Journals / ÇOMÜ Ziraat Fakültesi Dergisi / 2015 / Cilt: 3 Sayı: 2

Examine the Production Activities of Vine Nurseries in the Light of Modern Day’s Vine Arboriculture Managements

Günümüz Asma Fidancılık İşletmelerinde Yürütülen Asma Fidanı Üretim Faaliyetlerinin İrdelenmesi

Pages
127–143
Publication Date
2015-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

However, in this regard, each of the vine nursery management enterpriser preferred a suitable method according to themselves, and even it observed during some intermediate applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this research, a survey has been conducted between the years 2010–2013 which consisted an approximate of 100 question asked to some of the today‟s vine nurseries management enterprisers (13 number), and majority of them were belonged to the Marmara and Aegean regions of our country.
📊
Key Findings & Data:The medium-thick cuttings (7–12 mm) are used by some management enterprises those adopting this method and placed the grafted cuttings (700–800 number) into the crates in normal intensity, and then kept them at an average of 25–28°C for a duration of 21–25 days.
💡
Conclusion & Impact:However, in this regard, each of the vine nursery management enterpriser preferred a suitable method according to themselves, and even it observed during some intermediate applications.
🔬Design:Survey & Empirical Study
📍Scope:2010–2013 Verileri
⚙️Variables:Açık köklü aşılı fidan · Tüplü (kaplı) aşılı fidan · Asma fidancılık işletmeleri

Abstract

In this research, a survey has been conducted between the years 2010–2013 which consisted an approximate of 100 question asked to some of the today‟s vine nurseries management enterprisers (13 number), and majority of them were belonged to the Marmara and Aegean regions of our country. The answers of questions asked to the vine nursery enterprisers, face to face, have been analyzed carefully aimed to examine the production activities of vine nurseries that carried out by the modern day‟s vine arboriculture management enterprisers. In the result of assessments, different vine nurseries organizations have been determined that the phases of open–rooted grafted grapevine and tubed (covered) grafted saplings production showed a large extent of similarity, however, differences were found in date, time, temperature, and materials and methods. Generally, two different methods are used mainly in germination rooms. The first method is a classical method. The medium-thick cuttings (7–12 mm) are used by some management enterprises those adopting this method and placed the grafted cuttings (700–800 number) into the crates in normal intensity, and then kept them at an average of 25–28°C for a duration of 21–25 days. The demand of the creation of a vigorous root system along with the middle–intensive brazenly shoots and a thicker callus come into prominence for longer duration in the germination room. In this case, the breaking period (7–14 days) is also become longer. According to the second method, being adopted in recent years, usage of thin cuttings (4–7 mm) in some managements and placement of heavy grafted cuttings (900–1200 number) to the crates where grafted cuttings are kept under constant temperature of 30°C for a duration of 13– 14 days (maximum 20 days) or by lowering the temperature gradually from 30–32°C during first 3 days. This method endures the formation of a sufficient and all-around fine callus in graft area within a shorter period in the direction of improving new shoots, callus in blinded buds, bottom-based callus and/or creation of roots. In the light of the above-mentioned cases, intensive and long roots along with any shoot growth have not been required, and the breaking period (3–7 days) is kept shorter than usual. However, in this regard, each of the vine nursery management enterpriser preferred a suitable method according to themselves, and even it observed during some intermediate applications.

