Journals / Konya Journal of Engineering Sciences / 2020 / Cilt: 8 Sayı: 2

Investigation of the effect of Calcination on Mg-Fe Hydrotalcite (FeHT)

Kalsinasyonun Mg-Fe Hidrotalsit (FeHT) Üzerindeki Etkisinin Araştırılması

Pages
318–327
Publication Date
2020-06-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The surface areawas approximately doubled at optimum calcination conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Adsorption is an effective and simple technique for removing contaminants in water.
📊
Key Findings & Data:It was observed that the specific surface area of K-FeHTsignificantly affected by the calcination temperature and time.
💡
Conclusion & Impact:The surface areawas approximately doubled at optimum calcination conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fe-Hidrotalsit (FeHT) · Kalsinasyon · Karakterizasyon

Abstract

Adsorption is an effective and simple technique for removing contaminants in water. Thedevelopment and characterization of the novel adsorbent with high surface area, which is effective forremoval of arsenic from water, was targeted. For this purpose, calcination conditions on the structure ofFeHT, known as LDH was investigated. Fe-Hydrotalcite (FeHT) and calcined Fe-Hydrotalcite (K-FeHT)were characterized by X-ray diffraction (XRD), thermogravimetry (TGA), differantial scanningcalorimeter (DSC), scanning electron microscopy (SEM), particle size analysis and Brunauer-Emmett-Teller (BET) spesific surface area analysis. It was observed that the specific surface area of K-FeHTsignificantly affected by the calcination temperature and time. As a result of the calcination, H2O, OH andCO2 contents between the layers were disappeared, and periclase structures was formed. The surface areawas approximately doubled at optimum calcination conditions.

Özet

Adsorpsiyon, sularda bulunan kirleticilerin giderilmesinde etkili ve basit bir tekniktir. Bu çalışmadasularda bulunan kirletici anyonların giderilmesinde kullanılmak üzere yüksek yüzey alanlı özgün biradsorbentin geliştirilmesi ve karakterizasyonunun yapılması amaçlanmıştır. Bu doğrultuda çift tabakalıhidroksit olarak da bilinen Fe-Hidrotalsitin kalsinasyonu incelenmiştir. FeHT ve K-FeHT numuneleri; Xışınıdifraktogramı (XRD), termal gravimetrik analiz (TGA), diferansiyel taramalı kalorimetre (DSC),taramalı elektron mikroskopu (SEM), tane boyut analizi ve Brunauer-Emmett-Teller (BET) yüzey alanölçümleri ile karakterize edilmiştir. Kalsine FeHT’nin özgül yüzey alanının kalsinasyon sıcaklığı vesüresinden etkilendiği gözlemlenmiştir. Kalsinasyon sonucunca tabakalar arasındaki H2O, OH ve CO2içeriklerinin kaybolarak periklaz yapılarının oluştukları belirlenmiştir. Optimum kalsinasyon şartlarındaFeHT’nin yüzey alanı yaklaşık iki kat arttırılmıştır.

🔖

Cite This Article

BOYRAZ, T., TÜRK, T., ALP, İ. (2020). Investigation of the effect of Calcination on Mg-Fe Hydrotalcite (FeHT). Konya Journal of Engineering Sciences, Cilt: 8 Sayı: 2, 318–327. https://ajindex.com/articles/909174

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Auxilio, A. R., Andrews, P. C., Junk, P. C. ve Spiccia, L., 2009. The adsorption behavior of C.I. Acid Blue 9 onto calcined Mg–Al layered double hydroxides, Dyes anPigments, 81, 103–112.
  2. Beyhan, M., 2003. Atık Çamurlar ve Doğal Malzemeler ile Sulardan Florür İyonu Gideriminin Araştırılması, Doktora Tezi, Fen Bilimleri Enstitüsü, İstanbul.
  3. Bhuiyan, M. M. R., Lin, S.D. ve Hsiao, T.C., 2014. Effect of calcination on Cu–Zn loaded hydrotalcite catalysts for C–C bond formation derived from methanol, Catalysis Today, 226, 150–159.
  4. Bruna, F., Pavlovic, I., Barriga, C., Cornejo, J. ve Ulibarri, M. A., 2006. Adsorption of pesticides carbetamide and metamitron on organohydrotalcite, Applied Clay Science, 33, 116–124.
  5. Chetia, M., Goswamee, L. R., Goswamee, L. R., Banerjee, S., Chatterjee, S., Singh, L., Srivastava, R. B. ve Sarma, H. P., 2012. Arsenic removal from water using calcined Mg–Al layered double hydroxide, Clean Techn. Environ. Policy, 14, 21-27.
  6. Elhalil, A., Qourzal, S., Mahjoubi, F. Z., Elmoubarki, R., Farnane, M., Tounsadi, H., Sadiq, M., Abdennouri, M. ve Barka, N., 2016. Defluoridation of groundwater by calcined Mg/Al layered double hydroxide, Emerging Contaminants, 2, 42-48.
  7. Ferreira, O. P., Alves, O. L., Gouveia, D. X., Souza, A. G., Paiva, J. A. C. ve Filho, J., 2004.
  8. M., Thermal decomposition and structural reconstruction effect on Mg–Fe-based hydrotalcite compounds, Journal of Solid State chemistry, 177, 3058–3069.
  9. Korkmaz, E., 2008. Eskişehir Yöresi Sepiyoliti’nin Zeta Potansiyellerinin Tayini, Yüksek Lisans, Anadolu Üniversitesi Fen Bilimleri Enstitüsü, Eskişehir. Lins, L. C., Bugatti, V., Livi, S. ve Gorrasi, G., 2018.Phosphonium ionic liquid as interfacial agent of layered double hydroxide: Application to a pectin matrix, Carbohydrate Polymers, 182, 142-148.
  10. Mahjoubi, F. Z., Khalidi, A., Abdennouri, M. ve Barka, N., 2017. Zn–Al layered double hydroxides intercalated with carbonate, nitrate, chloride and sulphate ions: Synthesis, characterisation anddye removal properties, Journal of Taibah University for Science, 11, 90-100.
  11. Nalawade, P. ve Hirlekar, R., 2009. Layered Double Hydroxides: A review, Journal of Scientific and Industrial Research, 68, 267-272.
  12. Nishida, S., Takesoe, S., Yamasaki, Y. ve Nakahira, A., 2004. Attempt of arsenic removal in wasted water by ınorganic materials, 14th International Conference on the Properties of Water and Steam, Japan. Palmer, S. J., Frost, R. L. ve Nguyen, T., 2008. Hydrotalcites and their role in coordinat