Journals / Konya Journal of Engineering Sciences / 2017 / Cilt: 5 Sayı: 4

Photovoltaic Characteristics of Cupric Oxide/Silicon Heterojunction Nanodiodes

KÜPRİK OKSİT/SİLİSYUM HETEROEKLEMLİ NANODİYOTLARIN FOTOVOLTAİK ÖZELLİKLERİ

Pages
460–471
Publication Date
2017-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Furthermore, relatively high external quantum efficiency over a broadband spectrum of wavelengths between 400-1100 nm was detected.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Solution-based approaches are used to prepare nanostructured materials for device applications to reduce material production and device fabrication costs.
📊
Key Findings & Data:In this study, photovoltaic performance of Cupric oxide/Silicon p-n heterojunction nanodiodes were investigated.
💡
Conclusion & Impact:Furthermore, relatively high external quantum efficiency over a broadband spectrum of wavelengths between 400-1100 nm was detected.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Küprik oksit ince filmi · p-n heteroeklemli fotovoltaik diyot · Silisyum nanoteller

Abstract

Solution-based approaches are used to prepare nanostructured materials for device applications to reduce material production and device fabrication costs. In this study, photovoltaic performance of Cupric oxide/Silicon p-n heterojunction nanodiodes were investigated. Highly dense and vertically well-aligned Silicon nanowire arrays were successfully synthesized on a n-type (100)-oriented Si wafer through electroless etching technique. p-type Cupric oxide thin films were then coated onto Silicon nanowires via chemical bath deposition method to form three-dimensional heterostructures. Current-voltage (I-V) measurements were utilized to examine photovoltaic properties of the fabricated heterojunction diodes. The maximum power conversion efficiency were found to be 0.58% under simulated solar irradiation of AM 1.5 G. Furthermore, relatively high external quantum efficiency over a broadband spectrum of wavelengths between 400-1100 nm was detected.

Özet

Aygıt uygulamaları için nanoyapılı materyallerin sentezlenmesinde, ucuz olması sebebiyle solüsyon-bazlı yaklaşımlar kullanılır. Bu çalışmada, Küprik oksit/Silisyum p-n heteroeklemli nanodiyotların fotovoltaik performansı incelenmiştir. Yüksek yoğunluklu ve dikey olarak düzgün sıralanmış Silisyum nanotel kümeleri, n-tipi (100)-yönelimli kristal Silisyum dilimi üzerine akımsız dağlama tekniği ile sentezlendi. Daha sonra, üç-boyutlu heteroyapılar üretmek için p-tipi Küprik oksit ince filmleri Silisyum nanoteller üzerine kimyasal depolama yöntemi ile kaplandı. Akım-gerilim (I-V) ölçümleri, üretilen heteroeklemli diyotların fotovoltaik özelliklerini incelemek için kullanıldı. AM 1.5 G aydınlatma koşulları altında en yüksek güç dönüştürme verimliliği %0,58 olarak bulundu. Ayrıca, 400-1100 nm arasında geniş bir dalgaboyu spektrumunda oldukça yüksek dış kuantum verimi saptandı.

🔖

Cite This Article

AKGÜL, F. A. (2017). Photovoltaic Characteristics of Cupric Oxide/Silicon Heterojunction Nanodiodes. Konya Journal of Engineering Sciences, Cilt: 5 Sayı: 4, 460–471. https://ajindex.com/articles/909357

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Akgul, G., Aksoy Akgul, F., Mulazimoglu, E., Unalan, H. E., Turan, R., 2014, “Fabrication and Characterization of Copper Oxide-Silicon Nanowire Heterojunction Photodiodes”, Journal of Physics D: Applied Physics, Vol. 47, pp. 065106-1–065106-7.
  2. Akgul F. A., Akgul G., Yildirim N., Unalan H. E., Turan R., 2014, “Influence of Thermal Annealing on Microstructural, Morphological, Optical Properties and Surface Electronic Structure of Copper Oxide Thin Films”, Materials Chemistry and Physics, Vol. 147, pp. 987-995.
  3. Akgul, G., Aksoy Akgul, F., Unalan, H.E., Turan, R., 2016, “Photovoltaic Performance of Gallium-doped ZnO Thin Film/Si Nanowires Heterojunction Diodes”, Philosophical Magazine, Vol. 96, No. 11, pp. 1093-1109.
  4. Balamurugan, B., Mehta, B.R., 2001, “Optical and Structural Properties of Nanocrystalline Copper Oxide Thin Films Prepared by Activated Reactive Evaporation”, Thin Solid Films, Vol. 396, pp. 90-96.
  5. Bauer, J., Fleischer, F., Breitenstein, O., Schubert, L., Werner, P., Gösele, U., Zacharias, M., 2007, “Electrical Properties of Nominally Undoped Silicon Nanowires Grown by Molecular Beam Epitaxy”, Applied Physics Letters, Vol. 90, pp. 012105-1–012105-3.
  6. Colli, A., Fasoli, A., Beecher, P., Servati, P., Pisana, S., Fu, Y., Flewitt, A.J., Milne, W.I., Robertson, J., Ducati, C., De Franceschi, S., Hofmann, S., Ferrari, A.C., 2007, “Thermal and Chemical Vapor Deposition of Si Nanowires: Shape Control, Dispersion, and Electrical Properties”, Journal of Applied Physics, Vol. 102, pp. 034302-1–034302-13.
  7. Figueiredo, V., Elangovan, E., Gonçalves, G., Barquinha, P., Pereira, L., Franco, N., Alves, E., Martins, R., Fortunato, E., 2008, “Effect of Post-annealing on the Properties of Copper Oxide Thin Films Obtained from the Oxidation of Evaporated Metallic Copper”, Applied Surface Science, Vol. 254, pp. 3949-3954.
  8. Fu, Y.Q., Colli, A., Fasoli, A., Luo, J.K., Flewitt, A. J., Ferrari, A.C., Milne, W. I., 2009, “Deep Reactive Ion Etching As a Tool for Nanostructure Fabrication”, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, Vol. 27, pp. 1520-1526.
  9. Garnett, E.C., Yang, P., 2008, “Silicon Nanowire Radial p-n Junction Solar Cells”, Journal of the American Chemical Society, Vol. 130, pp. 9224-9225.
  10. Hochbaum, A. I., Fan, R., He, R., Yang, P., 2005, “Controlled Growth of Si Nanowire Arrays for Device Integration”, Nano Letters, Vol. 5, pp. 457-460.
  11. Jayatissa, A. H., Guo, K., Jayasuriya, A.C., 20