Journals / Konya Journal of Engineering Sciences / 2019 / Cilt: 7 Sayı: 2

OPTIMIZATION OF SYNTHESIS PARAMETERS FOR LEAD OXIDE NANOPARTICLES USING RESPONSE SURFACE METHODOLOGY

Yüzey Cevap Metodolojisi Kullanilarak Kurşun Oksit Nanoparçaciklarinin Sentez Parametrelerinin Optimizasyonu

Pages
298–308
Publication Date
2019-06-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The particle size of lead II oxide was found to be 19.75 nm under optimum parameters.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nano-sized lead oxide has useful applications that can be used in industry.
📊
Key Findings & Data:The modification was lead to increase the adequate precision of the model.
💡
Conclusion & Impact:The particle size of lead II oxide was found to be 19.75 nm under optimum parameters.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:RSM · Merkezi Kompozit Dizayn · Kurşun Oksit

Abstract

Nano-sized lead oxide has useful applications that can be used in industry. In this study, the synthesis parameters were optimized using response surface methodology and ANOVA study was also carried out. Reaction temperature, sodium hydroxide and lead (II) acetate concentration were studied as the factors and the particle size was selected as the response variable. The modification was lead to increase the adequate precision of the model. Close results between R2 (correlation coefficient) and R2adj showed the accuracy of the model. The optimum results of the study were found 14.89 M NaOH concentration, 0.87 M Pb(II)Ac and reaction temperature of 88.56 °C. The particle size of lead II oxide was found to be 19.75 nm under optimum parameters.

Özet

Nano boyutlu kurşun oksit, endüstride kullanılabilecek faydalı uygulamalara sahiptir. Bu çalışmada, sentez parametreleri cevap yüzey metodolojisi kullanılarak optimize edilmiş ve ANOVA çalışması da yapılmıştır. Sentez parametreleri olarak reaksiyon sıcaklığı, sodyum hidroksit ve kurşun (II) asetat konsantrasyonu incelenmiştir ve parçacık boyutu cevap değişkeni olarak seçilmiştir. Optimizasyon sonucunda modelin hassasiyeti artmıştır. R2 (korelasyon katsayısı) ile R2adj arasındaki yakın sonuç, modelin doğruluğunu göstermiştir. Çalışmanın sonucunda, 14.89 M NaOH konsantrasyonu, 0.87 M Pb (II)Ac konsantrasyonu ve 88.56 ° C reaksiyon sıcaklığı optimum sentez koşulları olarak belirlenmiştir. Kurşun (II) oksidin parçacık büyüklüğü, optimum parametreler altında 19.75 nm olarak bulunmuştur.

🔖

Cite This Article

AKBAY, İ. K., GÜNGÖR, A., GENÇ, R., ÖZDEMİR, T. (2019). OPTIMIZATION OF SYNTHESIS PARAMETERS FOR LEAD OXIDE NANOPARTICLES USING RESPONSE SURFACE METHODOLOGY. Konya Journal of Engineering Sciences, Cilt: 7 Sayı: 2, 298–308. https://ajindex.com/articles/909239

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Akbay, İsmail Kutlugün, Ahmet Güngör, and Tonguç Özdemir. 2017. “Optimization of the Vulcanization Parameters for Ethylene–propylene–diene Termonomer (EPDM)/Ground Waste Tyre Composite Using Response Surface Methodology.” Polymer Bulletin 74(12): 5095–5109.
  2. Alagar, M., T. Theivasant, and A. Kubera Raja. 2012. “Chemical Synthesis of Nano-Sized Particles of Lead Oxide and Their Characterization Studies.” Journal of Applied Sciences 12(4): 398–401. http://www.scialert.net/abstract/?doi=jas.2012.398.401 (June 11, 2018).
  3. Arulmozhi, K. T., and N. Mythili. 2013. “Studies on the Chemical Synthesis and Characterization of Lead Oxide Nanoparticles with Different Organic Capping Agents.” AIP Advances 3(12): 122122. http://aip.scitation.org/doi/10.1063/1.4858419 (June 11, 2018).
  4. Ba-Abbad, Muneer M. et al. 2013. “Optimization of Process Parameters Using D-Optimal Design for Synthesis of ZnO Nanoparticles via Sol-Gel Technique.” Journal of Industrial and Engineering Chemistry 19(1): 99–105. http://dx.doi.org/10.1016/j.jiec.2012.07.010.
  5. Ba-Abbad, Muneer M.; Chai, Pui Vun; Takriff, Mohd; Benamor, Abdelbaki; Mohammad, Abdul Wahab. 2015. “Optimization of Nickel Oxide Nanoparticle Synthesis through the Sol-Gel Method Using Box-Behnken Design.” Materials and Design 86: 948–56. http://dx.doi.org/10.1016/j.matdes.2015.07.176.
  6. Cho, Il Hyoung, and Kyung Duk Zoh. 2007. “Photocatalytic Degradation of Azo Dye (Reactive Red 120) in TiO2/UV System: Optimization and Modeling Using a Response Surface Methodology (RSM) Based on the Central Composite Design.” Dyes and Pigments 75(3): 533–43.
  7. Dehghani, Mohammad Hadi, Maryam Faraji, Amir Mohammadi, and Hossein Kamani. 2017. “Optimization of Fluoride Adsorption onto Natural and Modified Pumice Using Response Surface Methodology: Isotherm, Kinetic and Thermodynamic Studies.” Korean Journal of Chemical Engineering 34(2): 454–62. http://link.springer.com/10.1007/s11814-016-0274-4 (November 20, 2018).
  8. Genç, Rükan, Gael Clergeaud, Mayreli Ortiz, and Ciara K. O’sullivan. 2011. “Green Synthesis of Gold Nanoparticles Using Glycerol-Incorporated Nanosized Liposomes.” Langmuir 27(17): 10894–900.
  9. Güngör, Ahmet, Rükan Genç, and Tonguç Özdemir. 2017. “Facile Synthesis of Semiconducting Nanosized 0D and 2D Lead Oxides Using a Modified Co-Precipitation Method.” Journal of Turkish Chemical Society Part A: Chemistry 4(3): 1017–30.
  10. Jyoti, Mayekar, Dhar Vijay, and Srinivasan Radha. 2013. “To Study the Role of Temperature and Sodium Hydroxide Concentration in t