SavedAdd your journal

Journals / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2019 / Cilt: 15 - Sayı: 2

The Impact Degrees of Basic Parameters on Repair Performance in Composite Patch Applications

Sefa Burak YÜCEL
Memet ZOR
Halit DOĞAN
Mustafa KARAMOLLA
Pages
187–191
Publication Date
2019-06-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results show that even the most disadvantageous patch application contributes significantly to the repair performance and that the application itself is the most effective factor.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, for composite patch repairs, the impact degrees of patch configuration and patch sizes on repair performance were determined and compared with each other.
📊
Key Findings & Data:The criterion that determines the impact degrees of the examined parameters was accepted to be the reduction rate in the SIF values.
💡
Conclusion & Impact:The results show that even the most disadvantageous patch application contributes significantly to the repair performance and that the application itself is the most effective factor.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Stress intensity factor · composite patch · repair

Abstract

In this study, for composite patch repairs, the impact degrees of patch configuration and patch sizes on repair performance were determined and compared with each other. First, stress intensity factor (SIF) values were calculated by using the Finite Element Method for tensile loading in an aluminum plate with center cracks, in unpatched situation. In this model, the repair was made by forming single and double sided patches and adhesive volumes too. The SIF values are recalculated for different patch thicknesses, widths, and crack lengths. The criterion that determines the impact degrees of the examined parameters was accepted to be the reduction rate in the SIF values. The results show that even the most disadvantageous patch application contributes significantly to the repair performance and that the application itself is the most effective factor. The second most effective parameter is patch configuration; the patch sizes have much less impact degree

🔖

Cite This Article

YÜCEL, S. B., ZOR, M., DOĞAN, H., KARAMOLLA, M. (2019). The Impact Degrees of Basic Parameters on Repair Performance in Composite Patch Applications. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 15 - Sayı: 2, 187–191. https://ajindex.com/articles/92643

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Liu, X., Wang, G. 2007. Progressive failure analysis of bonded composite repairs. Composite Structure; 81: 331–340
  2. Charalambides, M.N, Hardouin, R, Kinloch, A.J, Matthews, F.L. 1998. Adhesively-bonded repairs to fibre-composite materials. Experimental, Composite Part A; (I): 1371–1381
  3. Hu, F.Z, Soutis, C. 2000. Strength prediction of patch-repaired CFRP laminates loaded in compression. Composite Science Technology; 60: 1103–1114
  4. Gong, X.-J, Cheng, P, Rousseau, J, Aivazzadeh S. Effect of Local Stresses on Static Strength and Fatigue Life of Patched Composite Panels, 16th International Conferance Composite Materials, Kyoto, Japan, 2007, pp 1–7
  5. Marín, J.C, Barroso, A, París, F, Cañas, J. 2009. Study of fatigue damage in wind turbine blades. Engineering Failure Analaysis; 16: 656–668
  6. Campilho, R.D.S.G, Moura, M.F.S.F, Pinto, A.M.G, Morais, J.J.L, Domingues, J.J.M.S. 2009. Modelling the tensile fracture behaviour of CFRP scarf repairs. Composite Part B Engineering; 40: 149–157
  7. Breitzman, T.D, Iarve, E.V, Cook, B.M, Lipton, R.P, Rouge, B. Optimum Design a Composite Scarf Repair Patch Under Uniaxial Tensile Load, 17th International Conference on Composite Materials 2009, Edinburgh, İskoçya, 2009, pp 1–10
  8. Wang, Q.Y, Pidaparti, R.M. 2002. Static characteristics and fatigue behavior of composite-repaired aluminum plates. Composite Structure; 56: 151–155
  9. Belhouari, M, Bachir Bouiadjra, B, Megueni, A, Kaddouri, K. 2004. Comparison of double and single bonded repairs to symmetric composite structures: A numerical analysis. Composite Structure; 65: 47–53
  10. Kumar, A.M, Ripudaman, S. 3D Finite Element Modelling of a Composite Patch Repair, 9th International Conference in Fracture, (ICF9), Sydney, Australia, 1997, pp 215–216
  11. Yang, C, Huang, H, Tomblin, J.S, Sun, W. 2004. Elastic - Plastic Model of a dhesive–bonded single-lap composite joints. Journal of Composite Material; 38: 293–309
  12. Baldan, A. 2004. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: Adhesives,adhesion theories and surface pretreatment. Journal Material Science: 39:1-49
  13. Campilho, R.D.S.G, Moura, M.F.S.F, Domingues, J.J.M.S. 2005. Modelling single and double-lap repairs on composite materials. Composite Science Technology; 69: 1948–1958
  14. Okafor, A.C, Bhogapurapu, H. 2006. Design and analysis of adhesively bonded thick composite patch repair of corrosion grind-out and cracks on 2024 T3 clad aluminum aging aircraf