Journals / Konya Journal of Engineering Sciences / 2014 / Cilt: 2 Sayı: 3

Experımental and theoretıcal study of modulus of elastıcıty On recycled aggregate concrete

GERİ DÖNÜŞÜM AGREGALI BETONLARDA ELASTİSİTE MODÜLÜNÜN DENEYSEL VE TEORİK OLARAK İNCELENMESİ

Pages
13–24
Publication Date
2014-09-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It is observed that there was a high correlation between experimental results and empirical equation proposed by American Concrete Institute (ACI) for elasticity modulus.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, a certain age and class of coarse and fine aggregate from waste concrete as recycled aggregate concrete, use a sub-class is investigated.
📊
Key Findings & Data:In this study, coarse recycled concrete aggregate was used in the ratio of 0, 10, 20, 30, 40, 50%; fine recycled concrete aggregate was used in the ratio of 0, 10, 20, 30, 40, 50% and 100 % respectively in place of crushed sand.
💡
Conclusion & Impact:It is observed that there was a high correlation between experimental results and empirical equation proposed by American Concrete Institute (ACI) for elasticity modulus.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Atık beton · iri ve ince geri dönüşüm beton agregası · basınç dayanımı

Abstract

In this study, a certain age and class of coarse and fine aggregate from waste concrete as recycled aggregate concrete, use a sub-class is investigated. In this study, coarse recycled concrete aggregate was used in the ratio of 0, 10, 20, 30, 40, 50%; fine recycled concrete aggregate was used in the ratio of 0, 10, 20, 30, 40, 50% and 100 % respectively in place of crushed sand. Compressive stress, unit weight, moduls of elasticity and water absorption rates tests were determined for these concrete samples. Also, the elasticity modulus of the specimens has been calculated by using empirical equations which were proposed from some countries’ standards. It was tried to determine that the relationship between the experimental results and empirical equation results for elasticity modulus . It is observed that there was a high correlation between experimental results and empirical equation proposed by American Concrete Institute (ACI) for elasticity modulus.

Özet

Bu çalışmada, yaşı ve sınıfı belli beton atıklarından elde edilen iri ve ince agreganın geri dönüşüm agregası olarak bir alt sınıf betonda kullanım olanakları araştırılmıştır. Araştırmada; kırma iri agrega yerine %0, 10, 20, 30, 40, 50; kırma ince agrega yerine %0, 10, 20, 30, 40, 50 oranların da ağırlıkça geri dönüşüm beton agregası (GDBA) kullanılmıştır. Beton örneklerinin basınç dayanımları, elastisite modülleri birim ağırlık ve su emme oranları belirlenmiştir. Ayrıca, üretilen geri dönüşüm agregalı betonların elastisite modülleri çeşitli ülkelerin standartlarında önerilen ampirik formüllerle de hesaplanmıştır. Deneysel olarak belirlenen elastisite modülleri ile ampirik formüllerle hesaplanan elastisite modülleri arasındaki ilişki belirlenmeye çalışılmıştır. Sonuç olarak, betondaki geri dönüşüm agrega miktarı arttıkça deneysel verilerle hesaplanan elastisite modülleri ile ampirik formüllerle hesaplanan elastisite modülleri arasındaki ilişkinin azaldığı belirlenmiştir. Amerika Beton Enstitüsü (ACI) tarafından önerilen formül ile deneysel olarak hesaplanan elastisite modülü arasında oldukça yüksek bir ilişki olduğu görülmüştür.

🔖

Cite This Article

DEMİREL, C., ŞİMŞEK, O. (2014). Experımental and theoretıcal study of modulus of elastıcıty On recycled aggregate concrete. Konya Journal of Engineering Sciences, Cilt: 2 Sayı: 3, 13–24. https://ajindex.com/articles/909463

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. ASTM C469 Statıc Modulus Of Elastıcıty And Poısson’s Ratıo Of Concrete İn Compression. ACI 318-92, Building code requirements for reinforced concrete, ACI Manual of Concrete Practice Part 3:. British Standards Institute (BSI), Code of Practice fort he Structural use of concrete, CP110, Part 1, London. Comité Euro-International du Beton, CEB-FIP Model Code for Concrete Structures, Bull.124/125. Durmuş G., Şimşek O., ve Dayı Mustafa, ‘‘Geri Dönüşümlü İri Agregaların Beton Özelliklerine Etkisi ’’ Gazi Üniv. Müh. Mim. Fak. Der. 24(1): 183-189 (2009).
  2. Durmuş G., Şimşek O., ve Dayı Mustafa, ‘‘Geri Dönüşümlü İri Agregaların Beton Özelliklerine Etkisi ’’ Gazi Üniv. Müh. Mim. Fak. Der. 24(1): 183-189 (2009).
  3. Durmuş, G., Can, Ö. ve Şimşek, O., Geri Dönüşüm Agregalarından Üretilen Farklı Sınıflardaki Betonun Mühendislik Özelliklerinin Belirlenmesi, 5.Uluslararası İleri Teknolojiler Sempozyumu, 1- 4( 2009).
  4. Günçan N F, Eski Beton Kırığı Agregalı Betonların Fiziksel ve Mekanik Özellikleri, Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü, Osmangazi Üniversitesi, 1995.
  5. Köken, A. ve Köroğlu, M. A., Atık betonların beton agregası olarak kullanılabilirliği, Journal of Technical-Online, 7(1):(2008).
  6. Nik, D. Oikonomou, Recycled Concrete Aggregates, Cement and Concrete Composites, 27 (2): 315- 318(2005). Oikonomou N.D., 2005.
  7. Recycled Concrete Aggregates, Cement & Concrete Composites, 27,315-318.
  8. Özturan, T., "Eski Beton Kırığı Agregalı Betonlar", İ.T.Ü. İnşaat Fakültesi, Yapı Malzemesi Seminerleri, İstanbul, 1988. Samton G., 2003. Construction and Demolition Waste Manual, City of New York. Topçu, B., "Physical and Mechanical Properties of Concretes Produced with Waste Concrete", Cement and Concrete Research, 27, p.1817- 1823(1997).
  9. Topçu, B., Sengel, S., "Properties of Concretes Produced with Waste Concrete Aggregate", Cement and Concrete Research, 34: 1307-1312 (2004). TS 3530 EN 933–1, ‚Agregaların Geometrik Özellikleri İçin Deneyler Bölüm 1; TaneBüyüklüğü Dağılımı – Eleme Metodu‛, Türk Standartları Enstitüsü, Ankara. TS 130, ‚Agrega Karışımlarının Elek Analizi Deneyi İçin Metot‛ Türk Standartları Enstitüsü, Ankara. TS 3529, ‚Beton Agregalarının Birim Ağırlıkları Tayini‛, Türk Standartları Enstitüsü, Ankara. TS EN 1097–6, ‚Agregaların Mekanik ve Fiziksel Özellikleri İçin Deneyler Bölüm 6: Tane Yoğunluğu ve Su Emme Oranının Tayini‛, Türk Standartları Enstitüsü, Ankara. TS EN 1097–2, ‚Agregaların Mekanik ve Fiziksel Özellikleri İçin Deneyler Bölüm 2: Parçalanma Direncinin Tayini