Journals / Konya Journal of Engineering Sciences / 2023 / Cilt: 11 Sayı: 2

Production of Levulinic Acid from Chitosan in Different Solvent Mediums Using Tungstophosphoric Acid as Catalyst

FARKLI ÇÖZÜCÜ ORTAMLARINDA TUNGSTOFOSFORİK ASİT KATALİZÖRLÜĞÜNDE KİTOSANDAN LEVULİNİK ASİT ELDESİ

Pages
370–378
Publication Date
2023-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

While no levulinic acid was obtained during the biomass conversion in aqueous medium without any catalyst, by using tungstophosphoric acid, levulinic acid was obtained with a yield of 3.1% from chitosan and 7.0% from glucose.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, tungstophosphoric acid catalyzed one-step hydrolysis and conversion of chitosan and glucose to levulinic acid in different solvent mediums at a certain temperature and time were investigated.
📊
Key Findings & Data:In catalytic conversion process, γ-valerolactone added to the aqueous medium at a 1:5 mass ratio (cosolvent-water) did not change the levulinic acid conversion efficiency of chitosan, but increased glucose conversion efficiency by two-fold.
💡
Conclusion & Impact:While no levulinic acid was obtained during the biomass conversion in aqueous medium without any catalyst, by using tungstophosphoric acid, levulinic acid was obtained with a yield of 3.1% from chitosan and 7.0% from glucose.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kitosan · Tungstofosforik Asit · Levulinik Asit.

Abstract

In this study, tungstophosphoric acid catalyzed one-step hydrolysis and conversion of chitosan and glucose to levulinic acid in different solvent mediums at a certain temperature and time were investigated. In catalytic conversion process, γ-valerolactone added to the aqueous medium at a 1:5 mass ratio (cosolvent-water) did not change the levulinic acid conversion efficiency of chitosan, but increased glucose conversion efficiency by two-fold. When 1-butyl-3-methylimidazolium hydrogensulfate was added to the aqueous medium at the same ratio, the yield of levulinic acid in both chitosan and glucose conversion reached 3.7% and 22.7%, respectively. When the total amount of reducing sugar after the conversion of chitosan in water/1-butyl-3-methylimidazolium hydrogensulfate medium and FT-IR spectrum of solid waste were examined, it can be seen that the acidic character of ionic liquid is effective on hydrolysis and conversion. While no levulinic acid was obtained during the biomass conversion in aqueous medium without any catalyst, by using tungstophosphoric acid, levulinic acid was obtained with a yield of 3.1% from chitosan and 7.0% from glucose.

Özet

Bu çalışmada kitosan ve glukozun farklı çözücü ortamlarında belirli sıcaklık ve sürede tungstofosforik asit katalizörlüğünde tek basamakta hidrolizi ve levulinik aside dönüşümleri incelenmiştir. Katalitik dönüşüm prosesinde kütlece 1:5 oranında (yardımcı çözücü-su) sulu ortama eklenen γ-valerolakton, kitosanın levulinik aside dönüşüm verimini değiştirmezken, glukoz dönüşüm verimini yaklaşık iki katına çıkarmıştır. Sulu ortama aynı oranda 1 butil 3 metilimidazolyum hidrojensülfat ilavesinde ise hem kitosan hem de glukoz dönüşümlerinde levulinik asit verimi sırasıyla %3,7 ve %22,7’ye ulaşmıştır. Kitosanın su/1 butil-3-metilimidazolyum hidrojensülfat ortamında dönüşümü sonrası toplam indirgen şeker miktarı ve katı atığın FT-IR spektrumu incelendiğinde iyonik sıvının asidik karakterinin hidroliz ve dönüşüm üzerinde etkili olduğu görülmektedir. Katalizörsüz sulu ortamda biyokütle dönüşümünde levulinik asit oluşmazken, tungstofosforik asit kullanıldığında kitosandan %3,1, glukozdan ise %7,0 verimle levulinik asit elde edilmiştir.

🔖

Cite This Article

ÖZDEMİR, Ş., NİŞ, B., ÖZSEL, B. K. (2023). Production of Levulinic Acid from Chitosan in Different Solvent Mediums Using Tungstophosphoric Acid as Catalyst. Konya Journal of Engineering Sciences, Cilt: 11 Sayı: 2, 370–378. https://ajindex.com/articles/937914

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. A. Morone, M. Apte, and R. A. Pandey, “Levulinic acid production from renewable waste resources: Bottlenecks, potential remedies, advancements and applications,” Renewable and Sustainable Energy Reviews, vol. 51, pp. 548-565, 2015
  2. W. Hou, L. Liu, and H. Shen, “Selective conversion of chitosan to levulinic acid catalysed by acidic ionic liquid: Intriguing NH2 effect in comparison with cellulose,” Carbohydate Polymers, vol. 195, pp. 267-274, 2018
  3. J. A. Dumesic, D. Martin Alonso, and J. S. Luterbacher, “Biomass pre-treatment for co-production of high-concentration C5- and C6-carbohydrates and their derivatives,” U.S. Patent 9,359,650, June, 2016
  4. H. Q. Lê, H. Sixta, and M. Hummel, “Ionic liquids and gamma-valerolactone as case studies for green solvents in the deconstruction and refining of biomass,” Current Opinion in Green and Sustainable Chemistry, vol. 18, pp. 20-24, 2019
  5. X. Li, Q. Liu, C. Luo, X. Gu, L. Lu, and X. Lu, “Kinetics of Furfural Production from Corn Cob in γ-Valerolactone Using Dilute Sulfuric Acid as Catalyst,” ACS Sustainable Chemistry & Engineering, vol. 5, no. 10, pp. 8587-8593, 2017
  6. F. Huang, W. Li, Q. Liu, T. Zhang, S. An, D. Li, and X. Zhu, “Sulfonated tobacco stem carbon as efficient catalyst for dehydration of C6 carbohydrate to 5-hydroxymethylfurfural in γ- valerolactone/water,” Fuel Processing Technology, vol. 181, pp. 294-303, 2018
  7. S. G. Wettstein, D. M. Alonso, Y. Chong, and J. A. Dumesic, “Production of levulinic acid and gamma-valerolactone (GVL) from cellulose using GVL as a solvent in biphasic systems,” Energy & Environmental Science, vol. 5, no. 8, pp. 8199-8203, 2012
  8. M. R. Park, H. S. Kim, S. K. Kim, and G. T. Jeong, “Thermo-chemical conversion for production of levulinic and formic acids from glucosamine,” Fuel Processing Technology, vol. 172, pp. 115-124, 2018
  9. T. Zhang, W. Li, S. An, F. Huang, X. Li, J. Liu, G. Pei, and Q. Liu, “Efficient transformation of corn stover to furfural using p-hydroxybenzenesulfonic acid-formaldehyde resin solid acid,” Bioresource Technology, vol. 264, pp. 261-267, 2018
  10. J. X. Feng, H. J. Zang, Q. Yan, M. G. Li, and B. W. Cheng, “Conversion of Chitosan into 5- Hydroxymethylfurfural via Hydrothermal Synthesis,” Advance Material Research, vol. 1095, pp. 411-414, 2015
  11. X. Li, X. Lu, S. Nie, M. Liang, Z. Yu, B. Duan, J. Yang, R. Xu, L. Lu, and C. Si, “Efficient catalytic production of biomass-derived levulinic acid over phosphotungstic acid in de