Özet

Bu araştırma kapsamında, çoğunluğu ülkemizin Ege ve Marmara Bölgeleri’ne konumlanmış olan günümüz asma fidancılık işletmelerinin bazılarıyla (13 adet), 2010–2013 yılları arasında yaklaşık 100 soruluk bir anket çalışması yapılmıştır. Asma fidancılık işletmelerinin yüzyüze yapılan sorulara vermiş oldukları yanıtlar dikkatlice analiz edilerek, günümüz asma fidancılık işletmelerinde yürütülen asma fidanı üretim faaliyetlerinin irdelenmesi amaçlanmıştır. Değerlendirmeler neticesinde, farklı asma fidancılık kuruluşlarının açık köklü aşılı fidan ve tüplü (kaplı) aşılı fidan üretim aşamalarının büyük ölçüde benzerlik gösterdiği, bununla birlikte bazı tarih, süre, sıcaklık, materyal ve yöntem farklılıklarının bulunduğu belirlenmiştir. Genel olarak, çimlendirme odalarında başlıca iki farklı yöntem uygulanmaktadır. Birinci yöntem klasik yöntemdir. Bu yöntemi benimseyen bazı işletmelerde orta–kalın çelikler (7–12 mm) kullanılarak ve sandıklara normal yoğunlukta aşılı çelik (700– 800 adet) yerleştirilerek, aşılı çeliklerin 21–25 gün süresince ortalama 25–28°C sıcaklıkta tutulmasıyla, çimlendirme odasında daha uzun sürede daha kalın bir kallus, orta–yoğun pişkin sürgünler ile kuvvetlice bir kök sistemi oluşturma isteği ön plana çıkmakta, bu durumda alıştırma süresi de daha uzun (7–14 gün) olmaktadır. Son yıllarda benimsenen ikinci bir yöntem; bazı işletmelerde ince çelik (4–7 mm) kullanımı ve sandıklara yoğun aşılı çelik (900–1.200 adet) yerleştirilerek, 13–14 gün (maksimum 20 gün) süresince 30°C sabit sıcaklık veya ilk 3 gün 30–32°C‟den kademeli olarak sıcaklığın düşürülmesiyle, aşılı çeliklerin aşı bölgesinde daha kısa sürede yeterli ve çepeçevre ince bir kallus oluşumu, sıfır sürgün, köreltilen gözlerde kallus, dipte kallus ve(ya) çok az bir kök oluşturma isteği doğrultusunda geliştirilmesine dayanmaktadır. Bu durumda yoğun ve uzun kökler ile sürgün gelişimi hiç istenmemekte, alıştırma süresi de normalden daha kısa (3–7 gün) tutulmaktadır. Bununla birlikte, her fidancılık işletmesinin kendine uygun bir yöntemi tercih ettiği ve bazı işletmelerde ara uygulamalara da rastlanıldığı dikkati çekmektedir.

🔖

Cite This Article

Dardeniz, A., Ateş, F., Çoban, H., Kahraman, K. A., Savaş, Y., Ali, B., Gökdemir, A. (2015). Examine the Production Activities of Vine Nurseries in the Light of Modern Day’s Vine Arboriculture Managements. ÇOMÜ Ziraat Fakültesi Dergisi, Cilt: 3 Sayı: 2, 127–143. https://ajindex.com/articles/926381

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. 5 s. Burr, T.J., Ophel, K., Katz, B.H., Kerr, A., 1989. Effect of hot water treatment on systemic Agrobacterium tumafaciens Biovar 3 in dormant grape cuttings. Plant Disease. 73 (3): 242 245. s. 14: 493 513. 11 15 Ocak, Ankara.
  2. Hamilton, R., 1997. Hot water treatment of grapevine propagating material. The Australian Grapegrower and Winemaker. April: 21 22.: 2. 601 s. Dergisi (2): 107 115. A Zir. Fak. Derg. 3 (1): 53 61. Sempozy: 606 629. 11 15 Ocak, Ankara. rine etkileri. A. Cilt 27. eri. lerindeki 10
  3. 5 s. Burr, T.J., Ophel, K., Katz, B.H., Kerr, A., 1989. Effect of hot water treatment on systemic Agrobacterium tumafaciens Biovar 3 in dormant grape cuttings. Plant Disease. 73 (3): 242 245. s. 14: 493 513. 11 15 Ocak, Ankara.
  4. Hamilton, R., 1997. Hot water treatment of grapevine propagating material. The Australian Grapegrower and Winemaker. April: 21 22.: 2. 601 s. Dergisi (2): 107 115. A Zir. Fak. Derg. 3 (1): 53 61. Sempozy: 606 629. 11 15 Ocak, Ankara. rine etkileri. A. Cilt 27. eri. lerindeki 10