Journals / Journal of Sustainable Construction Materials and Technologies / 2022 / Cilt: 7 Sayı: 2

Influence of rice husk ash substitution on some physical, mechanical and durability properties of the metakaolin-based geopolymer mortar

Pages
88–94
Publication Date
2022-06-28
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that RHA could be used as a filling material in metakaolin-based geopolymer mortars, and metakaolin-based geopolymer mortars with 50% RHA substitution can be an alternative to the pure metakaolin-based mortar.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it is aimed to investigate the influence of rice husk ash, which is a waste by-product of industrial production, on ultrasonic pulse velocity, compressive strength, flexural strength and high temperature endurance of the metakaolin-based geopolymer mortar.
📊
Key Findings & Data:For this, the sand was substituted by rice husk ash (RHA) at the rate of 25%, 50% and 75% by wt. in the production of geopolymer mortar.
💡
Conclusion & Impact:The results showed that RHA could be used as a filling material in metakaolin-based geopolymer mortars, and metakaolin-based geopolymer mortars with 50% RHA substitution can be an alternative to the pure metakaolin-based mortar.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Geopolymer mortar · metakaolin · ground granulated blast furnace slag

Abstract

In this study, it is aimed to investigate the influence of rice husk ash, which is a waste by-product of industrial production, on ultrasonic pulse velocity, compressive strength, flexural strength and high temperature endurance of the metakaolin-based geopolymer mortar. For this, the sand was substituted by rice husk ash (RHA) at the rate of 25%, 50% and 75% by wt. in the production of geopolymer mortar. A total of 4 series of metakaolin-based geopolymer mortars (reference series and three series with RHA substitution) were produced. In this study, the geopolymer, in other words, the binder of the mortar was produced by metakaolin and ground granulated blast furnace slag reacting with the mixture of sodium hydroxide (12M NaOH) and sodium silicate (Na2SiO3) solutions. The ratio of metakaolin and reactant mixture (12M NaOH + Na2SiO3) was determined for each series following the preliminary experiments. On the specimens produced as 50 mm cube and 40 x 40 x 160 mm prism, the intended experiments were carried out after specimens underwent curing in a dry oven at 60oC during 72 h and gained strength. The results showed that RHA could be used as a filling material in metakaolin-based geopolymer mortars, and metakaolin-based geopolymer mortars with 50% RHA substitution can be an alternative to the pure metakaolin-based mortar.

🔖

Cite This Article

KABİROVA, A., UYSAL, M. (2022). Influence of rice husk ash substitution on some physical, mechanical and durability properties of the metakaolin-based geopolymer mortar. Journal of Sustainable Construction Materials and Technologies, Cilt: 7 Sayı: 2, 88–94. https://ajindex.com/articles/908182

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Davidovits, J. (2013). A review on Geopolymer cement. www.geopolymer.org/library/technical-papers/21-geopolymer-cement-review-2013 [2] Geopolymer Institute (2006). Geopolymer Cement for mitigation of Global Warming. www.geopolymer.org/applications/global-warming [3] McLellan, B. C., Williams, R. P., Lay, J., Riessen, A., & Corder, G. D. (2011). Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement. Journal of Cleaner Production, 19(9-10), 1080-1090. [4] Thaarrini, J., & Dhivya, S. (2016). Comparative Study on the Production Cost of Geopolymer and Conventional Concretes. International Journal of Civil Engineering Research, 7(2), 117-124. [5] Rajini, B., Narasimha Rao, A. V., & Sashidhar C. (2020). Cost Analysis of Geopolymer Concrete Over Conventional Concrete. International Journal of Civil Engineering and Technology, 11(2), 23-30. [6] Rintala, A., Havukainen, J., & Abdulkareem, M. (2021). Estimating the Cost-Competitiveness of Recycling-Based Geopolymer Concretes. Recycling, 6(3), 46. https://doi.org/10.3390/recycling6030046 [7] Davidovits, J. (2008). Geopolymer Chemistry and Applications, Second Edition, Institut Géopolymère, France, 584 p. [8] Davidovits, J. (2017). Why Alkali-Activated Materials are NOT Geopolymers? www.geopolymer.org/faq/alkali-activated-materials-geopolymers [9] Kriven, W. (2017). The Geopolymer Route to High Tech Ceramic. www.youtube.com/watch?v=9kqAp9XrGWU [10] Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007). The effect of alkali and Si/Al ratio on the development of mechanical properties of metakaolin-based geopolymers. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 292(1), 8-20. [11] Albidah, A., Alghannam, M., Abbas, H., Almusallam, T., & Al-Salloum Y. (2021). Characteristics of metakaolin-based geopolymer concrete for different mix design parameters. Journal of Materials Research and Technology, 10, 84-98. [12] Zaki, A., & Sola, Ö. Ç. (2020). Investigation of Strength and Durability Properties of Mortars with Rice Husk Ash Additive. Alanya Alaaddin Keykubat University (ALKU) Journal of Science, 2(2), 54-61. [13] Mrema, A., & Mboya, H. (2016). Strength properties of rice husk ash-lime mortars. The Sixth International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, 5-7 September. www.researchgate.net/publication/307935431_Strength_properties_of_rice_husk_ash-lime_mortars [14] Kang, S. H.