SavedAdd your journal

Journals / Konya Journal of Engineering Sciences / 2021 / Cilt: 9

Effect of ZnO Concentration on Efficiency in Organic Solar Cells

ZnO konsantrasyonunun organik güneş hücrelerinde verime etkisi

Semih YURTDAŞ
Mustafa KARAMAN
Cem TOZLU
Pages
10–16
Publication Date
2021-12-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

After the studies, it was found that 0.1 M synthesis concentration was the most suitable condition and it was determined that 3.09% efficiency could be reached with the device produced under these conditions.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the effect of the molarity of ZnO synthesized by the sol-gel method on the efficiency of P3HT (Poly (3-hexyl thiophene)):PCBM ((6,6) Phenyl-C61-Butyric acid methyl ester) active layer solar cell was investigated.
📊
Key Findings & Data:It was studied at 0.1, 0.3 and 0.5 M values.
💡
Conclusion & Impact:After the studies, it was found that 0.1 M synthesis concentration was the most suitable condition and it was determined that 3.09% efficiency could be reached with the device produced under these conditions.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:ZnO · Elektron taşıyıcı tabaka · Polimer güneş hücreleri

Abstract

In this study, the effect of the molarity of ZnO synthesized by the sol-gel method on the efficiency of P3HT (Poly (3-hexyl thiophene)):PCBM ((6,6) Phenyl-C61-Butyric acid methyl ester) active layer solar cell was investigated. It was studied at 0.1, 0.3 and 0.5 M values. The efficiency values of the devices were determined with the Keithley 2400 source meter under 100 mw/cm2 solar radiation. In addition, characterization processes were carried out with XRD, UV-Vis and FESEM techniques. After the studies, it was found that 0.1 M synthesis concentration was the most suitable condition and it was determined that 3.09% efficiency could be reached with the device produced under these conditions.

Özet

Bu çalışmada, sol-jel yöntemi ile sentezlenmiş ZnO molaritesinin P3HT (Poli (3-hekzil tiyofen)):PCBM ((6,6) Fenil-C61-Bütirik asit metil ester) aktif tabakalı güneş hücresinde verime olan etkisi incelenmiş ve 0,1, 0,3 ve 0,5 M değerlerinde çalışılmıştır. Aygıtların verim değerleri, 100 mw/cm2 güneş ışıması altında Keithley 2400 kaynak ölçer cihazı yardımı ile belirlenmiştir. Ayrıca XRD, UV-Vis ve FESEM teknikleri ile karakterizasyon işlemleri gerçekleştirilmiştir. Yapılan çalışmalar sonrasında 0,1 M sentez konsantrasyonunun, en uygun koşul olduğu bulunmuş ve bu şartlarda üretilen aygıt ile %3,09 verime ulaşılabildiği tespit edilmiştir.

🔖

Cite This Article

YURTDAŞ, S., KARAMAN, M., TOZLU, C. (2021). Effect of ZnO Concentration on Efficiency in Organic Solar Cells. Konya Journal of Engineering Sciences, Cilt: 9, 10–16. https://ajindex.com/articles/909028

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Afzali, M., Mostafavi, A., Shamspur, T., 2020, “Performance enhancement of perovskite solar cells by rhenium doping in nano-TiO2 compact layer”, Organic Electronics, 86, 105907. Biswas, C., Ma, Z., Zhu, X., Kawaharamura, T., Wang, K. L., 2016, “Atmospheric growth of hybrid ZnO thin films for inverted polymer solar cells”, Solar Energy Materials &Solar Cells Cells (Sol. Energ. Mater. Sol. C.), 157, 1048-1056.
  2. Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., Snaith, H. J., 2013, “Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates”, Nature Communications (Nat. Commun), 4, 2761, 1-6.
  3. Fanady, B., Song, W., Peng, R., Wu, T., Ge, Z., 2020, “Efficiency enhancement of organic solar cells enabled by interface engineering of sol-gel zinc oxide with an oxadiazole-based material”, Organic Electronics, 76, 105483. Guan, H., Xu, W., Li, X., Peng, H., Feng, Y., Zhang, J., Li, C., 2016, “Implementation of photo thermal annealing on ZnO electron transporting layer for high performance inverted polymer solar cells”, Materials Letters, 163, 69-71.
  4. Gui, Z. Z., Liu, X. H., Ming, S. Q., Zhang, J., Y., Xie, Q. M., Chen, T., Wang, H. Q., 2018, “Efficient organic solar cells employing ytterbium ion-doped zinc oxide as cathode transporting layer”, Organic Electronics, 53, 296-302.
  5. Hoye, R. L. Z., Munoz-Rojas, D., Iza, D. C., Musselman, K., P., MacManus-Driscoll, J. L., 2013, “High performance inverted bulk heterojunction solar cells by incorporation of dense, thin ZnO layers made using atmospheric atomic layer deposition”, Solar Energy Materials & Solar Cells (Sol. Energ. Mater. Sol. C.), 116, 197-202.
  6. Lattante, S., 2014, “Electron and hole transport layers: Their use in inverted bulk heterojunction polymer solar cells”, Electronics, 3, 1, 132-164.
  7. Li, S., Zhu, X., Wang, B., Qiao, Y., Liu, W., Yang, H., Liu, N., Chen, M., Lu, H., Yang, Y., 2018, “Influence of Ag Nanoparticles with Different Sizes and Concentrations Embedded in a TiO2 Compact Layer on the Conversion Efficiency of Perovskite Solar Cells”, Nanoscale Research Letters, 13, 210, 1-11.
  8. Liang, Z., Zhang, Q., Wiranwetchayan, O., Xi, J., Yang, Z., Park, K., Li, C., Cao, G., 2012, “Effects of the Morphology of a ZnO Buffer Layer on the Photovoltaic Performance of Inverted Polymer Solar Cells”, Advanced Functional Materials (Adv. Funct. Mater.), 22, 10, 2194-2201.
  9. Lin, C. C., Tsai, S. K., Chang, M. Y., 2017, “Spontaneous growth by sol-gel process of low temperature Z