Journals / Konya Journal of Engineering Sciences / 2023 / Cilt: 11 Sayı: 1

Design and Simulation of Gun Rebound and Rampancy Test Machine

SİLAH GERİ TEPME VE ŞAHLANMA TEST MAKİNASI TASARIMI VE SİMULASYONU

Pages
220–246
Publication Date
2023-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, very important technical findings are obtained for the prototype manufacturing of the testing machine.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In the design of firearms, the energy and force calculations of the mechanism parts and actuation systems are vital for the comfort and effectiveness of the gun.
📊
Key Findings & Data:As a result of these calculations, more comfortable and high performance guns can be designed.
💡
Conclusion & Impact:In addition, very important technical findings are obtained for the prototype manufacturing of the testing machine.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Silah tepme kuvveti · şahlanma momenti · sonlu elemanlar yöntemi

Abstract

In the design of firearms, the energy and force calculations of the mechanism parts and actuation systems are vital for the comfort and effectiveness of the gun. Knowing the forces formed on the gun limbs enables the design of long-lasting parts. Knowing the energy released after the explosion in automatic guns enables optimum calculation of the gas hole diameter and position. As a result of these calculations, more comfortable and high performance guns can be designed. In this study; the novel design and simulation of a rigid test machine is realized using a finite element method which is two degrees of freedom and can measure the rebound force and rampancy moment formed on gun firing and absorbs incoming forces. In addition, very important technical findings are obtained for the prototype manufacturing of the testing machine.

Özet

Ateşli silahların tasarımında mekanizma parçalarının ve tahrik sistemlerinin enerji ve kuvvet hesaplamaları, silahın konforu ve etkinliği açısından hayati önem arz etmektedir. Silah uzuvlarında oluşan kuvvetlerin bilinmesi, uzun ömürlü parçaların tasarımına olanak sağlar. Otomatik silahlarda patlamadan sonra açığa çıkan enerjinin bilinmesi ise gaz deliği çapının ve konumunun optimum hesaplanmasını mümkün kılar. Bu hesapların sonucunda daha konforlu ve performansı yüksek silahlar tasarlanabilir. Bu çalışma kapsamında; silah ateşlenmesinde oluşan tepme kuvvetini ve şahlanma momentini ölçebilen, iki serbestlik dereceli, gelen kuvvetleri sönümleyebilen rijit bir test makinasının Ansys/Workbench programı kullanarak yapısal analizleri, özgün tasarımı ve MATLAB/Simulink ile PID konum kontrol simülasyonları gerçekleştirilmiştir. Ayrıca test makinasının prototip imalatı için oldukça önemli teknik bulgular elde edilmiştir.

🔖

Cite This Article

KOÇ, O., TINKIR, M. (2023). Design and Simulation of Gun Rebound and Rampancy Test Machine. Konya Journal of Engineering Sciences, Cilt: 11 Sayı: 1, 220–246. https://ajindex.com/articles/908938

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Y.A. Çengel and M. A. Boles, Mühendislik Yaklaşımıyla Termodinamik. Yayıncı. Palme Yayıncılık, 1 Ağustos 2013; ISBN-10. 6053551627; ISBN-13. 978-6053551621
  2. M. Ahmadian and J. C. Poynor, “An evaluation of magneto rheological dampers for controlling gun recoil Dynamics”, Shock and Vibration, vol. 8, pp. 147–155, 2001
  3. M. Craig, “Testin machine”, U.S. Patent Office, Feb. 1, 1921
  4. N. Benson, “Process and apparatus for catching machine gun bullets”, US Patent Office, Aug. 15, 1950
  5. G. E. McPherren, “Machine gun testing device”, US Patent Office, May 29, 1951
  6. H. J. Singh and N. M. Wereley “Optimal control of gun recoil using magnetorheological dampers”. In Smart Materials, Adaptive Structures and Intelligent Systems, Vol.45103, pp. 441-450, 2012
  7. H. J. Singh and N. M. Wereley. “Optimal control of gun recoil in direct fire using magnetorheological absorbers”, Smart materials and Structures, 23(5), pp.55-70, 2014
  8. Q. Ouyang, J. Zheng, Z. Li, M. Hu and J. Wang, “Controllability analysis and testing of a novel magnetorheological absorber for field gun recoil mitigation”, Smart Materials and Structures, 25(11), 115041, 2015
  9. X. Y. Liu, D. Wu, J. Hou, “Design and analysis of a scheme for the naval gun test shell entering the bore”, Defence Technology, Volume 17, Issue 4, Pages 1374-1386, 2021
  10. D. K. Noh, Y. K. Kang, J. D. Ji, J. S. Park, J. S. Jang, “Case of Developing Analysis Model for Recoil System for Automatic Gun”, Journal of the Korea Society for Simulation. Vol. 24, No. 4, pp. 35-41, 2015
  11. S. R. Hong, N. M. Wereley, Y. T. Choi and S. B. Choi, “Analytical and experimental validation of a nondimensional bingham model for mixed mode magnetorheological dampers”. J. Sound Vib. Vol. 312, pp. 399–417, 2008
  12. H. Hongsheng, W. Jiong, Q. Suxiang, L. Yancheng and J. Xuezheng, “Investigation on controllability of a magnetorheological gun recoil damper”, Int. Conf. on Information and Automation, pp 1044–1049, 2009
  13. Z. C. Li and J. Wang, “A gun recoil system employing a magnetorheological fluid damper”, Smart Mater. Struct. Vol. 21,105003, 2012
  14. M. Mao, W. Hu, Y. T. Choi, N. M. Wereley, A. L. Browne and J. Ulicny, “Experimental validation of a magnetorheological energy absorber design analysis”, J. Intell. Mater. Syst. Struct., Vol. 25, pp. 352–63, 2014.