Journals / Konya Journal of Engineering Sciences / 2006 / Cilt: 21 Sayı: 3

The Experimental Investıgation of The Behaviors of Reınforced Concrete Columns Under Axial Load Effect Which Are Produced Under Site Conditions

ŞANTİYE ŞARTLARINDA ÜRETİLMİŞ BETONARME KOLONLARIN, EKSENEL YÜK ETKİSİ ALTINDAKİ DAVRANIŞLARININ DENEYSEL OLARAK İNCELENMESİ

Pages
69–82
Publication Date
2006-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is observed that displacements are more favorable in column samples surrounded with spirals with respect to the columns in different geometries.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to test the load capacity and stress‐strain relationship of columns which have the same cross‐sectional areas under the effect of axial load and to check confidence intervals of these results.
📊
Key Findings & Data:Experiment samples which are used in this study have 314 cm2 cross sectional area and 75 cm height: 4 square columns, 4 rectangle columns, 4 circular columns, 4 circular spiral columns.
💡
Conclusion & Impact:It is observed that displacements are more favorable in column samples surrounded with spirals with respect to the columns in different geometries.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Eksenel yük · beton · kolon

Abstract

The aim of this study is to test the load capacity and stress‐strain relationship of columns which have the same cross‐sectional areas under the effect of axial load and to check confidence intervals of these results. The experiment reinforcement steels are in different size, shape and produced from standardized cement and not standardized cement at the work site. Experiment samples which are used in this study have 314 cm2 cross sectional area and 75 cm height: 4 square columns, 4 rectangle columns, 4 circular columns, 4 circular spiral columns. Binder spacings, the thickness of binder reinforcements and longitudinal reinforcement steels are identical. The behaviors and stress‐strain relationships of reinforcement steels produced from C10 and C20 concretes under the effect of axial load are observed. Characteristic cube strengths of all samples for 7 and 28 days are obtained. The results obtained in this study have shown that square column samples are the most powerful ones, these samples have better capacity of axial load carriage. It is observed that displacements are more favorable in column samples surrounded with spirals with respect to the columns in different geometries.

Özet

Bu çalışmada, şantiye şartlarında, standartlara uygun olarak üretilmiş beton ile standartlara uygun olarak üretilmemiş betondan imal edilen, eksenel yük etkisinde değişik geometri ve donatı özelliklerine sahip, aynı kesit alanlı kolonların yük taşıma kapasiteleri ve gerilme‐birim deformasyon ilişkisi araştırılmış ve sorgulanmıştır. Kullanılan deney numuneleri 314 cm2 kesit alanı ve 75cm yüksekliğe sahip, 4 adet Kare kolon, 4 adet Dikdörtgen kolon, 4 adet Dairesel kolon ve 4 adet Dairesel Fretli kolon’dur. Aynı boyuna donatı, etriye aralığı ve etriye kalınlığına sahip donatı kullanılarak, C20 ve C10 betonlarından imal edilerek eksenel yük etkisinde davranışları ve gerilme‐birim deformasyon ilişkilerine bakılmıştır. Üretilen bütün beton numunelerinin 7 ve 28 günlük karakteristik küp basınç dayanımları numuneler kırılarak elde edilmiştir. Deneylerden elde edilen sonuçlar karşılaştırıldığında en fazla eksenel yük taşıma kapasitesine sahip kolonun kare enkesitli kolon numuneleri olduğu belirlenmiş, fretle sarılmış kolon numunelerinde deplasmanların diğer kolonlara göre daha az olduğu tespit edilmiştir.

🔖

Cite This Article

ÇÖĞÜRCÜ, M. T., DÖNDÜREN, M. S., ALTIN, M. (2006). The Experimental Investıgation of The Behaviors of Reınforced Concrete Columns Under Axial Load Effect Which Are Produced Under Site Conditions. Konya Journal of Engineering Sciences, Cilt: 21 Sayı: 3, 69–82. https://ajindex.com/articles/909672

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Aksan, B. 1988 “ Jacketed Column Behaviour Under Bending and Axial Load” MSc Thesis, Middle East Technical University, Ankara,
  2. January Atımtay, E., “Reinforced Concrete: Fundamentals” Bizim Büro Basımevi, Ankara,1998
  3. Atımtay, E., “Afet Bölgelerinde Yapılacak Yapılar Hakkında Yönetmelik (Betonarme Yapılar) “” Bizim Büro Basımevi, Ankara, 2000
  4. Can, H., “Çelik Korniyerler ile Güçlendirilmiş/Onarılmış Betonarme Kolonların Eksenel Yük Altında Davranışı” İ.M.O. Teknik Dergi, Cilt 8, Sayı 1, 1997 Can. H., 1995 “ Betonarme Kolonların Komşu İki Yüzünden Manto İle Onarımı Ve Güçlendirilmesi”, TMMO,Teknik dergi,Cilt6, Sayı1, Ocak ElMandooh Galal, K. Ghobarah., A. “Flexural And Shear Hysteretic Behaviour Of Reinforced Concrete Columns With Variable Axial Load” Engineering Structures, Volume 25, Issue 11, September 2003, Pages 1353‐1367 Ersoy. U., Tankut., 1991 “Jacketed Column Subjected to Combined Axial Load and Reserved Cylic Bending” Proceedings, Sixth Canadian Conferance on Earthquake engineering, Toronto, June. Hadi, M. N. S., Li., J. “External Reinforcement of High Strength Concrete Columns” Composite Structures, Volume 65, Issues 3‐4, September 2004, Pages 279‐287 Neville, A.M., 1969 “ Properties of Concrete”, Longman Scientific &Tech. Publ. Third Edition,
  5. London. Okkalı, S., Şener, S., “Yüksek Dayanımlı Betonarme Kolonlarda Boyut Etkisi” Yüksek Lisans Tezi, Gazi Üniversitesi,
  6. Fen Bilimleri Enstitüsü, Ankara, 1998
  7. Tümer, Ö., Özcebece, G., “Eksenel Yüklü Fretli Yüksek Dayanımlı Beton Kolonlar” Yüksek Lisans Tezi, Ortadoğu Üniversitesi,
  8. Fen Bilimleri Enstitüsü, Ankara, 1997
  9. Ünsal, F., Can, H., “Betonarme Kolonların (Kare ve Fretli) Eksenel Yük Altında Fretli Manto ile Onarımı ve Güçlendirilmesi” Yüksek Lisans Tezi, Gazi Üniversitesi,
  10. Fen Bilimleri Enstitüsü, Ankara, 1998
  11. Yalduz, F.C., Özcebece, G., “Eksenel Yüklü Fretli Normal Dayanımlı Beton Kolonlar” Yüksek Lisans Tezi, Ortadoğu Üniversitesi,
  12. Fen Bilimleri Enstitüsü, Ankara, 1997
  13. Yılmaz, Ü.S., Kaltakcı, M.Y., “Eksenel Yük Etkisindeki Çelik Tel Fiber Takviyeli Etriyeli Betonarme Kolonların Davranışı” Yüksek Lisans Tezi, Selçuk Üniversitesi,
  14. Fen Bilimleri Enstitüsü, Konya,2001