucu Külün Öğütme Şeklinin Çimento Üzerinde Etkisi, Endüstriyel Atıkların İnşaat Sektöründe Kullanılması Bildiriler Kitabı, TMMOB yayını, 172 s, Ankara, (In Turkish). Kockal, N.U., & Ozturan, T., 2010, Effects of lightweight fly ash aggregate properties on the behavior of lightweight concretes, Journal of Hazardous Materials, vol. 179, pp. 954–965.
  8. Massazza, F., 1993,
  9. Pozzolanic cements, Cement and Concrete Composites 15 185-214
  10. Mukhopadhyay, K. A., & Liu, W. K., 2015, Application of nanotechnology to control ASR in Portland cement concrete, Nanotechnol. Constr. 465–471.
  11. Omran, A., & Tagnit-Hamou. A., 2016, Performance of glass-powder concrete in feld applications, Construction and Building Material 109 84-95.
  12. Park, B. S., Lee, C. B., & Kim, H. J., 2004, Studies on Mechanical Properties of Concrete Co