SavedAdd your journal

Journals / Gıda / 2020 / Cilt: 45 - Sayı: 6

THE EFFECT OF PROCESS PARAMETERS ON COLOR AND DENSITY PROPERTIES OF FOAM HALVA: TAGUCHI MATHEMETICAL MODEL OPTIMIZATION

KÖPÜK HELVA ÜRETİM PARAMETRELERİNİN RENK VE YOĞUNLUK ÖZELLİKLERİNE ETKİSİ: TAGUCHİ MATEMATİKSEL MODEL OPTİMİZASYONU

Mehmet GÜLDANE
Mahmut DOGAN
Journal
Gıda
Pages
1248–1260
Publication Date
2020-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Consequently, it was determined that model foams/foam halvas with reduced saponin content and targeted density and color could be produced using Taguchi method.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, effects of control parameters (protein type, hydrocolloid concentration, hydrocolloid type and mixing temperature) on density response of model foams and color response of model foam halvas.
📊
Key Findings & Data:Signal/Noise ratio for the lowest density and the highest L* values were obtained using Taguchi L16 experimental design (44).
💡
Conclusion & Impact:Consequently, it was determined that model foams/foam halvas with reduced saponin content and targeted density and color could be produced using Taguchi method.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Hidrokolloidler · köpürme · saponin

Abstract

In this study, effects of control parameters (protein type, hydrocolloid concentration, hydrocolloid type and mixing temperature) on density response of model foams and color response of model foam halvas. Signal/Noise ratio for the lowest density and the highest L* values were obtained using Taguchi L16 experimental design (44). As a result of the analysis, model foam obtained by mixing solution containing whey protein isolate (0.5%), saponin (0.096%) and pectin (0.05%) at 80oC was determined as the best foaming sample. For density response, Signal/Noise ratio of this sample (13.98 dB) was also detected higher than control (11.49 dB). There was no significant difference between the model foam halva produced by whipping the solution (whey protein isolate (0.5%), saponin (0.096%) and xanthan gam (0.1%)) at 40oC and traditional method. Consequently, it was determined that model foams/foam halvas with reduced saponin content and targeted density and color could be produced using Taguchi method.

Özet

Bu çalışmada; kontrol parametrelerinin (protein çeşidi, hidrokolloid konsantrasyonu, hidrokolloid çeşidi ve çırpma sıcaklığı) model köpüklerin yoğunluklarına ve köpük helvaların renklerine etkileri Taguchi yöntemi kullanılarak belirlenmiştir. En düşük yoğunluk ve en yüksek L* değerleri için Sinyal/Gürültü oranları Taguchi L16 deney tasarımı (44) kullanılarak saptanmıştır. Analiz sonuçlarına göre; peynir altı suyu protein izolatı (%0.5), saponin (%0.096) ve pektin (%0.05) çözeltisinin 80 oC’de çırpılmasıyla elde edilen model köpüğün en iyi köpürebilen örnek olduğu belirlenmiştir. Ayrıca, bu örneğin yoğunluk yanıtı Sinyal/Gürültü oranının (13.98 dB) kontrolden (11.49 dB) daha yüksek olduğu tespit edilmiştir. Peynir altı suyu protein izolatı (%0.5), saponin (%0.096) ve ksantan gam (%0.1) ile hazırlanan çözeltinin 40 oC’de çırpılmasıyla üretilen model köpük helva ve geleneksel yöntemle üretilen helvanın parlaklıkları arasında istatistiksel açıdan önemli fark bulunmamıştır. Sonuç olarak; saponin içeriği azaltılmış, hedeflenen yoğunlukta ve renkte köpüklerin/köpük helvaların üretilebileceği Taguchi optimizasyon yöntemiyle belirlenmiştir.

🔖

Cite This Article

GÜLDANE, M., DOGAN, M. (2020). THE EFFECT OF PROCESS PARAMETERS ON COLOR AND DENSITY PROPERTIES OF FOAM HALVA: TAGUCHI MATHEMETICAL MODEL OPTIMIZATION. Gıda, Cilt: 45 - Sayı: 6, 1248–1260. https://ajindex.com/articles/92682

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Abascal, D.M., Gracia-Fadrique, J. (2009). Surface tension and foam stability of commercial calcium and sodium caseinates. Food Hydrocolloids, 23(7): 1848–1852, https://doi.org/10.1016/j.foodhyd.2009.02.012.
  2. Asghari, A.K., Norton, I., Mills, T., Sadd, P., Spyropoulos, F. (2015). Interfacial and foaming characterisation of mixed protein-starch particle systems for food-foam applications. Food Hydrocolloids, 53: 311–319, http://dx.doi.org/10.1016/j.foodhyd.2015.09.007.
  3. Balerin, C., Aymard, P., Ducept, F., Vaslin, S., Cuvelier, G. (2007). Effect of formulation and processing factors on the properties of liquid food foams. Journal of Food Engineering, 78(3): 802–809, https://doi.org/10.1016/j.jfoodeng.2005.11.021.
  4. Campbell, G.M., ve Mougeot, E. (1999). Creation and characterisation of aerated food products. Trends in Food Science and Technology, 10(9): 283-296,https://doi.org/10.1016/S0924-2244(00)00008-X.
  5. Carp, D.J., Baeza, R.I., Bartholomai, G.B., Pilosof, A.M.R. (2004). Impact of proteins-κ-carrageenan interactions on foam properties. LWT - Food Science and Technology, 37(5): 573–580, https://doi.org/10.1016/j.lwt.2003.11.007.
  6. Foegeding, E.A., Luck, P.J., Davis, J.P. (2006). Factors determining the physical properties of protein foams. Food Hydrocolloids, 20(2-3): 284–292, https://doi.org/ 10.1016/j.foodhyd.2005.03.014. Güçlü-Ustündağ, O., Mazza, G. (2007). Saponins: properties, applications and processing. Critical reviews in food science and nutrition, 47(3): 231–58, https://doi.org/10.1080/10408390600698197.
  7. Ibanoglu, E., ve Erçelebi, E.A. (2007). Thermal denaturation and functional properties of egg proteins in the presence of hydrocolloid gums. Food Chemistry, 101(2): 626–633, https://doi.org/10.1016/j.foodchem.2006.01.056.
  8. Lau, C.K., Dickinson, E. (2005). Instability and structural change in an aerated system containing egg albumen and invert sugar. Food Hydrocolloids, 19(1): 111–121, http://dx.doi.org/10.1016/j.foodhyd.2004.04.020.
  9. Lau, K., Dickinson, E. (2006). Structural and Rheological Properties of Aerated High Sugar Systems Containing Egg Albumen. Journal of Food Science, 69(5): 232–239, http://dx.doi.wiley.com/10.1111/j.1365-2621.2004.tb10714.x.
  10. Lazidis, A., Hancocks, R.D., Spyropoulos, F., Kreuß, M., Berrocal, R., Norton, I.T. (2014). Whey protein fluid gels for the stabilisation of foams. Food Hydrocolloids, 53: 209–217, http://dx.doi.org/10.1016/j.foodhyd.2015.02.022.
  11. Liszka-Skoczylas, M., Ptaszek, A., Zmudziński, D. (2014). The effect of h