SavedAdd your journal

Journals / Konya Mühendislik Bilimleri Dergisi / 2021 / Cilt: 9 Sayı: 4

INVESTIGATION OF ROCK AGGREGATE QUALITY IMPROVEMENT THROUGH CHANGES IN CRUSHING CIRCUIT: A CASE STUDY ON VERTICAL SHAFT IMPACT CRUSHER

Agrega Kalitesi İyileştirmenin Kırma Döngüsü Değişimi İle Araştırılması: Dik Milli Kırıcı İçin Örnek Bir Çalışma

Ekin KÖKEN
Kerem ÇİMŞİR
Pages
1040–1050
Publication Date
2021-12-04
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The key points and details on the aggregate quality improvement processes were given in this study.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The present study investigates the effects of rock crushing circuits on aggregate quality.
📊
Key Findings & Data:The simulations revealed quantitative data on the production yield, efficiency of crushers, size reduction ratio.
💡
Conclusion & Impact:The key points and details on the aggregate quality improvement processes were given in this study.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Kırma – eleme tesisi · Kırmataş · Agrega kalitesi

Abstract

The present study investigates the effects of rock crushing circuits on aggregate quality. For this purpose, a crushing – screening plant located in Vize (Kırklareli, Turkey) was considered. Based on the current operating conditions, the crushing – screening plant was modeled. The simulations revealed quantitative data on the production yield, efficiency of crushers, size reduction ratio. Concerning cone and vertical shaft impact crushers, rock aggregate quality was investigated for products with a particle size range of 33 – 63 mm. As a result of full-scale crushing tests, it was determined that the quality of rock aggregates is affected by the crushing circuit. Thanks to the several changes in crushing circuit, the Los Angeles abrasion value and flakiness index of the investigated rock aggregates were improved by 32% and 35%, respectively. The key points and details on the aggregate quality improvement processes were given in this study.

Özet

Bu çalışma kaya kırma döngüsünün agrega kalitesi üzerinde olan etkilerini araştırmaktadır. Bu amaçla, Vize’de (Kırklareli, Türkiye) bulunan bir kırma – eleme tesisi dikkate alınmıştır. Mevcut çalışma koşulları dikkate alınarak, kırma – eleme tesisinin bilgisayar ortamında simülasyonu yapılmıştır. Simülasyonlar üretim miktarı, kırıcıların verimliliği ve boyut küçültme oranı gibi niceliksel verileri içermektedir. Konik ve dik milli kırıcılar dikkate alınarak, kaya agrega kalitesi 33 – 63 mm boyut grubundaki agregalar için araştırılmıştır. Büyük ölçekte gerçekleştirilen parçalanma deneylerinde, kaya agrega kalitesinin kırma döngüsünden etkilendiği belirlenmiştir. Kırma döngüsünde yapılan bazı değişimler ile, araştırılan agregaların Los Angeles aşınma değeri ve yassılık indeksi sırasıyla %32 ve %35 oranlarında iyileştirilmiştir. Bu çalışmada agrega kalitesi iyileştirme süreçlerine ilişkin ana hatlar ve detaylar verilmiştir.

🔖

Cite This Article

KÖKEN, E., ÇİMŞİR, K. (2021). INVESTIGATION OF ROCK AGGREGATE QUALITY IMPROVEMENT THROUGH CHANGES IN CRUSHING CIRCUIT: A CASE STUDY ON VERTICAL SHAFT IMPACT CRUSHER. Konya Mühendislik Bilimleri Dergisi, Cilt: 9 Sayı: 4, 1040–1050. https://ajindex.com/articles/938531

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Ajamu, S.O. and Ige, J.A., 2015, “Influence of coarse aggregate types and mixing method of concrete made from natural aggregate“, International Journal of Engineering and Technology, 5(7), 2049 – 3444. ASTM C136 / C136M,2019, “Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates“, ASTM International ASTM D692/692M,2015, “Standard specification for coarse aggregate for bituminous paving mixtures. “, ASTM International Bengtsson M. and Evertsson C.M., 2006, “Measuring characteristics of aggregate material from vertical shaft impact crushers“, Minerals Engineering. 19(15), 1479 – 1486. Bengtsson, M., 2009, “Quality-driven production of aggregates in crushing plants“, Dissertation, Chalmers University of Technology. Briggs, C., & Evertsson, C. M., 1998, “Shape potential of rock.“, Minerals Engineering, 11(2), 125–132. BS EN 933–3, 2012, “Tests for geometrical properties of aggregates: Determination of particle shape, Flakiness index“, British Standards Institution, London BS EN 1097-2, 2010, “Tests for mechanical and physical properties of aggregates: methods for the determination of resistance to fragmentation. “, British Standards Institution, London BS EN 1097-6, 2013, “Tests for mechanical and physical properties of aggregates: determination of particle density and water absorption. “ British Standards Institution, London Chen Z. Wang G. Xue D. and Bi Q., 2020, “Simulation and optimization of gyratory crusher performance based on the discrete element method“, Powder Technology, 376, 93 – 103. Davoodi A., Asbjörnsson G., Hulthén E. and Evertsson M., 2019, “Application of the discrete element method to study the effects of stream characteristics on screening performance“, Minerals, 9(12): 788. DeDiemar R., 1990, “New concepts in jaw crusher technology“, Minerals Engineering, 3(1–2), 67 – 74. Djordjevic N., Shi F.N. and Morrison R.D., 2003, “Applying discrete element modelling to vertical and horizontal shaft impact crushers“, Minerals Engineering, 16(10), 983 – 991. Duthoit, V., 2000, “Crushing and grinding aggregates“, Chapter. 9, (Ed. Louis Primel and Claud Tourenq). Balkema, Rotterdam Eloranta, J., 1995, “Influence of crushing process variables on the product quality of crushed rock. “, Dissertation, Tampere University of Technology. Fladvad M. and Onnela T., 2020, “Influence of jaw crusher parameters on the quality of primary crushed aggregates“, Minerals Engineering. 151: 106338. Guimaraes, M. S., Valdes, J. R., Palomino, A. M., & Sa