Journals / Konya Journal of Engineering Sciences / 2018 / Cilt: 6 Sayı: 1

INVESTIGATION OF SURFACE ROUGHNESS AND MICROHARDNESS IN BALL BURNISHING PROCESS OF AZ31B MAGNESIUM ALLOY

AZ31B Magnezyum Alaşımının Bilyalı Parlatma Yöntemi ile Mikrosertlik ve Yüzey Pürüzlülüğünün Araştırılması

Pages
152–161
Publication Date
2018-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

When lower feed rate and higher force parameters was choosen best surface roughness value was obtained.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Magnesium alloys which are lightweight and high strength materials have some limitations due to their insufficient corrosion resistance and low surface quality.
📊
Key Findings & Data:To overcome these limitations, especially improving surface properties ball burnishing process was applied to magnesium alloy with different parameters like force, number of passes, feed rate and speed.
💡
Conclusion & Impact:When lower feed rate and higher force parameters was choosen best surface roughness value was obtained.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Bilyalı Parlatma · Magnezyum alaşımı · Yüzey pürüzlülüğü

Abstract

Magnesium alloys which are lightweight and high strength materials have some limitations due to their insufficient corrosion resistance and low surface quality. To overcome these limitations, especially improving surface properties ball burnishing process was applied to magnesium alloy with different parameters like force, number of passes, feed rate and speed. For reducing number of experiments Taguchi method was used and optimum burnishing condition was determined according to S/N ratios. The results of surface roughness and hardness tests show that feed rate and force was found significant parameters for improving surface quality. When lower feed rate and higher force parameters was choosen best surface roughness value was obtained.

Özet

Hafif ve yüksek dayanımlı malzemelerden olan magnezyum alaşımları, yetersiz korozyon direnci ve düşük yüzey kalitesi nedeniyle bazı sınırlamalara sahiptir. Bu sınırlamaların üstesinden gelmek, özellikle yüzey özelliklerini iyileştirmek için, ilerleme hızı, devir, kuvvet ve paso sayısı gibi farklı parametrelerle bilyalı parlatma işlemi uygulanmıştır. Deney sayısını azaltmak için Taguchi yöntemi kullanılmış ve S/N oranlarına göre en iyi parlatma koşulları belirlenmiştir. Yüzey pürüzlülüğü ve sertlik testlerinin sonucunda ilerleme hızı ve kuvvetin yüzey kalitesini iyileştirmede önemli parametreler olduğu bulunmuştur. Düşük ilerleme hızı ve yüksek kuvvet parametreleri seçildiğinde en iyi yüzey pürüzlülüğü değeri elde edilmiştir.

🔖

Cite This Article

BULDUM, B. B. (2018). INVESTIGATION OF SURFACE ROUGHNESS AND MICROHARDNESS IN BALL BURNISHING PROCESS OF AZ31B MAGNESIUM ALLOY. Konya Journal of Engineering Sciences, Cilt: 6 Sayı: 1, 152–161. https://ajindex.com/articles/909344

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Aldas, K., Özkul, I., Eskil, M., 2014, “Prediction of Surface Roughness in Longitudinal Turning Process by a Genetic Learning Algorithm”, Materials Testing, Vol. 56, pp. 375-380.
  2. Cui, Z., Shi, H., Wang, W., Xu, B. 2015, “Laser Surface Melting az31bb Magnesium Alloy with Liquid Nitrogen-Assisted Cooling”, Transactions of Nonferrous Metals Society of China, Vol. 25, pp. 1446-1453.
  3. De Lacalle, L. N., Lamikiz, A., Sanchez, A., Arana, J. L., 2007, “The Effect of Ball Burnishing on Heat-Treated Steel and Inconel 718 Milled Surfaces”, The International Journal of Advanced Manufacturing Technology, Vol. 32, pp. 958-968.
  4. El-Axir, M., 2000, “An Investigation into Roller Burnishing”, International Journal of Machine Tools and Manufacture, Vol. 40, pp. 1603-1617.
  5. El-Axir, M. H., Ibrahim, A., 2005, “Some Surface Characteristics due to Center Rest Ball Burnishing”, Journal of Materials Processing Technology, Vol. 167, pp. 47-53.
  6. El-Axir, M., Othman, O., Abodiena, A., 2008”, Improvements in Out-of-Roundness and Microhardness of Inner Surfaces by Internal Ball Burnishing Process”, Journal of Materials Processing Technology, Vol. 196, pp. 120-128.
  7. El-Taweel, T., El-Axir, M., 2009, “Analysis and Optimization of The Ball Burnishing Process Through the Taguchi Technique”, The International Journal of Advanced Manufacturing Technology, Vol. 41, pp. 301-310.
  8. Fouad., Y, 2011, “Fatigue Behavior of a Rolled AZ31B Magnesium Alloy after Surface Treatment by EP and BB Conditions”, Alexandria Engineering Journal, Vol. 50, pp. 23-27.
  9. Fouad, Y., El Batanouny, M., 2011, “Effect of Surface Treatment on Wear Behavior of Magnesium Alloy AZ31B”, Alexandria Engineering Journal, Vol. 50, pp. 19-22.
  10. Gomez-Gras, G., Travieso-Rodriguez, J. A., Jerez-Mesa, R., 2015, “Experimental Characterization of the Influence of Lateral Pass Width on Results of a Ball Burnishing Operation”, Procedia Engineering, Vol. 132, pp. 686-692.
  11. Hassan, A. M., 1997, “The Effects of Ball-and Roller-Burnishing on the Surface Roughness and Hardness of Some Non-Ferrous Metals”, Journal of Materials Processing Technology, Vol. 72, pp. 385-391.
  12. Hassan, A. M., Al-Bsharat, A. S., 1996, “Improvements in Some Properties of Non-Ferrous Metals by the Application of the Ball-Burnishing Process”, Journal of Materials Processing Technology, Vol. 59, pp. 250-256.
  13. Hassan, A. M., Al-Dhifi, S. Z., 1999, “Improvement in the Wear Resistance of Brass Components by the Ball Burnishing Process”, Journal of Materials Processing Technology, Vol.